® FIELD INSTALLABLE SHIELDED MULTI-CON-X® Conxall® introduces its newest series of “Con-X” product, the Field Installable Shielded Multi-Con-X®. This product was designed for field installations where: • Circuits must be protected from electromagnetic or radio frequency interference • Surrounding equipment must be protected from circuit emmittance • An earth ground must be carried via the cable shield through the connector shell, coupling ring, and receptacle to ground (panel). The Field Installable Shielded Multi-Con-X® offers a simple, unique method of completing the shield between the cable and the connector housing (requiring no additional or special installation tools). The backshell can be assembled with nothing more than a screwdriver. Features 6 keyway orientations available 2 - 9 pole insert configurations with 20 size contacts available in 4 keying arrangements 2 - 12 pole insert configurations with 20 size contacts available in 1 keying arrangement 2 - 4 pole insert configurations with 16 size contacts available in 1 keying arrangement Panel Mounts are available with male contacts only (solder or P.C. Tail termination) Cable Ends are available with female contacts only (solder termination) Not mateable with standard (unshielded) Multi-Con-X® product Panel Mounts are available with a metal or plastic housing • • • • • • • • Specifications Electrical Rating 600 Volts RMS 13A: 4 maximum #16 contacts with 16 AWG wire 7.5A: 3 maximum #20 contacts with 20 AWG wire 5.6A: 12 maximum #20 contacts with 20 AWG wire Cable Ends Coupling Nut & Housing: Nickel Plated Brass Contacts: Copper Alloy, 30 µ in. min. Gold over 50 µ in. min. Nickel Plating Insert: Engineered Polyester Resin Backshell & Strap: G.F. Nylon Screws: Stainless Steel O-Rings: Neoprene Metal Panel Mounts Shell: Nickel Plated Brass Nut: Nickel Plated Brass Contacts: Copper Alloy, 30 µ in. min. Gold over 50 µ in. min. Nickel Plating Insert: Engineered Polyester Resin Plastic Panel Mounts Housing: Engineered Polyester Resin Shielding Nut: Nickel Plated Aluminum Contacts: Copper Alloy, 30 µ in. min. Gold over 50 µ in. min. Nickel Plating Environmental: Temperature: -40°C (-40°F) to +120°C (+248°F) RoHS Compliant ® a Co. w w w . c o n x a l l . c o m 5555 North Elston Avenue, Villa Chicago, 773-792-2700, 773-792-2129 601 E. Wildwood Park, IL IL 60630, 60181, Phone: Phone (630) 834-7504, Fax: Fax (630) 834-8540 PRODUCT BULLETIN C701 2 FIELD INSTALLABLE SHIELDED MULTI-CON-X PRODUCT BULLETIN C701 ® Cable End 2.126" [54.0mm] 0.995" [25.3mm] 1.726" [43.8mm] Panel Mount 3/4-20 UNEF-2A THREAD 0.730" [19.1mm] Front View Cut-out ø0.770" [20.0mm] RECOMMENDED PANEL CUT-OUT ±0.003" Metal 3/4-20 UNEF-2A THREAD W/PC-TAIL CONTACTS Plastic 3/4-20 UNEF-2A THREAD W/ SOLDER CUP CONTACTS 3/4-20 UNEF-2A THREAD W/PC-TAIL CONTACTS 0.826" [21.0mm] 0.826" [21.0mm] 0.826" [21.0mm] 0.271" [6.9mm] 0.202" [5.1mm] 0.060" to 0.180" PANEL [1.5mm to 4.6mm] 0.826" [21.0mm] 0.202" [5.1mm] 0.271" [6.9mm] 0.621" [15.8mm] 0.621" [15.8mm] 0.621" [15.8mm] 3/4-20 UNEF-2A THREAD W/ SOLDER CUP CONTACTS 0.060" to 0.180" PANEL [1.5mm to 4.6mm] 0.621" [15.8mm] 0.110" to 0.140" PANEL [2.8mm to 3.6mm] 0.110" to 0.140" PANEL [2.8mm to 3.6mm] Insert Platforms (Wiring View of Cable End) Keying A B Max Contact Count/Contact Size 9/#20 9/#20 (For less than full complement insert patterns, consult factory) C D E F 9/#20 9/#20 12/#20 4/#16 Code Logic SF Shielded Field Installable 4 2 82 V Contact Size 2 - #20 3 - #16 Multi-Con-X 3 - Cable End 4 - Panel Mount Contact Style 81 - PC Tail (Panel Only) 82 - Solder Cup - 12 # of Contacts 2 - 12 E P Contact Type Pin (Panel Mount) Socket (Cable End) Keying A - D (2 - 9 #20 Contacts) E (2 - 12 #20 Contacts) F (2 - 4 #16 Contacts) Insert & Shell Material Only “Blank” - Engineered Polyester Resin Insert (Cable End Only) “Blank” - Nickel Plated Brass Panel Mount Shell with an Engineered Polyester Resin Insert V - One Piece Engineered Polyester Resin Panel Mount Shell G - 3ES Plating Gold Backshell and Panels 3ES: Panel w/ Epoxy 520: Backshell w/ .200"Grommet ID 540: Backshell w/ .400"Grommet ID (Consult Factory for Other Sizes)