Pomona®

Model PT080
High Density Pin Tip Plug,
Each End
Pomona®
FEATURES:
• Mate to Model #3542, 4773 or any other standard .08 inch pin jack.
• Ideal for use as jumper wires on chassis boxes.
MATERIALS:
Conn: Pin Tip Plug
Material: Brass Per QQ-B-626, Alloy 360, ½ Hard.
Finish: Gold plated per MIL-G-45204, Type II, Class 00 over electroless nickel per MIL-C-26074,
Class I, 200/300 microinches.
Insulation: Polypropylene molded to plug body and wire.
Color: Matches color of wire.
Marking: “POMONA ELECTRONICS CALIF.”
Wire: 22 AWG, stranding 19 x 34, t.c., PVC insulated, 1.63 (.064) O.D.
Color: See Ordering Information.
Marking: “POMONA PT080-XX”
RATINGS:
Operating Temperature: +55ºC (+131ºF) Max
Operating Voltage: 1000 WVDC
Current: 3 Amperes Cont.
ORDERING INFORMATION: Model PT080-XX-*
XX = Cable Lengths, Standard Lengths: 8” (203mm)
Additional lengths can be quoted upon request.
*= Color, -0 Black, -2 Red
Ordering Example: PT080-8-2, Indicates 8” in length, Color is Red
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
10/1/07
D1095064
Rev. 100
Made in USA
Sales: 800-490-2361 Fax: 425-446-5844
Technical Support: [email protected]
www.pomonaelectronics.com
Page 1 of 1