CX2HSM CRYSTAL 16 kHz to 600 kHz Miniature Surface Mount Quartz Crystal for Series Oscillators ™ DESCRIPTION The CX2HSM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. These miniature crystals are intended to be used in Series oscillators. They are hermetically sealed in a rugged, miniature ceramic package. The CX2HSM crystal is manufactured using the STATEK-developed photolithographic process, and was designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. Maximum process temperature should not exceed 260OC. actual size side view Glass Lid Shown PACKAGE DIMENSIONS B 1 2 A I FEATURES H G 3 Miniature tuning fork design F High shock resistance D Compatible with hybrid or PC board packaging E C Low aging Full military testing available TYP. Designed and manufactured in the USA SUGGESTED LAND PATTERN 0.105 (2.67) 0.113 (2.87) GRID COURTYARD 1 2 0.060 (1.52) inches (mm) 0.060 (1.52) DIM inches mm inches mm A 0.260 6.60 0.275 6.99 B 0.094 2.39 0.108 2.74 C - - D 0.035 0.89 0.045 1.14 E 0.059 1.50 0.069 1.75 see below F 0.050 1.27 0.060 1.52 G 0.105 2.67 0.115 2.92 H 0.155 3.94 0.165 4.19 I 0.210 5.33 0.220 5.59 DIM “C” CONVENTIONAL SERIES OSCILLATOR CIRCUIT MAX. GLASS LID CERAMIC LID MAX inches mm inches mm SM1 0.065 1.65 0.075 1.91 SM2 0.067 1.70 0.077 1.96 SM3 0.070 1.78 0.080 2.03 Note: Terminal 1 is electrically connected internally to terminal 3 EQUIVALENT CIRCUIT OSCILLATOR CX2H CX-2HXTAL XTAL BUFFER Contact factory for design guidelines C0 1 L1 C1 R1 2 R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S 10137 - Rev B FIGURE 1 CX2H TYPICAL MOTIONAL RESISTANCE (R1) SPECIFICATIONS 1000 Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Frequency Range 16 kHz to 600 kHz 500 Motional Resistance (R1) Figure 1 MAX: 16-169.9 kHz, 2x Typ. R1(k) Standard Calibration Tolerance* (see table below) 170-600 kHz, 2.5x Typ. Motional Capacitance (C1) Figure 2 Quality Factor (Q) Figure 3 MIN is 0.25x Typ. Shunt Capacitance (C0) 2.0 pF MAX. Drive Level 16-24.9 kHz 1.5 µW MAX. 25-600 kHz 3.0 µW MAX. Turning Point (T0)** Figure 4 50 20 10 5 ppm MAX Shock, survival*** 1,500 g peak, 0.3 ms, 1/2 sine Vibration, survival*** 10 g RMS 20-2,000 Hz Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) -55OC to +125OC Max Process Temperature 260O C for 20 sec. CX2H Standard Calibration Tolerance at 250C 170-249.9 + _ + _ 100 ppm (0.01%) + _ 1000 ppm (0.1%) 100 ppm (0.01%) + _ 1000 ppm (0.1%) 200 ppm (0.02%) + _ 2000 ppm (0.2%) S “S” if special or custom design. Blank if Std. C SM1 32.768K , Frequency K = kHz Calibration Tolerance @ 25OC (in ppm) SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped Blank = Glass Lid C = Ceramic Lid 30 50 100 200 20 10 5 16 200 ppm (0.02%) 500 ppm (0.05%) 5000 ppm (0.5%) / M Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 100 200 600 FIGURE 4 CX2H TYPICAL TURNING POINT TEMP. (T0) + _ + _ 50 Frequency (kHz) + _ +80 +70 +60 +50 +40 +30 +20 +10 0 -10 -20 16 50 100 200 600 Frequency (kHz) Note: Frequency f at temperature T is related to frequency f0 at turning point temperature T0 by: f-f0 = k(T-T )2 0 f0 TERMINATIONS PACKAGING OPTIONS Designation SM1 SM2 SM3 CX2HSM - Tray Pack -16mm tape, 7” or 13” reels (Reference tape and reel data sheet 10109) 10137 - Rev B IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S Termination Gold Plated Solder Plated Solder Dipped 600 2 250-600 HOW TO ORDER CX2HSM CRYSTALS CX2H 16 FIGURE 3 CX2H TYPICAL QUALITY FACTOR (Q) O + _ 100 ppm (0.01%) 1.0 Frequency (kHz) TO( C) 50 ppm (0.005%) 600 2 0.5 Frequency Range (kHz) 30 ppm (0.003%) 200 50 * Tighter frequency calibration available. ** Other turning point available. *** Higher shock and vibration available. + _ 100 FIGURE 2 CX2H TYPICAL MOTIONAL CAPACITANCE (C1) (in 1000's) Storage Temp. Range + _ 50 Frequency (kHz) C1(fF) Aging, first year + _ 16 2 Temperature Coefficient (k) -0.035 ppm/ C 75-169.9 100 5 O 16-74.9 200