APD Series: Silicon PIN Diodes, Packaged and Bondable Chips

DATA SHEET
APD Series: Silicon PIN Diodes, Packaged and Bondable
Chips
Applications
 Switches
 Attenuators
Features
 Established Skyworks PIN diode process
 Low capacitance designs to 0.05 pF
 Voltage ratings to 200 V
 Chip size < 15 mils square
 Tight control of I layer base width
 Mesa and planar chip designs
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Description
Skyworks APD series of silicon PIN diodes are designed for use as
switch and attenuator devices in high-performance RF and
microwave circuits. The PIN diode designs are useful over a wide
range of frequencies from below 100 MHz to beyond 30 GHz.
These devices use Skyworks well-established silicon technology
resulting in PIN diodes with tightly controlled I-region
characteristics.
The low capacitance and low resistance of the APD0505 through
APD1520 diodes are ideal for switch applications that require
insertion loss and fast switching speed. For switch or attenuator
applications requiring high power and low distortion, the thick Iregion and high reverse breakdown voltage of the APD2220 is
ideal.
The absolute maximum ratings of the APD diode series are
provided in Table 1. Electrical specifications are provided in
Table 2. Table 3 identifies the die part numbers with their
corresponding top contact diameters and die outline drawings.
Table 4 identifies the hermetic part numbers together with their
thermal resistance specifications and hermetic outline drawings.
Typical performance characteristics are provided in Figures 1
through 8.
Skyworks Solutions, Inc.  Phone [781] 376-3000 • Fax [781] 376-3100  [email protected]  www.skyworksinc.com
200075Q  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  June 2, 2014
1
DATA SHEET  APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS
Table 1. APD Series Absolute Maximum Ratings
Parameter
Symbol
Minimum
Typical
Maximum
Units
Power dissipation
PDIS
Maximum TJ  Case Temp
Thermal Re sis tan ce junctiontocase
W
Reverse voltage
VR
See Voltage Rating column in Table 2
V
Forward current
IF
200
mA
Operating temperature
TOP
–65
+175
C
Storage temperature
TSTG
–65
+200
C
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 2. APD Series Electrical Specifications (Note 1)
(TOP = +25 C, Unless Otherwise Noted)
Junction
Capacitance
(CJ)
VR = 50 V,
1 MHz
(pF)
Junction
Capacitance
(CJ)
VR = 0 V,
1 MHz
(pF)
Series
Resistance (RS),
I = 10 mA,
500 MHz
(Ω)
Minority Carrier
Lifetime (TL)
I = 10 mA
(ns)
Maximum
Typical
Maximum
Typical
APD0505-000
0.05
0.10
2.5
70
APD0510-000
0.10
0.20
1.5
90
APD0520-000
0.20
0.25
1.0
120
50
5
55
APD0805-000
0.05
0.10
2.0
100
100
8
87
APD0810-000
0.10
0.15
1.5
160
100
8
60
APD1505-000
0.06 @ 10 V
0.12
2.5
350
200
15
60
APD1510-000
0.10
0.20
2.0
300
200
15
56
APD1520-000
0.20
0.25
1.2
900
200
15
44
0.20
0.35
4.0
700
100
50
18
Parameter
I-Region
Thickness
(μm)
Thermal
Resistance
(θJC)
(C/W)
Nominal
Maximum
50
5
118
50
5
76
Voltage
Rating
(Note 2)
(V)
Switching Applications
Attenuator Applications
APD2220-000
Note 1: Performance is guaranteed only under the conditions listed in this table.
Note 2: Reverse current is specified at 10 μA maximum at the voltage rating noted. Do not exceed this voltage.
Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  [email protected]  www.skyworksinc.com
2
June 2, 2014  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  200075Q
DATA SHEET  APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS
Table 3. APD Series Parts
Part Number
Top Contact Diameter (±0.5 mils)
Die Drawing
APD0505-000
1.50
150-806
APD0510-000
2.30
150-801
APD0520-000
3.05
150-801
APD0805-000
2.25
150-801
APD0810-000
3.05
150-801
APD1505-000
2.75
150-806
APD1510-000
3.50
150-813
APD1520-000
5.00
150-802
8.50
149-815
Switching Applications
Attenuator Applications
APD2220-000
Table 4. Hermetic Packages
Hermetic Pill
Drawing
Typical
Thermal
Resistance
(θjc)
(°C/W)
Hermetic Pill
Drawing
Typical
Thermal
Resistance
(θjc)
(°C/W)
232
APD0505-210
133
APD0505-219
201
189
APD0510-210
90
APD0510-219
158
APD0520-203
167
APD0520-210
59
APD0520-219
136
182
APD0805-203
201
APD0805-210
107
APD0805-219
170
155
APD0810-203
174
APD0810-210
75
APD0810-219
143
APD1505-240
150
APD1505-203
172
APD1505-210
74
APD1505-219
142
APD1510-240
149
APD1510-203
168
APD1510-210
70
APD1510-219
137
APD1520-240
136
APD1520-203
155
APD1520-210
57
APD1520-219
124
APD2220-240
115
APD2220-203
132
APD2220-210
32
APD2220-219
104
Hermetic Pill
Drawing
Typical
Thermal
Resistance
(θjc)
(°C/W)
214
APD0505-203
170
APD0510-203
APD0520-240
148
APD0805-240
APD0810-240
Hermetic Stripline
Drawing
Typical
Thermal
Resistance
(θjc)
(°C/W)
APD0505-240
APD0510-240
Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  [email protected]  www.skyworksinc.com
200075Q  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  June 2, 2014
3
DATA SHEET  APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS
Typical Performance Characteristics at 25 °C
1000
1000
APD2220-000
100
Resistance (Ω)
Resistance (Ω)
100
APD0805-000
10
1
APD0505-000
10
APD0810-000
APD0510-000
1
APD1510-000
0.1
0.01
0.1
1
10
0.1
0.01
100
0.1
Forward Current (mA)
10.0
1.0
0.1
0.01
0.10
1
10
160
140
120
100
80
60
40
20
0
100
APD0505
APD0510
APD0520
APD0805
APD0810
APD1505
APD1510
APD1520
APD2220
180
Y0246
Maximum CW Input Power (W)
200
100.0
25
50
Forward Current (mA)
20
0
25
50
75
100
125
150
175
150
175
Case Temperature (°C)
Figure 5. Maximum CW Input Power vs Case Temperature
(-210 Package)
APD0505
APD0510
APD0520
APD0805
APD0810
APD1505
APD1510
APD1520
APD2220
25
20
15
10
5
Y0248
Y0247
40
Maximum CW Input Power (W)
60
125
30
APD0505
APD0510
APD0520
APD0805
APD0810
APD1505
APD1510
APD1520
APD2220
80
100
Figure 4. Maximum CW Input Power vs Case Temperature
(-000 Package)
120
100
75
Case Temperature (°C)
Figure 3. Resistance vs Forward Current @ 500 MHz
(APD1505-000 Package)
0
25
50
75
100
125
150
175
Case Temperature (°C)
Figure 6. Maximum CW Input Power vs Case Temperature
(-203 Package)
Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  [email protected]  www.skyworksinc.com
4
100
Figure 2. Resistance vs Forward Current @ 1 GHz
1000.0
Resistance (Ω)
10
Forward Current (mA)
Figure 1. Resistance vs Forward Current @ 1 GHz
Maximum CW Input Power (W)
1
June 2, 2014  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  200075Q
DATA SHEET  APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS
35
25
20
15
10
5
APD0505
APD0510
APD0520
APD0805
APD0810
APD1505
APD1510
APD1520
APD2220
30
25
20
15
10
5
Y0250
30
Maximum CW Input Power (W)
APD0505
APD0510
APD0520
APD0805
APD0810
APD1505
APD1510
APD1520
APD2220
Y0249
Maximum CW Input Power (W)
35
0
0
25
50
75
100
125
150
25
175
50
75
100
125
150
175
Case Temperature (°C)
Case Temperature (°C)
Figure 8. Maximum CW Input Power vs Case Temperature
(-240 Package)
Figure 7. Maximum CW Input Power vs Case Temperature
(-219 Package)
Package Outline Drawings
Package outline die drawings for the APD diode series are shown
in Figures 9 and 10. Hermetic package outlines are shown in
Figures 11 through 14.
