EBSA201 ~ EBSA207 Voltage 50V ~ 1000V 2.0 Amp Silicon Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES EBSA Ideal for printed circuit board Lead tin plated copper Reliable low cost construction utilizing molded plastic technique results in inexpensive product MECHANICAL DATA Polarity: Cathode Band Mounting position :Any PACKAGE INFORMATION Package MPQ Leader Size EBSA 5K 13 inch REF. A B C D Millimeter Min. Max. 4.9 5.1 6.0 6.4 3.9 4.1 3.35(TYP.) REF. E F G H Millimeter Min. Max. 0.6 0.7 4.3 4.5 1.45 1.55 0.15 0.25 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol EBSA 201 EBSA 202 EBSA 203 EBSA 204 EBSA 205 EBSA 206 EBSA 207 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Output Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 2A Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance Typical Thermal Resistance 2 A IFSM 50 A VF 1.05 V TA=25°C TA=100°C 2 1 Operating and Storage temperature range Note: 1. 2. IF IR 5 µA 500 CJ 15 pF RθJC 30 °C / W TJ,TSTG -55~150 °C Thermal resistance junction to case Measured at 1.0MHZ and applied reverse voltage of 4.0V DC http://www.SeCoSGmbH.com/ 13-Nov-2014 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 EBSA201 ~ EBSA207 Elektronische Bauelemente Voltage 50V ~ 1000V 2.0 Amp Silicon Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 13-Nov-2014 Rev. A Any changes of specification will not be informed individually. Page 2 of 2