SEF201A ~ SEF207A Voltage 50 ~ 1000 V 2AMP High Efficiency Recovery Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free SMA FEATURES Low profile package Ideal for automated placement Low reverse current Fast reverse recovery time Component in accordance to RoHS 2002/95/EC B A C H MECHANICAL DATA Case: DO-214AC (SMA) Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Terminals: Lead Free Plating (Tin Finish) Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 0.201 grams (approximately) D G E F Millimeter Min. Max. 1.24 1.65 3.99 4.60 2.40 2.90 1.90 2.44 REF. A B C D REF. E F G H Millimeter Min. Max. 0.203 4.80 5.28 0.76 1.52 0.15 0.305 PACKAGE INFORMATION Package MPQ Leader Size SMA 5K 13 inch MAXIMUM RATINGS(TA=25°C unless otherwise specified) Part Number Parameter Symbol SEF SEF SEF SEF SEF SEF SEF 201A 202A 203A 204A 205A 206A 207A Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25°C TA=100°C Maximum Reverse Recovery Time 2 Typical Junction Capacitance 1 Typical Thermal Resistance Operating & Storage Temperature Note: IF 2.0 A IFSM 50.0 A VF 1.0 1.3 1.7 5.0 IR V μA 100 TRR 50 75 nS CJ 30 20 pF RθJA 38 °C/W TJ,TSTG -55~150, -55~150 °C 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2. Measured with IF =0.5A, IR =1A, IRR=0.25A http://www.SeCoSGmbH.com/ 09-Aug-2013 Rev. D Any changes of specification will not be informed individually. Page 1 of 2 SEF201A ~ SEF207A Elektronische Bauelemente Voltage 50 ~ 1000 V 2AMP High Efficiency Recovery Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 09-Aug-2013 Rev. D Any changes of specification will not be informed individually. Page 2 of 2