SunLED

Part Number: SM2DG983W
SUPER FLUX LED LAMP
www.SunLED.com
Features
Package Schematics
● High current operation for greater luminous output
● Low power consumption and thermal resistance
● Can be used with automatic insertion equipment
● RoHS Compliant
Benefits:
●Rugged design allows for easy maintenance
●Robust package for optimum reliability
Typical Applications:
●Automotive side markers
●Gaming and entertainment lighting
●Signs and road hazard indicators
D
E
L
n
u
S
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Absolute Maximum Ratings
(TA=25°C)
M2DG
(InGaN)
Unit
5
V
30
mA
mW
Reverse Voltage
VR
DC Forward Current
IF
Power Dissipation
PD
123
Operating Temperature
TA
-40 ~ +85
Tstg
-55 ~ +85
Storage Temperature
Electrostatic Discharge Threshold
(HBM)
Lead Solder Temperature
[1.5mm Below Seating Plane.][1]
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
450
Operating Characteristics
(TA=25°C)
M2DG
(InGaN)
Unit
Forward Voltage (Typ.) (IF=30mA)
VF
3.3
V
Forward Voltage (Max.) (IF=30mA)
VF
4.1
V
Reverse Current (Max.) (VR=5V)
IR
50
uA
Wavelength of Peak Emission
CIE127-2007*(Typ.)
(IF=30mA)
λP
520*
nm
°C
Wavelength of Dominant Emission
CIE127-2007*(Typ.)
(IF=30mA)
λD
525*
nm
V
Spectral Line Full Width At Half
Maximum (Typ.) (IF=30mA)
△λ
35
nm
C
100
pF
Rθj-pin
150
°C/W
260°C For 5 Seconds
Capacitance (Typ.) (VF=0V, f=1MHz)
Thermal Resistance (Typ.)
1.No Reflow soldering .
Part
Number
SM2DG983W
Emitting
Color
Green
Emitting
Material
InGaN
Lens-color
Water Clear
Luminous Intensity Luminous Flux Wavelength
CIE127-2007*
CIE127-2007* CIE127-2007*
(IF=30mA) cd
λP nm
(IF=30mA) lm
min.
typ.
typ.
2.7*
3.59*
4.3*
520*
Viewing
Angle
2θ 1/2
70°
1.Luminous intensity is measured with an integrating sphere after the device has stabilized.
2.θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
3.LEDs are binned according to their Luminous intensity.
* Luminous intensity / luminous flux value and wavelength are in accordance with CIE127-2007 standards.
Dec 28,2013
SDSA9151
V1-Z
Layout: Maggie L.
P. 1/3
Part Number: SM2DG983W
www.SunLED.com
SUPER FLUX LED LAMP
™ M2DG
D
E
L
n
u
S
Remarks:
If special sorting is required (e.g. binning based on forward voltage,
luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Dec 28,2013
SDSA9151
V1-Z
Layout: Maggie L.
P. 2/3
Part Number: SM2DG983W
SUPER FLUX LED LAMP
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
D
E
L
n
u
S
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes
Dec 28,2013
SDSA9151
V1-Z
Layout: Maggie L.
P. 3/3