HG5 Series - TOSHIBA Semiconductor & Storage Products Company

Brief Specification
Client SSD
HG5 Series
Form Factor
2.5-inch {64 mm} Case
(9.5 mmH)
2.5-inch {64 mm} Case
(7.0 mmH)
mSATATM *1 Module
Model Number
THNSNFxxxGBSS
THNSNFxxxGCSS
THNSNFxxxGMCS
TOSHIBA 19 nm MLC NAND Flash Memory
Memory
Interface
*2
Capacity
*2
Performance *2*3
ACS-2, SATA revision 3.1 6 Gbit/s
60/128/256/512 GB
60/128/256 GB
Sequential Read (max): 534 MB/s{510 MiB/s}
Sequential Write (max): 482 MB/s{460 MiB/s}(2.5-inch {64 mm} 512 GB)
Supply Voltage
5.0 V ±5 %
3.3 V ±5 %
Power
Consumption
Active: 3.3 W typ.
Idle: 65 mW typ.
Active: 2.7 W typ.
Idle: 60 mW typ.
Temperature
Operating: 0 °C - 70 °C
(case temperature)
Non-operating: -40 °C – 85 °C
Operating: 0 °C - 80 °C
(components temperature)
Non-operating: -40 °C – 85 °C
Shock
14.7 km/s2 {1500 G} at 0.5 ms
Vibration
Operating / Non-operating: 196 m/s2 {20 G} at 10-2,000 Hz
Mean Time to Failure (MTTF): 1,500,000 hours, Design Product Life: 5 years
Reliability
Size
100.0 mm x 69.85 mm
x 9.5 mm
x 9.5 mm
100.0 mm x 69.85 mm
x 7.0 mm
50.95 mm x 30.0 mm
x 3.95 mm
Weight
51-55 g typ.
49-53 g typ.
7.5-7.8 g typ.
More Features
・ Translation mode which enables any drive configuration
・ 28-bit LBA mode commands and 48-bit LBA mode commands support
・ Multi word DMA, Ultra-DMA, Advanced PIO mode
・ Automatic retries and corrections for read errors
*1) mSATA™ is an unregistered trademark of Serial ATA International Organization.
*2) 1 MB = 1,000,000 bytes, 1 GB = 1,000,000,000 bytes, 1 Gbit = 1,000,000,000 bits
*3) 1 MiB (mebibytes) = 220 bytes = 1,048,576 bytes