Ceramic Discriminator JT_M Series Ceramic Discriminator JT_M series ceramic discriminators are widely used in telecommunication, cable, radar, TV set, tape recorder, video camera and other electronic products due to its lower price and stable performances. JT_M Specifications: JT_M Series Frequency Range(fc): JT_MD Series: 4.5 ~ 6.5MHz JT_MC Series: 4.5 ~ 6.5MHz JT_MG/MC Series 10.7MHz Operating Temperature: -20°C ~ +80°C Storage Temperature: -40°C ~ +85°C Standard Recovered Audio Output Voltage: 35 ~ 140mV min Recovered Audio 3dB Bandwidth: Distortion Faction: Detection Mode: Applied ICs: JT4.5MD: ± 40KHz JT5.5~6.5MD: ± 50KHz JT4.5MC: ± 50KHz JT5.5~6.5MC: ± 60KHz JT10.7MG: 300KHz JT10.7MC: 242KHz JT_MD: 3.0% max JT_MC: 1.5% max JT10.7M: 1.0% max JT_MD: Differential Peak JT_MC: Quadrature JT_MG: Quadrature All dimensions are in mm JT_MD: TA7176, AN241,µPC1353C, LA1356, CA3065 JT_MC: µPC1382C, LA7520, µPC1391H, TA7146P, TBA120T, M51316P Ordering Information Note: 1. Other frequencies, bandwidth ranges available. Consult VTC Support for specific requirements. Product name + Frequency + Bandwidth Code. 2. Not all combinations of the above bandwidth ranges are available. Consult VTC Support if your requirement is not standard. i.e. JT4.5MC 3. All specifications subject to change without notice. Phone: +86 10 6301 4184 August 15, 2002 Fax: +86 10 6301 9167 Email: [email protected] Web: http://www.vanlong.com Vanlong Technology Co., Ltd.