SunLED

Part Number: ZMOK45WT
3.5x2.8mm PLCC2 SMD LED
www.SunLED.com
Package Schematics
Features
● Ideal for indication light on hand held products
● Long life and robust package
● Standard Package: 2000pcs/ Reel
● MSL (Moisture Sensitivity Level): 4
● RoHS compliant
D
E
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
u
S
MOK
(AlGaInP)
Reverse Voltage
VR
5
Forward Current
IF
30
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
Power Dissipation
Operating Temperature
Storage Temperature
L
n
Unit
V
Operating Characteristics
(TA=25°C)
ZMOK45WT
Unit
mA
Forward Voltage (Typ.)
(IF=20mA)
VF
2.1
V
195
mA
Forward Voltage (Max.)
(IF=20mA)
VF
2.5
V
PD
75
mW
Reverse Current (Max.)
(VR=5V)
IR
10
uA
TA
-40 ~ +85
λP
610*
nm
Tstg
-40 ~ +85
Wavelength of Peak
Emission CIE127-2007* (Typ.)
(IF=20mA)
Wavelength of Dominant
Emission CIE127-2007* (Typ.)
(IF=20mA)
λD
601*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
△λ
29
nm
C
15
pF
°C
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
MOK
(AlGaInP)
Emitting
Color
Orange
Emitting
Material
AlGaInP
Lens-color
Water Clear
Luminous Intensity
CIE127-2007*
(IF=20mA)
mcd
min.
typ.
200
120*
347
228*
Wavelength
CIE127-2007*
nm
λP
Viewing
Angle
2θ 1/2
610*
120°
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Feb 22,2014
SDSA8894
V2-X
Layout: Maggie L.
P. 1/4
Part Number: ZMOK45WT
3.5x2.8mm PLCC2 SMD LED
www.SunLED.com
™ MOK
D
E
L
n
u
S
LED is recommended for reflow soldering and
soldering profile is shown below.
Feb 22,2014
SDSA8894
V2-X
Layout: Maggie L.
P. 2/4
Part Number: ZMOK45WT
3.5x2.8mm PLCC2 SMD LED
www.SunLED.com
™ The device has a single mounting surface.
The device must be mounted according to
the specifications.
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
™ Reel Dimension
L
n
u
S
™ Tape Specification (Units : mm)
D
E
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Feb 22,2014
SDSA8894
V2-X
Layout: Maggie L.
P. 3/4
Part Number: ZMOK45WT
3.5x2.8mm PLCC2 SMD LED
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
D
E
L
n
u
S
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes
Feb 22,2014
SDSA8894
V2-X
Layout: Maggie L.
P. 4/4