Die Packages
Schematic
1
Anode
Top Contact, Gold
0.002 (0.051 mm)
Diameter Minimum
[0.008 (0.203 mm) Diameter
for the APD2220-000]
2
0.014 ± 0.001
(0.356 ± 0.025 mm)
0.014 ± 0.001
(0.356 ± 0.025 mm)
0.004 (0.10 mm)
0.006 (0.15 mm) Nominal
1
Cathode Metallized Back
Contact, Gold
2
S1565a
Figure 9. 149-815 Package
Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  [email protected]  www.skyworksinc.com
200075Q  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  June 2, 2014
5
DATA SHEET  APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS
Schematic
Anode
Metallized
Gold Dot
0.010 (0.254 mm) Min.
0.014 (0.356 mm) Max. Sq.
1
2
150-801:
0.002 (0.051 mm) Min.
[0.0015 (0.038 mm) Min.
for the APD0805-000]
150-806:
0.0011 (0.028 mm) Nom.
1
0.004 (0.10 mm) Min.
0.006 (0.15 mm) Max.
Silicon
2
Cathode Metallized Back
Contact: Gold
S1567a
Figure 10. 150 Series Package
Hermetic Packages
Schematic
N-Type
1
1
0.050 (1.27 mm)
0.040 (1.02 mm)
2
2
0.055 (1.40 mm)
0.051 (1.30 mm)
Dia.
S1569
Figure 11. -203 Package
Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  [email protected]  www.skyworksinc.com
6
June 2, 2014  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  200075Q
DATA SHEET  APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS
Schematic
1
0.064 (1.63 mm)
0.060 (1.52 mm)
2 Places
0.124 (3.15 mm)
0.119 (3.02 mm) Dia.
2
0.025 (0.63 mm)
Max.
1
0.097 (2.46 mm)
0.083 (2.11 mm)
0.225 (5.72 mm)
0.205 (5.20 mm)
2
0.064 (1.63 mm)
0.060 (1.52 mm)
0.083 (2.11 mm)
0.077 (1.95 mm)
Dimensions are in inches (millimeters shown in parentheses)
S1570
Figure 12. -210 Package
Schematic
1
2
0.075 (1.91 mm)
0.065 (1.65 mm)
Sq.
Cathode
0.020 (0.51 mm) Typ.
0.033 (0.84 mm)
Min.
0.045 (1.14 mm)
0.030 (0.76 mm)
1
2
0.010 (0.25 mm)
Ref.
Dimensions are in inches (millimeters shown in parentheses)
S1564
Figure 13. -219 Package
Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  [email protected]  www.skyworksinc.com
200075Q  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  June 2, 2014
7
DATA SHEET  APD SERIES SILICON PIN DIODES, PACKAGED AND BONDABLE CHIPS
Schematic
1
-011 (240)
50°
45°
0.175 (4.44 mm)
0.125 (3.18 mm)
2 Plcs.
1
0.098 (2.49 mm)
0.092 (2.34 mm)
Cover Dia.
2
2
0.022 (0.56 mm)
0.018 (0.46 mm)
2 Plcs.
Colored Dot
Denotes Cathode
0.104 (2.64 mm)
0.092 (2.34 mm)
Sq.
0.005 (0.127 mm)
0.003 (0.076 mm)
Dimensions are in inches (millimeters shown in parentheses)
0.042 (1.06 mm)
0.028 (0.71 mm)
S1568
Figure 14. -240 Package
Copyright © 2002-2010, 2012-2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  [email protected]  www.skyworksinc.com
8
June 2, 2014  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice  200075Q