SunLED

Part Number: ZFDGK10C
SURFACE MOUNT DISPLAY
www.SunLED.com
Features
Package Schematics
● 0.4 inch digit height
● Robust package
● Low power consumption
● Standard configuration: Gray face w/ white
segments
● Standard Package: 400pcs/ Reel
● MSL (Moisture Sensitivity Level): 2a
● RoHS compliant
DGK
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Absolute Maximum Ratings
(TA=25°C)
L
n
D
E
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
u
S
DGK
(InGaN)
Unit
Operating Characteristics
(TA=25°C)
DGK
(InGaN)
Unit
5
V
Forward Voltage (Typ.) (IF=10mA)
VF
3
V
25
mA
Forward Voltage (Max.) (IF=10mA)
VF
4.1
V
Reverse Current (Max.) (VR=5V)
IR
50
uA
iFS
150
mA
λP
515*
nm
Power Dissipation
PD
102.5
mW
Wavelength of Peak
Emission CIE127-2007* (Typ.)
(IF=10mA)
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Wavelength of Dominant
Emission CIE127-2007* (Typ.)
(IF=10mA)
λD
525*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
△λ
35
nm
C
45
pF
Reverse Voltage
VR
Forward Current
IF
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
Storage Temperature
Electrostatic Discharge Threshold
(HBM)
450
°C
V
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
ZFDGK10C
Emitting
Color
Green
Emitting
Material
InGaN
Luminous Intensity
CIE127-2007*
(IF=10mA)
ucd
min.
typ.
88000
31000*
189990
64990*
Wavelength
CIE127-2007*
nm
λP
Description
515*
Common Cathode,
Rt.Hand Decimal.
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Jan 08,2014
SDSA9188
V1-X
Layout: Maggie L.
P. 1/4
Part Number: ZFDGK10C
www.SunLED.com
SURFACE MOUNT DISPLAY
™ DGK
D
E
L
n
u
S
LED is recommended for reflow soldering and
soldering profile is shown below.
Jan 08,2014
SDSA9188
V1-X
Layout: Maggie L.
P. 2/4
Part Number: ZFDGK10C
SURFACE MOUNT DISPLAY
www.SunLED.com
™ Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15)
™ Tape Specification (Units : mm)
u
S
L
n
D
E
™ Reel Dimension
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the
typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Jan 08,2014
SDSA9188
V1-X
Layout: Maggie L.
P. 3/4
Part Number: ZFDGK10C
SURFACE MOUNT DISPLAY
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
D
E
L
n
u
S
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes
Jan 08,2014
SDSA9188
V1-X
Layout: Maggie L.
P. 4/4