2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. NOTES: 1. TO BE USED WITH PANDUIT METAL BANDING MBH-MR & MBH-TLR. 2. APPLICATION TOOL: GS4MT, ST2MT, PPTMT, ST3MT, OR HTMT. 3. TOOL TENSION SETTING: 4 TO 8 (GS4MT AND PPTMT ONLY) 4. DIMENSIONS IN [ B ] ARE MILLIMETERS. 31 6 B 5. A MINIMUM LOOP TENSILE STRENGTH: 250 LBS (1112 N) B 6. TOLERANCES: .X = .030[.762] .XX = .020[.508] .XXX = .010[.254] ANGLES = 2 .51 12.878 .20 5.19 .392 10.0 .020 0.5 TITLE METAL TIE HEAD HEAVY PART NUMBER MTHH-C316 A CUSTOMER DRAWING ITEM REVISION NAME N41131BS/03 03A 03/13 JAMB MIM RGRO 02A 10/03 JAMB SKB JJB 01 10/03 BRH DPN 00 11/02 JAMB DPN UPDATE DRAWING TO NEW GLOBAL PANDUIT TITLE BLOCK WITH PANDUIT LOGO ORIG CAD FILE SPEC WAS S41131_01, ORIG DRAWING NUMBER SSECN01042 DATASET FILE NAME N41131BS_DC/03A MATERIAL: WAS S41131 ----- JJB A ADDED ST3MT TO TOOL APPLICATION NOTE. B ADDED MINIMUM LOOP TENSILE STRENGTH NOTE 11162 JJB DRAWING RELEASED 10401 UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] .X .XX .1 [2.54] .01 [.25] .XXX ANGLES .005 [.127] 5 316 STAINLESS STEEL DRAWING NUMBER: THIRD ANGLE PROJECTION DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN JAMB DATE CHK 11/02 N41131BS_DC SIZE SCALE 4:1 DPN 1 SHT 1 OF 1 A A