SQXO-2AT OSCILLATOR 500 kHz to 120 MHz ™ DESCRIPTION STATEK’s SQXO-2AT crystal oscillator consists of a TTL and CMOS-compatible hybrid circuit and a miniature AT quartz crystal packaged in a hermetically-sealed 3-pin TO-39 package. FEATURES CMOS and TTL compatible Low EMI emission Wide temperature range Full military testing available PACKAGE DIMENSIONS Hermetically sealed A E APPLICATIONS B Industrial, Computer & Communications TOP VIEW General purpose clock oscillator C Military & Aerospace D Airborne hybrid computer Flight recorder G F 3 1 OUTPUT WAVE FORM 2 VDD VOH VOL 0 BOTTOM VIEW 90%* 10%* * Of VDD tr tf DIM INCHES mm A 0.380 MAX. 9.65 MAX. B 0.185 MAX. C 0.500 MIN. D 0.029 E 0.326 MAX. 8.28 MAX F 0.200 REF. 5.08 REF. G 45O 4.70 MAX. 12.70 MIN. 0.74 45O Note: 1. All metal parts gold plated 2. Leads are 0.019 in.[0.48mm] MAX. 10128 - Rev D STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS Specifications are typical at 25oC unless otherwise noted. Specifications are subject to change without notice. Supply Voltage VDD -0.3V to 7.0V Storage Temperature -55OC to +125OC Maximum Process Temp. 260OC, 10 seconds Supply Voltage (VDD) 5V +_ 10% (3.3V available) Calibration Tolerance* A: + _ B: + _ 0.03% C: + _ 0.1% Frequency Stability*/** (at 5V) Supply Current 0.01% (100ppm) PIN CONNECTIONS O O + _ O O + _ O O -40 C to +85 C from + _ -55OC to +125OC from + _ 0 C to +50 C from -10 C to +70 C from 5 to + _ 30ppm 10 to + _ 50ppm 20 to + _ 100ppm 30 to + _ 100ppm VDD 2. Output 3. Ground 1. 10 mA for 50 MHz 8 mA for 40 MHz TEST CIRCUITS 6 mA for 30 MHz 4 mA for 24 MHz Start-up Time 5 msec. MAX. Rise/Fall Time 3 nsec. Typ., 6 nsec. MAX. Duty Cycle* 40% Min., 60% MAX. Aging, first year 10 ppm MAX. Shock, survival*** 1,000g peak .3 msec., 1/2 sine Vibration survival 10g rms 10-2000 Hz random (1) 10 TTL Test Circuit 390 ohms +mAMeter 2 1 Operating Temperature**** -10OC to +70OC Commercial -40OC to +85OC Industrial -55OC to +125OC Military + + - V DD - Oscillator 0.1 F Volt Meter 15 pF 3 (2) HCMOS Test Circuit +mAMeter * Tighter tolerances available for calibration, stability and duty cycle. ** Does not include calibration tolerance. *** High shock version available. **** Consult factory for operating temperatures above 125OC. Note: All parameters are measured at ambient temperature with a 10M⍀ and 15pF load at 5V 1 + + - V DD - Volt Meter 2 Oscillator 0.1 F 15 pF 3 PACKAGING SQXO-2AT - Tray Pack (Standard) HOW TO ORDER SQXO-2AT CRYSTAL OSCILLATORS SQXO-2AT S 32 MHz “S” if special or custom design. Blank if Std. Frequency ( 100ppm Calibration Tolerance* @ 25OC (A) (B) (C) / 100ppm Frequency Stability over Temp. Range / 200ppm Total Frequency Tolerance / I ) Temp. Range: C = Commercial I = Industrial M = Military S = Specialty * Other calibration fill in ppm 10128 - Rev D STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com