RUGGED IP67 ETHERNET SWITCH

PRODUCT DATASHEET
ET-8xS-MIL-1
RUGGED IP67 ETHERNET SWITCH
The ET-8xS-MIL-1 is an ultra-reliable fast Ethernet
(10/100) switch with military-style D38999 connectors.
It is an ideal Commercial off the Shelf (COTS) solution
for battlefield communication, combat vehicles, avionics
shipboard or any industrial applications requiring the
toughest switch.
Model Numbers:
ET-8ES-MIL-1 (unmanaged)
ET-8MS-MIL-1 (managed)
PRODUCT HIGHLIGHTS
n 8 fast Ethernet ports for 10/100 Mbps links
n
IP67 / NEMA 6 rated package totally protects against
dust, water, oil, debris and more
n
High performance switch rated for MIL-STD-810F,
MIL-STD-461E and MIL-STD-1275B
n
Military-rated MIL-DTL-38999 Series III connectors
protect against vibration, shock, water and more
n
Tough corrosion-proof aluminum enclosure
n
Truly industrial -40 to +75°C operating range with
conductive cooling (no moving parts)
REAL-TIME ETHERNET PERFORMANCE
n Unmanaged or fully managed models available
n
Fast wire-speed switching with automatic intelligent
routing for no collisions and no delays!
n
Each port supports auto-speed/duplex, auto-crossover
and auto-polarity
RUGGED & COMPACT MILITARY-STYLE
CONNECTORS
These switches feature MIL-STD-38999 Series III connectors
that are suitable for industrial, military and severe environment
applications.
n Managed
models support advanced features such
as RSTP, SNMP, QoS/CoS, IGMP, VLAN, security
and much more
n
22D Contacts – Tested and proven for high speed
signals such as 100Mbps Ethernet
n
EMI Shielding & ESD Resistance – Solid metal to
metal coupling provides superior EMI shielding and
ESD protection
n
Contact Protection – Recessed pins in this 100%
scoop-proof connector minimize contact damage
n
Moisture Corrosion Resistance – Shells are plated
to withstand a 500 hour salt spray exposure
n
Resistance – Improved interfacial seal helps prevent
electrolytic erosion of contacts
n
Vibration/Shock – Operates under severe high
temperature with vibration, through 200°C
n
Lockwiring Eliminated – Unique, self-locking, quick
coupling connector eliminates lockwiring
n
Quick Coupling – Completely mates and self-locks in
a 60° turn of the coupling nut
n
Compact Size – Ultra compact size to fit into the tighest
applications
FLEXIBLE MOUNTING OPTIONS
n
Direct-mounting saves money eliminating the need for
additional enclosures, wiring and fittings
n
IP67 (NEMA6) water-tight case enables mounting into
a vehicle or an exposed wall in harsh applications
n
Flat or on-edge mounting so connectors are
conveniently on the side allowing for a more direct
(less bends) and protected routing of your cables
TROUBLE FREE OPERATION
n Direct 10-30 VDC power input with MIL-STD-275B
military-class spike and surge protection
n
Over 1,000,000 hours (MTBF) of trouble free service
(estimation based on actual return and repair data)
n
Hazardous locations rated for Class I, Div. 2 (Zone 2) areas
331 Ushers Road • Ballston Lake, NY 12019 • USA • +1 518 877 5178 • [email protected]
www.sixnet.com
ET-8xS-MIL-1
RUGGED IP67 ETHERNET SWITCH SPECIFICATIONS
GENERAL
n
n
n
n
n
n
n
n
n
n
n
n
8 fast Ethernet ports for 10/100Mbps links
Store & forward wire-speed non-blocking switching
Managed or unmanaged model available
All IEEE802.3 Ethernet protocols supported
Auto-negotiation for Ethernet speed and duplex
