SSCD102L / SSCD104L

SSCD102L / SSCD104L
Voltage 20 V ~ 40 V
1.0 A Surface Mount Schottky Barrier Rectifiers
Elektronische Bauelemente
RoHS Compliant Product
A suffix of “-C” specifies halogen & lead-free
FEATURES





1206
Lead less chip form, no lead damage
Lead-free solder joint, no wire bond & lead frame
Low power loss, High efficiency
High current capability, low VF
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
B
C
A
G
F
APPLICATION




Switching mode power supply applications
Portable equipment battery applications
General rectification
DC / DC converter
Cathode Band
E
D
MECHANICAL DATA




E
Case: Packed with FRP substrate and epoxy underfilled
Terminals: Pure tin-plated (lead-free), solderable per
MIL-STD-750, method 2026.
Polarity: Laser cathode band marking
Weight : 0.012 gram
REF.
A
B
C
D
Millimeter
Min.
Max.
3.20
3.60
1.70
2.10
1.60 TYP.
0.86
1.16
REF.
E
F
G
Millimeter
Min.
Max.
0.50
0.90
R 0.40
0.05 REF.
MARKING
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified)
Parameters
Symbol
Part Number
SSCD102L
SSCD104L
20
40
Unit
Repetitive Peak reverse voltage
VRRM
Maximum Average Forward Current
IF(AV)
1
A
Peak Forward Current @ 8.3 ms half sine-wave
IFSM
25
A
VF
0.38
V
IRRM
1
mA
pF
Forward voltage 1@ IF=1A
Repetitive peak reverse current 1@ VR=Max. VRRM, TA=25°C
Typical Junction capacitance@ VR=4V, f =1.0MHz
V
CJ
115
Typical Thermal Resistance – Junction to Ambient 2
RJA
88
Typical Thermal Resistance – Junction to Lead 2
RJL
28
TJ
-55 ~ 125
°C
TSTG
-55 ~ 150
°C
Operating Temperature Range
Storage temperature
°C / W
NOTES:
1. Pulse test width PW=300usec , 1% duty cycle
2. Mounted on P.C. board with 0.2 x 0.2"(5.0 x5.0mm) copper pad areas.
http://www.SeCoSGmbH.com/
17-Feb-2014 Rev. B
Any changes of specification will not be informed individually.
Page 1 of 2
SSCD102L / SSCD104L
Elektronische Bauelemente
Voltage 20 V ~ 40 V
1.0 A Surface Mount Schottky Barrier Rectifiers
RATINGS AND CHARACTERISTIC CURVES
http://www.SeCoSGmbH.com/
17-Feb-2014 Rev. B
Any changes of specification will not be informed individually.
Page 2 of 2