SR2150 Voltage 150 V 2.0 Amp Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DO-15 FEATURES Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction C A B MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 0.093 grams (Approximately) D A REF. A B C D Millimeter Min. Max. 25.4 (TYP) 5.80 7.62 2.60 3.60 0.90 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%. TYPE NUMBER VALUES UNITS Maximum Recurrent Peak Reverse Voltage 150 V Working Peak Reverse Voltage 150 V Maximum DC Blocking Voltage 150 V 2 A 50 A Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave Superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage IF = 2 Amps, TA = 25°C 0.85 IF = 2 Amps, TA = 125°C 0.78 Maximum DC Reverse Current at Rated DC Blocking Voltage (Note 3) V TA = 25°C 0.2 TA = 125°C 2 mA Typical Junction Capacitance (Note 1) 50 pF Typical Thermal Resistance RJL (Note 2) 10 °C /W 10000 V/us Operating Temperature Range TJ -50 ~ +150 °C Storage Temperature Range TSTG -65 ~ +175 °C Voltage Rate of Chance (Rated VR) NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Lead. 3. Pulse test: 300us pulse width, 1% duty cycle. http://www.SeCoSGmbH.com/ 06-Aug-2014 Rev. B Any changes of specification will not be informed individually. Page 1 of 2 SR2150 Elektronische Bauelemente Voltage 150 V 2.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 06-Aug-2014 Rev. B Any changes of specification will not be informed individually. Page 2 of 2