Part Number: ZFMOK14C SURFACE MOUNT DISPLAY www.SunLED.com Features Package Schematics ● 0.56 inch digit height ● Robust package ● Low power consumption ● Standard configuration: Gray face w/ white segments ● Standard Package: 400pcs/ Reel ● MSL (Moisture Sensitivity Level): 2a ● RoHS compliant L n MOK D E Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. Absolute Maximum Ratings (TA=25°C) u S MOK (AlGaInP) Reverse Voltage VR Forward Current IF Unit V Forward Voltage (Typ.) (IF=10mA) VF 2 30 mA Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=10mA) λP 610* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=10mA) λD 601* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) △λ 29 nm C 15 pF 195 mA Power Dissipation PD 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 °C Capacitance (Typ.) (VF=0V, f=1MHz) ZFMOK14C Unit V iFS Part Number MOK (AlGaInP) 5 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Storage Temperature Operating Characteristics (TA=25°C) Emitting Color Orange Emitting Material AlGaInP Luminous Intensity Wavelength CIE127-2007* CIE127-2007* (IF=10mA) nm ucd λP min. typ. 31000 14000* 77990 22990* *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Jan 13,2014 610* Description Common Cathode, Rt. Hand Decimal. SDSA5374 V5-X Layout: Maggie L. P. 1/4 Part Number: ZFMOK14C www.SunLED.com SURFACE MOUNT DISPLAY MOK D E L n u S LED is recommended for reflow soldering and soldering profile is shown below. Jan 13,2014 SDSA5374 V5-X Layout: Maggie L. P. 2/4 Part Number: ZFMOK14C SURFACE MOUNT DISPLAY www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Tape Specification (Units : mm) u S L n D E Reel Dimension Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Jan 13,2014 SDSA5374 V5-X Layout: Maggie L. P. 3/4 Part Number: ZFMOK14C SURFACE MOUNT DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Jan 13,2014 SDSA5374 V5-X Layout: Maggie L. P. 4/4