Auto-crossover for Ethernet MDI/MDIX wiring
Auto-polarity for Ethernet TD and RD polarity
Full or half duplex operation (auto or configurable)
2048 MAC addresses supported
3.2 Gbps Memory bandwidth
Ethernet isolation 1500 VRMS 1 minute
Connector: MIL-STD-38999 series III receptacle with shell
size A, style 35, 6 socket contacts & N keying
ETHERNET COMPLIANCE
n
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
n IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
n IEEE 802.3x (Full-Duplex with Flow Control)
POWER INPUT
n
Connector:
MIL-STD-38999 Series III receptacle with
shell size A, style 98, 3 pin contacts and A keying
n
Input voltage range: 10-30 VDC (continuous)
n
Input power: 4 W (typical under full load)
n
Reverse polarity protection
n
Exceeds MIL-STD-1275 for power protection
n
Surge protection: 100 volts for 1 second
nTransient protection: 15,000 watts peak
n
Spike protection: 5,000 watts (10x for 10 uS) or 250 volts
(50x for 100 uS)
STANDARDS COMPLIANCE
nFCC
part 15 / ICES-003; EN55022; IEC61326-1
for electrical safety
nUL1604/CSA C22.2/213 for hazardous locations
nEN60079-15 (Zone 2) for hazardous locations
nMIL-STD-461E for EMC performance
nMIL-STD-810F for environmental performance
nMIL-STD-1275B for power protection
nUL508/CSA C22.2/14
MANAGED MODELS
n
n
n
n
n
n
n
n
n
n
n
n
USB / RS232 console port via MIL-STD-38999 series III connector
w/ shell size A, style 35, 6 socket contacts & A keying
Real-time RingTM or Rapid Spanning Tree (RSTP) for fast
redundant ring or mesh networks.
Priority queuing for real-time performance
SNMP v1 and V2 for network management
SNMP v3 for authentication and encryption
SNMP notifications (traps) for report on event
IGMP v1 & v2 for IP multicast filtering
VLAN (port & tag based) for traffic segregation
Message filtering to stop broadcast/multicast storms
RMON and port mirroring for diagnostics
Configuration via secure (https) Web interface, Telnet / SSH
(network), terminal (RS232) or SNMP (v1, v2, v3)
And much more (contact us for latest features list)
RECOMMENDED INTERFACE PLUGS
n
Ethernet Plug – D38999/26WA35PN
Power Plug – D38999/26WA98SA
n USB/RS232 Plug – D38999/26WA35PA
n
ORDERING GUIDE
ET-8ES-MIL-1
ET-8MS-MIL-1
8-port unmanaged IP67 switch
8-port managed IP67 switch
(Note: Receptacle caps are included with the switch)
ET-CAT6M-xCD*
Cordset, military-style plug to RJ45, x=meters
(Note: Contact Sixnet for other cordset and cable options)
ET-MILPWR-C2
ET-MIL232-C2
Cordset, power plug to leads, 2 meters
Cordset, military-style plug to 232/USB, 2 m
* See separate datasheet for cable specs
MECHANICAL DRAWING
2.45" [62.2mm]
With Cap Installed
ENVIRONMENTAL
temperature: -40 to +75°C (cold startup at -40°C)
temperature: -40 to +85 °C
nHumidity (non-condensing) 5 to 95% RH
nVibration, shock & freefall per MIL-STD-810F
& IEC68-2-6, -27 & -32
nVent plug for high altitude operation
4.00"
[101.6mm]
RS232/USB
Port
(managed only)
nOperating
nStorage
10.50"
[266.7mm]
Pressure
Vent Plug
PHYSICAL
n
Dimensions
nWeight
nIP67
(L x W x H) 10.5 x 4 x 2.45” (267 x 102 x 62mm)
(including caps) 2.20 lbs (1 Kg)
dust, oil and water-tight package protection
Power Input
All specifications are subject to change. Consult factory for latest info.
331 Ushers Road • Ballston Lake, NY 12019 • USA • +1 518 877 5178 • [email protected]
www.sixnet.com
Rev: 04-12-10