RK16 Legacy Product Datasheet [email protected] www.sixnet.com 16 Port Industrial Ethernet Managed Switch Ultra-Reliability and Super Flexibility in a Half Width Rack The SIXNET RK16 is a truly industrial Ethernet switch offering up to 16 total ports including gigabit and fiber optic options. The rugged 1U 19” half-rack packaging is ideal for heavy duty Front Carrier Class and industrial applications that require high density in order to save cost and space. The RK16 has two flexible configuration slots. These slots accept a wide range of modules that include 10/100 RJ45 ports; 10, 100 or 1000 Mbps fiber optic ports; or 10/100/1000 Mbps gigabit RJ45 ports and POE. The fiber optic ports are available in several types for distances up to 120+ km. The RK16 is also loaded with the most advanced hardware and software capabilities for network management, Back network optimization and most of all network security. Real-time Secure Performance Rugged and Flexible Hardware Non-blocking wire-speed performance on all ports Up to 16 ports total including fiber, gigabit and POE Rapid Spanning Tree (RSTP) for fast redundant rings Space efficient 1U 19” half-rack metal enclosure SNMPv1 and v2 network management Front mounted ports for easy access SNMPv3 authentication & encryption for security Dual (redundant) power inputs – optional SNMP notifications (traps) for report on event Two alarm output contacts – optional Priority Queuing (QoS/CoS) for real-time operation -20 to +70 °C operating temperature range IGMP for Multicast filtering (snooping & querying) UL, CUL (CSA), CE and FCC rated for safety & EMC VLAN for convenient traffic segregation NEBS Layer3 & ETSI compliant for mission critical apps Broadcast & multicast storm protection NEMA-TS2 compliant for traffic control systems RMON & port mirroring for advanced diagnostics IEEE 1613 & IEC61850 rated for power substations Security with HTTPS, SNMPv3, Radius/802.1x & more Two RK16 switches mounted side by side in a 19” rack-mount tray. Performance Specifications General Ethernet switch type Ethernet protocols supported MAC addresses supported System forward & filter rate 10/100 RJ45 copper ports Speed (10/100BaseTX) Full or half duplex Up to 16 Ethernet ports Managed, store & forward All IEEE 802.3 4096 6.0 Mpps Up to 16 Auto-negotiation (10 or 100 Mbps) Auto-negotiation or Configurable Typ. latency for 10 Mbps 16 us + frame time Typ. latency for 100 Mbps 5 us + frame time 10 Mbps or 100 Mbps fiber optic ports Fiber mode options Connector options Gigabit copper or fiber ports Fixed gigabit copper ports Gigabit fiber optic ports Alarm Outputs (optional) Type Operation Power Options Input voltage options Input power Dual power input Ethernet isolation Environmental Operating temperature range Storage temperature range Humidity (non-condensing) Conformal coating Vibration, shock, etc. Altitude Electrical safety EMI/EMC emissions & immunity Power substation ratings Traffic control systems Network equip. building sys. European Telecommunications Standards Institute Mechanical Packaging (steel) Dimensions (L x W x H) Weight Varies on load & settings Up to 8 100 Mbps per module or 4 10 Mbps per module Multi or singlemode up to 40 km ST, SC, LC and MTRJ Up to 4 gigabit ports per switch 10/100/1000 auto-negotiation Fixed or pluggable GBIC SC transceiver with distances up to 120 km 1 each for power & software status Form C NC (normally closed) 1U 19” half-rack 100-240 VAC, 47-63 Hz. or 18-36 VDC (24 VDC nominal) or -36 to -70 VDC (-48 VDC nom.) or 88 to 150VDC (110/125VDC nom.) 40 W typical with two fiber modules Optional for DC inputs only 1500 VRMS 1 minute Truly industrial rated -20 to +70 °C (-40 to +85 °C for short periods per IEC 60068) -40 to +85 °C 5 to 95% RH Optional – contact SIXNET NEBS (GR-63-CORE) -200 to 13000 ft. (-60 to 4000 m) UL60950, CUL (CSA), CE FCC part 15, ICES-003, CE, NEBS (GR-1089-CORE) IEEE 1613 and IEC 61850 NEMA TS2 rated NEBS Level 3 (GR-63 & GE-1089) ETSI compliant 1U 19” half-rack (brackets included) (side-by-side tray, 23” and ETSI optional) IP30 protection 1.8x8.8x10” (4.4x22.2x25.4 cm) 4.0 lbs (1.8 kg) Hardware Highlights: 16 port industrial Ethernet managed switch with two module slots for gigabit, fiber optic, RJ45 ports or POE 1U 19” half-rack with optional tray, 23” or ETSI mounting Optional outputs for reporting power and software status Optional dual power inputs for redundancy Industrial rated for -20 to +70 °C operation UL, CUL (CSA), FCC, CE, NEBS L3 and ETSI rated NEMA