Model 5298 Triaxial 2 Lug (F) To BNC (M) Adapter Model 5298 Triaxial 2 Lug (F) To BNC (M) Adapter Features Converts instruments with BNC inputs to triaxial, 2 lug for better shield performance Triaxial center and intermediate contacts are gold plated, Beryllium Copper for long insertion cycle life and low contact resistance Adapter outer shell has tarnish resistant plating Materials Outer Shell: Nickel plated Brass Contacts (Triaxial): Center: Gold plated Beryllium Copper Intermediate: Gold plated Beryllium Copper Outer Contact: Tarnish resistant brass BNC: Nickel plated brass Marking: “POMONA ELECT. 5298” (optional) Ratings Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms/60 Vdc. Maximum voltage for hands free use in controlled testing environments: 500 Vdc Do not use on circuits where transient stresses can exceed the rated voltage. Frequency Range: DC to 500 MHz. Ordering Information Model: 5298 BNC (M)/2 LUG TRIAXIAL (F) USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1094418 Rev. 101 Page 1 of 1