DATA SHEET SKY18120-11: 0.4-2.7 GHz SP9T Antenna Switch Module With GSM Transmit Filters Applications • Dual-mode, multi-band handsets and data cards (GSM/EDGE, Quad/UMTS or LTE dual mode) • Low-cost, ultra-small footprint embedded modules Features • Supports quad-band GSM, tri-band UMTS, LTE, or TD-SCDMA • Low insertion loss: − 1.1 dB @ 1 GHz GSM transmit − 0.8 dB @ 1 GHz GSM receive − 1.1 dB @ 2 GHz GSM receive − 0.7 dB @ 2 GHz UMTS transmit • Good 2nd/3rd harmonic performance: − –52/–52 dBm @ PIN = +35 dBm (2G low-band transmit) − –67/–60 dBm @ PIN = +32 dBm (2G high-band transmit) • State-of-the-art SOI process with GPIO logic • Ultra-small MCM (16-pin, 2.5 x 2.5 mm) package (MSL3, 260 °C per JEDEC J-STD-020) Figure 1. SKY18120-11 Block Diagram Description The SKY18120-11 is a Single Pole, Nine-Throw (SP9T) antenna switch Front-End Module (FEM) designed for dual-mode, high power band switching applications that require low harmonics and low insertion loss. The device is optimized for GSM/EDGE, TD-SCDMA, and WCDMA/LTE applications. The SKY18120-11 consists of an SP9T switch, GSM transmit signal low-pass harmonic filters, and a GPIO controller. The low current consumption makes this device very suitable for battery operated applications. The SKY18120-11 is manufactured in a compact, 2.5 x 2.5 mm, 16-pin Multi-Chip Module (MCM) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012 1 DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Figure 2. SKY18120-11 Pinout – 16-Pin MCM (Top View) Table 1. SKY18120-11 Signal Descriptions Pin # Name Description Pin # Name Description 1 VDD Supply voltage 9 ANT Antenna 2 VC4 Antenna switch control logic pin 10 GND Ground 3 VC3 Antenna switch control logic pin 11 DCS1800/PCS1900_TX RF input for DCS1800/PCS1900 transmit 4 VC2 Antenna switch control logic pin 12 GSM850/EGSM900_TX RF input for GSM850/EGSM900 transmit 5 VC1 Antenna switch control logic pin 13 RX1 RF output for GSM receive 6 UMTS1_TD1 RF input/output for UMTS transmit/receive 14 RX2 RF output for GSM receive 7 UMTS2_TD2 RF input/output for UMTS transmit/receive 15 RX3 RF output for GSM receive 8 UMTS3_TD3 RF input/output for UMTS transmit/receive 16 RX4 RF output for GSM receive Note: Bottom ground paddles must be connected to ground. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Table 2. SKY18120-11 Absolute Maximum Ratings (Note 1) Parameter Minimum Maximum Units VDD 2.65 3.30 V Control voltage VCTRL 1.55 3.30 V RF input power: GSM850/EGSM900 transmit DCS1800/PCS1900 transmit UMTS transmit All receive ports PIN +36 (Note 2) +33 (Note 2) +30 +13 dBm dBm dBm dBm Operating temperature TOP –35 +85 °C Storage temperature TSTG –60 +150 °C Supply voltage Symbol Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. Note 2: 12.5% to 50% duty cycle. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Functional Description Electrical and Mechanical Specifications The SKY18120-11 SP9T Antenna Switch Module can operate in one of nine states when the VDD signal is high. These states are controlled by the VC1 to VC4 pin signals. The absolute maximum ratings of the SKY18120-11 are provided in Table 2. Electrical specifications are provided in Table 3. The state of the SKY18120-11 is determined by the logic shown in Table 4. