PRODUCT DATASHEET BT-5800v2 GSM HSPA Mobile GPS Modem The BT-5800v2 is a rugged 3G modem that offers internet connectivity over the cellular network to invehicle applications. Whether to issue violations, look up license plates, report status of accidents, transmit patient data, or enhance dispatch, the BT-5800v2 provides mobile workers a continuous real-time link for their bandwidth demanding and mission critical mobile data applications. PRODUCT HIGHLIGHTS n Always-on high-speed wireless connectivity n Latest 3G technology - GSM HSDPA and HSUPA with 7.2 Mbps peaks n Multiple interfaces: Ethernet, USB and Serial n Rugged design per MIL-STD-810F n High sensitivity GPS with augmentation system n TAIP and NMEA GPS protocols n General n event reporting engine Performance: enhanced sensitivity GPS receiver with augmentation system, providing a fast time to first fix and accuracy within 2 meters. nMultiple device management BENEFITS n Provides ubiquitous cellular coverage with no maintenance fees n Improves emergency response time n Mobile transmission of patient data n Increases worker’s safety by optimizing communication with dispatch center n Improves incident management and route planning n Provides broadband connectivity to multiple devices in the vehicle MOBILE DATA APPLICATIONS management Field Force Automation GPS FEATURES Embedded GPS makes this wireless modem ideal for deployment in Public Safety and First Responders applications as well as in Automatic Vehicle Location (AVL), Intelligent Transportation Systems (ITS) and field service automation applications. Used to track the geographic location of vehicles, assets are better managed and safety of personnel is increased. purpose Inputs and Outputs n Advanced n Remote n n Mobile resource computing) (Mobile n Public Safety (Police, Fire, Ambulance & EMS) n Transit destinations: ability to send GPS positions over the wireless network to multiple server destinations, and to a local mobile computer at the same time. n Multiple protocols: support of industry standard TAIP and NMEA, along with BlueTree’s BEP (BlueTree Event Protocol). n Standalone mode: leverages the embedded intelligence and programming capabilities of the modem to collect, store and forward GPS position data, without the need to attach a computing device. n Store and Forward: managing the reporting of GPS data when in and out of wireless coverage to ensure customers have accurate tracking solutions for your industrial networking challenges www.sixnet.com GSM HSPA Mobile GPS Modem specifications Unique Cellular Coverage The modem incorporates a second cellular antenna connection for diversity. When used in conjunction with the main antenna, receiver sensitivity is improved resulting in increased connectivity, coverage and reliability. General Purpose Inputs and Outputs Featuring 10 GPIOs and 1 dedicated Ignition Sense for vehicle telemetry: n 3 digital outputs that can be turned ON or OFF on command, or automatically when an event is triggered – allowing for remote control of sirens, door locks, and other. n 4 digital inputs allow monitoring of vehicle sensors such as doors, parking brake, or panic buttons. n 3 analog inputs can be employed to measure a variety of special purpose gradient sensors such as temperature of a refrigerated vehicle or level of a battery. n Vehicle Ignition ON/OFF notification n Low voltage alert Event Reporting Engine By monitoring signals such as position/velocity, IOs and cellular state, the modem can report a variety of events to a server application: n Time-based tracking and or distance-based real-time BT-5800v2 MODEM PERFORMANCE n 1xRJ45 Ethernet 10/100 Mbps auto-sensing n 1x RS-232 Serial DB9 at rates up to 115,200bps n 1x USB2.0 TypeB device port at rates up to 12 Mbps n Power voltage 8 - 30 VDC (12 and 24 nominal) LED INDICATORS n 7x LEDs: Power, WAN, Signal, RS232 n GPS, Ethernet Link & Activity INPUTS & OUTPUTS n 1x Reset Button n 3x Digital Outputs n 4x Digital Inputs n 3x Analog Inputs n 1x Ignition Sense GPS PERFORMANCE n Accuracy: <2 meters (50%), <4 meters (90%) n Acquisition: Hot Start = 3 s, Warm Start = 35 s, Cold Start = 38 s n Sensitivity: Tracking = -160 dBm, Acquisition = -146 dBm n Augmentation System: SBAS (WAAS, EGNOS) ENVIRONMENTAL n Operating Temp: -40 to +85 Celsius n Humidity: 95% non-condensing Shock: MIL-STD-810F n Excessive speed & engine idling n n Report at different intervals depending on speed or input trigger n Vibration: MIL-STD_810F n Automotive: SAE J1455 n Alumi. 166 x 107 x 56 mm (6.5” x 4.2” x 2.2”), 498g (1.1 lb) n Trip odometer n IO state change or threshold reached Remote Device Management By offering remote over the air diagnostics, configuration & firmware upgrades, on-site visits to troubleshoot or perform changes are virtually eliminated – and the health of the fleet of deployed modems is more efficiently managed. Multiple Interfaces: Serial, USB and Ethernet Support of the three most commonly used data interfaces guarantees drop-in interoperability with any application equipment, current and future. Even more, all interfaces can be used simultaneously for over the air access to different vehicle terminals. All specifications are subject to change. Consult factory for latest info. ORDERING GUIDE BT-5800v2 GSM HSPA Mobile GPS Modem Note: This Modem has AT&T, Kore and Rogers approvals Software Tools The BlueTree 5800v2 can easily be configured, monitored and managed using the following BlueVue software applications. BlueVue Device Manager For initial setup and configuration 331 Ushers Road • Ballston Lake, NY 12019 • USA +1 518 877 5173 • Fax +1 518 877 8346 • [email protected] solutions for your industrial networking challenges Datasheet BT-5800 Rev Feb 8, 2010 www.sixnet.com