LFXO TF OSCILLATOR 32.768 kHz Low Power Consumption Miniature Surface Mount Crystal Oscillator DESCRIPTION Statek’s 32.768 kHz LFXO oscillators, designed especially for applications requiring low power consumption, as low as 500 nA, consist of a Statek miniature Tuning Fork quartz crystal and a CMOS/TTL compatible hybrid circuit in a ceramic package. Each crystal is pre-qualified before assembly into the oscillator through electrical tests and characterization over temperature. FEATURES Low power Tight frequency tolerance CMOS output Optional output Enable/Disable with Tri-State Low EMI emission Full military testing available DIMENSIONS D 2 A TOP 3 BOTTOM APPLICATIONS 1 4 D Medical Military & Aerospace Industrial, Computer & Communications B TYPICAL SUGGESTED LAND PATTERN E C MAXIMUM DIM inches mm inches mm A 0.256 6.50 0.263 6.68 B 0.197 5.00 0.204 5.18 0.063 C (SM1) C (SM3/SM5) 0.067 1.60 1.70 0.065 0.073 1.65 1.85 D 0.055 1.40 0.065 1.65 E 0.060 1.52 0.070 1.78 PIN CONNECTIONS ENABLE/DISABLE 1. Not connected (N) or Enable (T) 2. Ground 3. Output 4. VDD IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 90 01 TEM C ERT I F I C AT N IO S 10195 Rev A YS SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Supply Voltage VDD Storage Temperature Process Temperature Supply Voltage + _ 1.8V to 5V 1 Calibration Tolerance + _ 10 ppm + _ 50 ppm + _ 100 ppm 10% ELECTRICAL CHARACTERISTICS All parameters are measured at ambient temperature with a 10MΩ and 15pF load at 5V. SYMBOL PARAMETER 2 Frequency Stability + _ 0OC to +50OC -20OC to +70OC -55OC to + 125OC 25 ppm + _ 70 ppm + _ 310 ppm + _ Aging + _ Vibration4 20 g RMS, 10 - 2000 Hz Operating Temp. Range TYP. MAX. UNIT Output Voltage Hi V OL Output Voltage Lo 4.8 tr Rise Time (10%-90%) 12 25 nsec. tf Fall Time (10%-90%) 12 25 nsec. 50 55 % Duty Cycle 45 4.95 V 0.05 0.2 V OUTPUT WAVE FORM 5,000 g, 0.3 ms, ½ sine + _ MIN. V OH SYM 1 ppm/year Typ. 3 ppm/year MAX Shock3 Frequency Change vs 10%Output Load Change 0.5V to 7V -55OC to +125OC 260OC 20 sec. VDD VOH 90%* 1 ppm MAX. -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) VOL 0 10%* tr 1. Tighter tolerances available. tf * Of VDD 2. Does not include calibration tolerance. Positive variations are much smaller. 3. High shock version is available. Please contact factory. 4. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. TYPICAL CURRENT CONSUMPTION 5. Measurements were done with no load condition. Idd5 (uA) Vdd (V) 1.8 0.5 2.5 0.6 3.3 0.7 5.0 1.3 HOW TO ORDER 32.768 kHz LFXO OSCILLATORS/ULTRA LOW POWER LFXO TF = Low Power TF 3 S T SM3 1 = 1.8V 2 = 2.5V 3 = 3.0V 4 = 3.3V 5 = 5.0V S = Special or Custom Blank = Std. Enable/Disable Option T or N Termination Blank = SM1 = Gold Plated (Pb Free) SM3 = Solder Dipped SM5 = Solder Dipped (Pb Free) 32.768K , Frequency K = kHz 30 30 / Calibration Tolerance @ 250C (in ppm) / / Frequency Stability over Temp.Range (in ppm) I Temperature Range C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified OR / / 50 Total Frequency Tolerance (in ppm) / I Temperature Range C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 10195 Rev A STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com