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012 3 DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Table 3. SKY18120-11 General Electrical Specifications (Note 1) (1 of 4) (VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition (Note 2) Min Typical Max Units Insertion Loss GSM850/EGSM900_TX pin to ANT pin IL 824 to 915 MHz (NTC) 824 to 915 MHz (ETC) 1.12 1.21 1.30 1.50 dB dB DCS1800/PCS1900_TX pin to ANT pin IL 1710 to 1910 MHz (NTC), 1710 to 1910 MHz (ETC) 1.12 1.23 1.40 1.60 dB dB ANT pin to RX1 to RX4 pins IL 869 to 960 MHz (NTC), 869 to 960 MHz (ETC) 0.79 0.88 1.20 1.40 dB dB 1805 to 1990 MHz (NTC), 1805 to 1990 MHz (ETC) 1.08 1.19 1.40 1.60 dB dB 700 to 960 MHz (NTC), 700 to 960 MHz (ETC) 0.48 0.55 1.00 1.20 dB dB 1710 to 1920 MHz (NTC), 1710 to 1920 MHz (ETC) 0.72 0.81 1.20 1.40 dB dB 2010 to 2700 MHz (NTC) 2010 to 2700 MHz (ETC) 0.80 0.90 1.30 1.50 dB dB UMTS_TD1/TD2/TD3 pins to ANT pin IL Harmonic Attenuation GSM850/EGSM900_TX pin to ANT pin, 2nd harmonics 2fo 1648 to 1698 MHz, 1760 to 1830 MHz 25 25 37 31 dB dB GSM850/EGSM900_TX pin to ANT pin, 3rd harmonics 3fo 2472 to 2547 MHz, 2640 to 2745 MHz 25 25 28 31 dB dB DCS1800/PCS1900_TX pin to ANT pin, 2nd harmonics 2fo 3420 to 3820 MHz 25 33 dB DCS1800/PCS1900_TX pin to ANT pin, 3rd harmonics 3fo 5130 to 5730 MHz 25 28 dB GSM850/EGSM900_TX pin to RX1 pin GSM850/EGSM900_TX pin to RX2 pin GSM850/EGSM900_TX pin to RX3 pin GSM850/EGSM900_TX pin to RX4 pin Iso 824 to 915 MHz 25.0 25.0 30.0 30.0 30.4 36.7 42.8 44.5 dB dB dB dB GSM850/EGSM900_TX pin to ANT pin Iso GSM receive mode, 824 to 915 MHz 20.0 26.4 dB DCS1800/PCS1900_TX pin to RX1 pin DCS1800/PCS1900_TX pin to RX2 pin DCS1800/PCS1900_TX pin to RX3 pin DCS1800/PCS1900_TX pin to RX4 pin Iso 1710 to 1910 MHz 25.0 25.0 30.0 30.0 31.8 36.4 35.9 40.2 dB dB dB dB Isolation DCS1800/PCS1900_TX pin to ANT pin GSM receive mode 20.0 24.3 dB UMTS1_TD1 pins to RX1 pin UMTS1_TD1 pins to RX2 pin UMTS1_TD1 pins to RX3 pin UMTS1_TD1 pins to RX4 pin Iso 700 to 960 MHz, UMTS1_TD1 mode 30.0 30.0 30.0 30.0 51.0 56.0 57.2 52.7 dB dB dB dB UMTS1_TD1 pins to RX1 pin UMTS1_TD1 pins to RX2 pin UMTS1_TD1 pins to RX3 pin UMTS1_TD1 pins to RX4 pin Iso 1710 to 2170 MHz, UMTS1_TD1 mode 25.0 25.0 30.0 30.0 41.7 42.2 44.5 41.1 dB dB dB dB UMTS1_TD1 pins to RX1 pin UMTS1_TD1 pins to RX2 pin UMTS1_TD1 pins to RX3 pin UMTS1_TD1 pins to RX4 pin Iso 2170 to 2700 MHz, UMTS1_TD1 mode 30 30 30 30 40 40 40 40 dB dB dB dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Table 3. SKY18120-11 General Electrical Specifications (Note 1) (2 of 4) (VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition (Note 2) Min Typical Max Units Isolation (continued) UMTS2_TD2 pins to RX1 pin UMTS2_TD2 pins to RX2 pin UMTS2_TD2 pins to RX3 pin UMTS2_TD2 pins to RX4 pin Iso 700 to 960 MHz, UMTS2_TD2 mode 30.0 30.0 30.0 30.0 51.9 56.2 58.1 55.2 dB dB dB dB UMTS2_TD2 pins to RX1 pin UMTS2_TD2 pins to RX2 pin UMTS2_TD2 pins to RX3 pin UMTS2_TD2pins to RX4 pin Iso 1710 to 2170 MHz, UMTS2_TD2 mode 25.0 25.0 30.0 30.0 41.6 43.6 46.3 44.6 dB dB dB dB UMTS2_TD2 pins to RX1 pin UMTS2_TD2 pins to RX2 pin UMTS2_TD2 pins to RX3 pin UMTS2_TD2pins to RX4 pin Iso 2170 to 2700 MHz, UMTS2_TD2 mode 30 30 30 30 40 40 40 40 dB dB dB dB UMTS3_TD3 pins to RX1 pin UMTS3_TD3 pins to RX2 pin UMTS3_TD3 pins