TS2, IEEE 1613 and IEC61850 rated Networking Features: Non-blocking, full wire speed performance on all ports Auto-detecting and auto-crossover RJ45 ports Store and forward wire speed switching Support for up to 4096 MAC addresses Full-Duplex operation with flow control (no collisions!) Rapid Spanning Tree (RSTP) for fault-tolerant loops Priority queuing for real-time performance SNMP v1 and V2 for network management SNMP v3 for authentication and encryption SNMP notifications (traps) for report on event IGMP v1 & v2 for IP multicast filtering VLAN (port & tag based) for traffic segregation Message filtering to stop broadcast/multicast storms RMON and port mirroring for diagnostics Configuration via secure (https) Web interface, Telnet / (network), terminal (RS232), CLI or SNMP (v1, v2, v3) Ethernet Compliance: IEEE 802.3 (10 Mbps Ethernet supports legacy devices) IEEE 802.3u (Fast Ethernet 100 Mbps for newer devices) IEEE 802.3z/ab (Gigabit 1000 Mbps Ethernet) IEEE 802.3x (Full-Duplex with Flow Control) IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability) IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS) IEEE 802.1Q (VLAN for traffic segregation) Additional features are in the works and are provided through FREE Firmware Upgrades. Contact SIXNET for the latest information. Related Products: RK32 SIXNET also offers 25 and 32 port rack mount switches with all the same great features of the RK16. RK25 Specifications are subject to change. Consult factory for latest information. 331 Ushers Road y Ballston Lake, NY 12065 USA y +1 (518) 877-5173 Fax +1 (518) 877-8346 y [email protected] y www.sixnet.com Step 1: Choose base unit. Power Input 100 to 240 VAC 18 to 36 VDC -36 to -70 VDC 88 to 150 VDC Front Mount Fan Cooled RK16 RK16-24VDC RK16-48VDC RK16-125VDC Step 2: Choose modules for slot A and/or B. 10/100 10BaseFL 100BaseFX 100BaseFX Gigabit POE RJ45 mm - 2 km mm - 2 km singlemode Ports RKP8-RJ45 8 RKP8-45-2MT 6 2 MTRJ RKP8-45-2SLC 6 2 LC 15km RKP6-RJ10ST 4 2 ST RKP6-RJMST 4 2 ST RKP6-RJMSC 4 2 SC RKP6-RJSSC 4 2 SC 20km RKP6-RJSSCL 4 2 SC 40km RKP8-45MT 4 4 MTRJ RKP8-45MLC 4 4 LC RKP8-45SLC 4 4 LC 15km RKP4-F10ST 4 ST RKP4-FLSTFX 2 ST 2 ST RKP4-FXST 4 ST RKP4-FXSC 4 SC RKP6-MT10ST 2 ST 4 MTRJ RKP8-MTRJ 8 MTRJ RKP8-MLC 8 LC RKP8-SLC 8 LC 15km RKP5-G4RJ 4 1 GBIC RKP3-G2SC 2 SC 1 GBIC GBPM-COTX 1 GBIC GBPM-2OTX 2 GBIC RKP2-2GSX 2 SC RKP2-2GCU 2 RJ45 RKP5-1CU4MT 4 MTRJ 1 RJ45 RKP3-1CU2FXT 2 ST 1 RJ45 RKP5-1CU4RJ 4 1 RJ45 PRKP8-RJ45 8 8 PRKP8-45-2MT 6 2 MTRJ 4 PRKP8-45-2SLC 6 2 LC 15km 4 PRKP6-RJ10ST 4 2 ST 4 PRKP6-RJMST 4 2 ST 4 PRKP6-RJMSC 4 2 SC 4 PRKP6-RJSSC 4 2 SC 20km 4 PRKP6-RJSSCL 4 2 SC 40km 4 PRKP8-45RJ 8 4 PRKP8-45MT 4 4 MTRJ 4 PRKP8-45MLC 4 4 LC 4 PRKP8-45SLC 4 4 LC 15km 4 PIRKP8-45-2MT 6 2 MTRJ 4 PIRKP8-45-2SLC 6 2 LC 15km 4 PIRKP6-RJ10ST 4 2 ST 4 PIRKP6-RJMST 4 2 ST 4 PIRKP6-RJMSC 4 2 SC 4 PIRKP6-RJSSC 4 2 SC 20km 4 PIRKP6-RJSSCL 4 2 SC 40km 4 PIRKP8-45RJ 8 4 PIRKP8-45MT 4 4 MTRJ 4 PIRKP8-45MLC 4 4 LC 4 PIRKP8-45SLC 4 4 LC 15km 4 RKM-BLNK Blank cover - select this for any unused slot POE for AC Switches POE for -48V Switches Gigabit Modules 10/100 Modules Part Number Ordering Guide The RK16 has two flexible slots that can accept any of the modules listed below or can be left empty. First choose your base unit, then pick your modules and GBIC transceivers (if needed), and finally pick any desired options or accessories. Step 3: Choose GBIC Transceivers for Gigabit ports with GBIC option. Part Number GBIC-TP GBIC-SXSC GBIC-LXSC10 GBIC-LXSC25 GBIC-ZXSC40 GBIC- ZXSC70 GBIC- ZXSC120 Description 1000BaseT RJ45 mm, 850 nm, SC, 550 m sm, 1310 nm, SC, 10 km sm, 1310 nm, SC, 25 km sm, 1550 nm, SC, 40 km sm, 1550 nm, SC, 70 km sm, 1550 nm, SC, 120 km Step 4: Choose options & accessories Part Number DUAL-SRC ALARM TERMBLK RKM-BLNK K16-2TRAY K16-RMB CONSOLE CBL CONSOLE USB CONFORMAL CR Description Dual power inputs (DC only) Two alarm outputs Blank cover for unused slots 19” tray holds 2 RK16s Convert above to ETSI or 23” Cable, PC to console port Cable, PC to console port Conformal coating Note: Only one POE module is allowed per RK switch. If the base switch is AC or 125 VDC powered then you must use these POE modules plus choose one of the following internal (mounts inside switch) power supplies. RKAC-POE-PS AC to -48 VDC power for 4 POE ports, 60 watts RK125VDC-POE-PS 125 VDC to -48 VDC power for 4 POE ports, 60 watts 331 Ushers Road y Ballston Lake, NY 12065 USA y +1 (518) 877-5173 Fax +1 (518) 877-8346 y [email protected] y www.sixnet.com