G023 Active Antenna Engineering Specification 1. Explanation of Product Number H 2 M 3 G 0 (1) 2 (2) 3 (3) x x (4) x (5) x 0 0 (6) Product Code: (1) Product type: G: GPS (2) Series code: 02 (3) Input voltage: 3: 2.5~ 5.5V (4) Cable type: 0: 0M 1: 2M / RG-174 2: 3M / RG-174 3: 5M / RG-174 4: 6M / RG-174 Unictron Technologies Corp. 2013-03-28 詠業科技股份有限公司 Unictron Technologies Corporation Website:www.unictron.com Prepared by : Nacy Designed by : Jason TITLE：G023 Active Antenna Engineering Specification Document Control Center THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION Checked by : Jason DOCUMENT NO. Approved by：Herbert REV. H2M3G023xxxx00 PAGE 1 UNIT：mm O OF 6 5: 10M / RG-174 6: 20M / RG-174 9: 2.5M / RG-174 A: 1.5M / RG-174 C: 1M / RG-174 E: 16M / RG-174 F: 30M / RG-174 G: 4M / RG-174 (5) Radome ／Label／Magnet: 0: not required ／ not required ／ not required 1: required ／ not required ／ required 2: required ／required ／required 3: required ／ required ／ not required 4: required ／ not required ／ not required (6)Connector: 00: No connector 01: SMA plug 02: SMA jack 03: SMA plug R/A 04: SMB plug 05: SMB jack 06: SMB plug R/A 07: MCX plug 08: MCX jack 09: MCX plug R/A 10: MMCX plug 11: MMCX jack 12: MMCX plug R/A 13: MMCX R/P 14: MMCX R/P R/A 24: SMC plug 25: SMC jack 26: SMA R/P 99: Reference spec Unictron Technologies Corp. 2013-03-28 詠業科技股份有限公司 Unictron Technologies Corporation Website:www.unictron.com Prepared by : Nacy Designed by : Jason TITLE：G023 Active Antenna Engineering Specification Document Control Center THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION Checked by : Jason DOCUMENT NO. Approved by：Herbert REV. H2M3G023xxxx00 PAGE 2 UNIT：mm O OF 6 2. Application: This application shall apply for antenna unit which shall be used with an engine for an automobile.(for impedance 50Ω) 3. Appearance: Antenna Unit （with radome , connector , and cable – referring to the attached drawing） Dimensions Weight Color 4. 45*45*14.5mm (circular) 110±10 g (typical) Black Operating Condition: Temperature Humidity 5. -40 to +85 °C 10 to 95% RH Storage Condition: Temperature Humidity 6. -25 to +85 °C 20 to 70% RH Electrical Specification: 6-1) Passive Antenna Characteristics Specification Working Frequency * Bandwidth (10dB return loss) Gain at Zenith 1575.42 MHz 10 MHz typical 5.0 dBic typical Gain at 10o elevation -1.0 dBic typical Polarization Axial Ratio Outline Dimension R.H.C.P. 3.0 dB typical 25.0 x 25.0 x 4.0 (mm) Unictron Technologies Corp. * Working frequency will be offset to another working frequency according to the 2013-03-28 conditions of user’s ground plane and radome. 詠業科技股份有限公司 Unictron Technologies Corporation Website:www.unictron.com Prepared by : Nacy Designed by : Jason TITLE：G023 Active Antenna Engineering Specification Document Control Center THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION Checked by : Jason DOCUMENT NO. Approved by：Herbert REV. H2M3G023xxxx00 PAGE 3 UNIT：mm O OF 6 6-2) LNA Characteristics Specification Center Frequency Gain 1575.42 ±1.023 MHz Noise Figure 1.0 dB typical Saw filter Filter Out of band attenuation 1476 ~ 1526 MHz 35 dB typical 1625 ~ 1676 MHz 48 dB typical Output V.S.W.R Voltage Current 2.0 max DC = 2.5~5.5V DC = 4~21mA (10mA at 3V) typical 19 ~ 36 dB ( 30dB at 3V) typical ＊All value are defined at 25±15 °C ,65±20 % RH, power handling 1 μw, air pressure 960 ±100 HPA unless otherwise noted. ＊Patch characteristics are measured with 70x70 mm ground plane in an anechoic chamber. 7. Dimensions of Antenna: 7-1).External dimensions: (waterproof construction) (unit:mm) Unictron Technologies Corp. 2013-03-28 詠業科技股份有限公司 Unictron Technologies Corporation Website:www.unictron.com Prepared by : Nacy Designed by : Jason TITLE：G023 Active Antenna Engineering Specification Document Control Center THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION Checked by : Jason DOCUMENT NO. Approved by：Herbert REV. H2M3G023xxxx00 PAGE 4 UNIT：mm O OF 6 7-2).Internal dimensions: (unit:mm) 8. Radiation Pattern(exclude LNA Gain from GL03): Far-field amplitude of 060427--02N03.nsi Ppol Xpol 345 0 15 330 30 315 45 300 60 285 75 270 -30 -20 -10 0 dB 255 90 105 240 120 225 135 210 150 195 180 165 Ppol:RHCP Unictron Technologies Corp. Xpol:LHCP Ps : Total Gain = Radiation Pattern(exclude LNA Gain from GL03) + LNA Gain - cable loss(RG-174:1.1dB/m) 2013-03-28 詠業科技股份有限公司 Unictron Technologies Corporation Website:www.unictron.com Prepared by : Nacy Designed by : Jason TITLE：G023 Active Antenna Engineering Specification Document Control Center THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION Checked by : Jason DOCUMENT NO. Approved by：Herbert REV. H2M3G023xxxx00 PAGE 5 UNIT：mm O OF 6 9.Package:(unit:mm) Description: 1 .Each PE bag contains one piece of G023 Active Antenna 2 .All PE bags are sealed by sealing machine, impulse sealer setting at 4.5~5. Unictron 3 .Each Carton contains 100 pieces of G023 Active Antenna (welled packed in PE bag) with the Technologies top and bottom Corp. cardboards and proper buffer stuff to fill the vacancy. 2013-03-28 詠業科技股份有限公司 Unictron Technologies Corporation Website:www.unictron.com Prepared by : Nacy Designed by : Jason TITLE：G023 Active Antenna Engineering Specification Document Control Center THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION Checked by : Jason DOCUMENT NO. Approved by：Herbert REV. H2M3G023xxxx00 PAGE 6 UNIT：mm O OF 6