to RX3 pin UMTS3_TD3pins to RX4 pin Iso 700 to 960 MHz, UMTS3_TD3 mode 30.0 30.0 30.0 30.0 54.2 56.6 58.0 56.8 dB dB dB dB UMTS3_TD3 pins to RX1 pin UMTS3_TD3 pins to RX2 pin UMTS3_TD3 pins to RX3 pin UMTS3_TD3pins to RX4 pin Iso 1710 to 2170 MHz, UMTS3_TD3 mode 25.0 25.0 30.0 30.0 41.4 43.9 47.3 46.4 dB dB dB dB UMTS3_TD3 pins to RX1 pin UMTS3_TD3 pins to RX2 pin UMTS3_TD3 pins to RX3 pin UMTS3_TD3pins to RX4 pin Iso 2170 to 2700 MHz, UMTS3_TD3 mode 30 30 30 30 37 37 37 37 dB dB dB dB UMTS1_TD1 pin to UMTS2_TD2 pin UMTS1_TD1 pin to UMTS3_TD3 pin Iso 700 to 960 MHz, UMTS1_TD1 mode 25.0 25.0 31.1 40.2 dB dB UMTS1_TD1 pin to UMTS2_TD2 pin UMTS1_TD1 pin to UMTS3_TD3 pin Iso 1710 to 2170 MHz, UMTS1_TD1 mode 15.0 15.0 22.3 28.6 dB dB UMTS1_TD1 pin to UMTS2_TD2 pin UMTS1_TD1 pin to UMTS3_TD3 pin Iso 2170 to 2700 MHz, UMTS1_TD1 mode 15 15 19 24 dB dB UMTS2_TD2 pin to UMTS1_TD1 pin UMTS2_TD2 pin to UMTS3_TD3 pin Iso 700 to 960 MHz, UMTS2_TD2 mode 25.0 25.0 31.8 36.0 dB dB UMTS2_TD2 pin to UMTS1_TD1 pin UMTS2_TD2 pin to UMTS3_TD3 pin Iso 1710 to 2170 MHz, UMTS2_TD2 mode 15.0 15.0 23.9 24.1 dB dB UMTS2_TD2 pin to UMTS1_TD1 pin UMTS2_TD2 pin to UMTS3_TD3 pin Iso 2170 to 2700 MHz, UMTS2_TD2 mode 15 15 20 19 dB dB UMTS3_TD3 pin to UMTS1_TD1 pin UMTS3_TD3 pin to UMTS2_TD2 pin Iso 700 to 960 MHz, UMTS3_TD3 mode 25.0 25.0 38.5 31.9 dB dB UMTS3_TD3 pin to UMTS1_TD1 pin UMTS3_TD3 pin to UMTS2_TD2 pin Iso 1710 to 2170 MHz, UMTS3_TD3 mode 15.0 15.0 29.9 23.6 dB dB UMTS3_TD3 pin to UMTS1_TD1 pin UMTS3_TD3 pin to UMTS2_TD2 pin Iso 2170 to 2700 MHz, UMTS3_TD3 mode 15 15 26 20 dB dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012 5 DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Table 3. SKY18120-11 General Electrical Specifications (Note 1) (3 of 4) (VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted Parameter Symbol Test Condition (Note 2) Min Typical Max Units Voltage Standing Wave Ratio (VSWR) Input VSWR @ GSM850/EGSM900_TX pin VSWR 824 to 915 MHz, GSM850/EGSM900_TX mode 1.2:1 1.6:1 – Output VSWR @ ANT pin VSWR 824 to 915 MHz, GSM850/EGSM900_TX mode 1.4:1 1.6:1 – Input VSWR @ DCS1800/PCS1900_TX pin VSWR 1710 to 1910 MHz, DCS1800/PCS1900_TX mode 1.2:1 1.7:1 – Output VSWR @ ANT pin VSWR 1710 to 1910 MHz, DCS1800/PCS1900_TX mode 1.4:1 1.7:1 – Input VSWR @ ANT pin VSWR GSM receive mode: 1.3:1 1.3:1 1.7:1 1.7:1 – – 1.3:1 1.3:1 1.7:1 1.7:1 – – 1.2:1 1.2:1 1.6:1 1.6:1 – – 1.2:1 1.2:1 1.6:1 1.6:1 – – 869 to 960 MHz 1805 to 1990 MHz Output VSWR @ RX1/2/3/4 pins VSWR GSM receive mode: 869 to 960 MHz 1805 to 1990 MHz Input VSWR @ ANT pin VSWR UMTS/TD mode: 824 to 960 MHz 1710 to 2170 MHz Output VSWR @ UMTS1/2/3_TD1/2/3 pins VSWR UMTS/TD mode: 824 to 960 MHz 1710 to 2170 MHz Operating Modes and Current Consumption GSM850/EGSM900 transmit ICC 25 50 μA DCS1800/PCS1900 transmit ICC 25 50 μA TD-SCDMA transmit ICC 25 50 μA GSM receive ICC 25 50 μA TD-SCDMA receive ICC 25 50 μA Control current ICTRL 1.5 20.0 μA 2.5 5.0 μs Switching Time Rise/fall 50% VCTRL to 90% RF Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Table 3. SKY18120-11 General Electrical Specifications (Note 1) (4 of 4) (VDD = 2.8 V, TOP = +25 °C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted Parameter Symbol Test Condition (Note 2) Min Typical Max Units 1648 to 1830 MHz, PIN = +35 dBm –52 –35 dBm 2472 to 2745 MHz, PIN = +35 dBm –52 –35 dBm 3420 to 3820 MHz, PIN = +32 dBm –67 –35 dBm 5130 to 5730 MHz PIN = +32 dBm –60 –35 dBm 1648 to 1698 MHz, PIN = +26 dBm –62 –34 dBm 2472 to 2547 MHz, PIN = +26 dBm –60 –34 dBm 3700 to 3960 MHz, PIN = +26 dBm –62 –34 dBm 5550 to 5940 MHz, PIN = +26 dBm –60 –34 dBm Harmonic Power GSM850/EGSM900_TX pin to ANT pin DCS1800/PCS1900_TX pin to ANT pin UMTSx_TDx pins to ANT pin Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: NTC = Normal test conditions (TA = 25 °C, VDD = 2.8 V). ETC = Extreme test conditions (TA = –35 °C to +85 °C, VDD = 2.65 to 3.30 V). Table 4. SKY18120-11 Control Logic Pin/Mode VC1 (Pin 5) VC2 (Pin 4) VC3 (Pin 3) VC4 (Pin 2) GSM850/EGSM900_TX High Low Low High DCS1800/PCS1900_TX High Low Low Low RX1 Low High Low High RX2 Low High Low Low RX3 Low Low Low High RX4 Low Low Low Low UMTS1_TD1 Low Low High Low UMTS2_TD2 Low Low High High UMTS3_TD3 Low High High Low Note 1: “High” = 1.8 V; “Low” = 0 V. Any state other than that described in this Table places the switch into an undefined state. An undefined state will not damage the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012 7 DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Evaluation Board Description Package and Handling Information The SKY18120-11 Evaluation Board is used to test the performance of the SKY18120-11 SP9T Antenna Switch Module. An Evaluation Board schematic diagram is provided in Figure 3. Table 5 provides the Bill of Materials (BOM) list for Evaluation Board components. An assembly drawing for the Evaluation Board is shown in Figure 4. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The PCB layout footprint for the SKY18120-11 is provided in Figure 5. Typical case markings are shown in Figure 6. Package dimensions for the 16-pin MCM are shown in Figure 7, and tape and reel dimensions are provided in Figure 8. THE SKY18120-11 is rated to Moisture Sensitivity Level 1 (MSL1) at 260 °C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, PCB Design & SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Figure 3. SKY18120-11 Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Table 5. SKY18120-11 Evaluation Board Bill of Materials Component Value Size C1 100 nF 0201 C2 10 pF 0201 L1 18 nH 0201 R1 1.3 kΩ 0201 R2 1.3 kΩ 0201 R3 1.3 kΩ 0201 R4 1.3 kΩ 0201 Figure 4. SKY18120-11 Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012 9 DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Figure 5. SKY18120-11 PCB Layout Footprint (Top View) Figure 6. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Figure 7. SKY18120-11 16-Pin MCM Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012 11 DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Figure 8. SKY18120-11 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 February 20, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201329F DATA SHEET • SKY18120-11 SP9T ANTENNA SWITCH MODULE Ordering Information Model Name SKY18120-11 0.7-2.7 GHz SP9T Antenna Switch Module With GSM Transmit Filters Manufacturing Part Number SKY18120-11 Evaluation Board Part Number EN31-D858-003 Copyright © 2010, 2011, 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201329F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 20, 2012 13