～ 立 式 微 小 型 保 險 絲 ～ Fuses for Instrument, Power and Telephone (Non-indicating) 1 適用範圍:本標準適用於保護儀器、電源供應器和電話機用之立式微小型熔斷保險絲。 Available Range: For protecting instruments, power supplies and telephone sets. 2 形狀及尺寸如下圖 單位: mm Shape & Size as following illustrations. HERE FOLD KEEP 1 PCS SPACE 構造形狀 Structure & Shape : 如上圖 As shown in figure above 額定電壓 Rated Voltage: 250V AC 2.3 額定電流 Rated Current: 50mA~6.3A 3 材料 Material: 3.1 上蓋:不透明塑膠套蓋且不可破裂或變形。 Cap: Non-Transparent plastic Cap. No breaking or deformation is allowed. 3.2 下座:不透明塑膠底座且不可破裂或變形。 Base: Non-Transparent plastic base. No breaking or deformation is allowed. 3.3 兩端端腳:須以導電率良好之鍍錫黃銅為材料。 Two copper leads: Made of tin-plated copper wire for good conductivity. 2.1 2.2 NO. A B C D Part Name 部 品 名 稱 Plastic Cap – Black 塑膠套蓋 – 黑色 Plastic base – Black 方形底座 – 黑色 Fuse Element 可熔體 Two copper leads 兩端端腳 Volume 數量 1 1 1 2 4 電氣特性Electrical Characteristics: 4.1 負載容量: 通過額定電流值 150 % ( 亦即 1.5 x In A )， 1小時能繼續通電無任何熔化現象。 Loading Capacity: Loading the 150 % Listed Electrical Current (i.e. 1.5 x In A) for flowing, and it's available to let current keep on flowing without any melting. (Can keep 1 Hour minimum) 4.2 壓降測量：以額定電流，通過保險絲，其兩端壓降值不得超過最大值，可參考 IEC60127-3 Sheet 3。 Voltage drop: Loading 100% of rated current.(ie 1.0 x In), the voltage drops across the fuse-links shall not exceed the maximum values given on the relevant standard sheet ( IEC 60127-3 sheet 3 ) 4.3 過載熔斷: 請參照下表。Melting due to overloading: Details as follows Table. ※最大熔斷時限Operating Characteristics 安培數 150% Rating 210% Rating Rating Min. 50mA~5A 6.3A 275% Rating 400% Rating 1000% Rating Max. Min. Max. Min. Max. Min. 60min 30min 10ms 3sec 3ms 300ms 20ms 60min 30min 10ms 5sec 3ms 300ms 20ms Max. 5 機械特性 Mechanical Properties: 5.1 拉力測試 Tensile Test : 上蓋與下座組合之拉力至少3 kg。 For the tensile test, the force applied shall be 3 kg at least between cover and base. 5.2 推力測試 Thrust Test : 施力為 2牛頓，附腳不發生鬆動現象。 For the thrust test, the force applied shall be 2 N, the lead wire. 5.3 彎折強度 Bending Test : 附腳經過兩次反向之彎折後(彎折90度再折回原位謂之一次彎折) 不發生損壞。 No damage are to be visualized after two bends of opposite directions (bending through an angle of 90° and back is defined as one bend) of lead. 6 突波實驗 Surge Test: 為適應電感或電容性電路所產之暫態電流，本品可承受最少1ms 10 In 電流之突波。 In order to stand transient current caused by inductive or capacitive, the fuses are designed to have minimum clearing time of 1 millisecond at 1000% rated current. 7 耐久實驗 Endurance(On-Off Test): 7.1 於額定電流 (1.0 x In )，1小時ON，15分鐘OFF，共100次。 Loading 100% rated current (1.0 x In), 1 hour ON, 15 minutes OFF. Keep 100 cycles. 7.2 接著以1.5倍之額定電流(1.5 x In) 通過1小時。 Followed by 1 Hour at 1.5 times the rated current (1.5 x In). 7.3 再以4-2之方式量測壓降值，所測得之壓降值不可比原值增加10%以上。 The voltage drop across the fuse-link after the test shall not have increased by more than 10% of the original value measured before the test. 8 遮斷能力Breaking Capacity(Interrupting rating): 35 amperes or 10 × rated current ; whichever is greater at 250V AC. 9 包裝 1000 PCS/盒 內盒印明下列標示:料號、額定(電壓、電流、遮斷能力)及安規名稱。 Packing : 1000 pcs in an inner box. The following items indicated on the box. Mark: Catalog number; ratings (voltage, current, interrupting capacity), and safety mark. 10 其他 Other: 10.1 除非另有指定，上述機械、電器特性，係於常溫，標準狀況下測試之。 Unless otherwise, specified, all tests to be performed at 25±5℃ and 35-75% RH. 10.2 於標準狀況下儲放一年，本品乃確保上述機械與電氣之特性。 After one year's storage under normal condition, this item is guaranteed to meet the requirements mentioned above. 11 標記/安規認證 Mark/ Safety certification: Nominal Resistance Mark Cold Ohms Approvals 50 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 4.1970 63 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 2.8020 80 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 1.7100 100 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 1.6720 125 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 1.0002 160 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.8290 200 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.5200 250 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.5018 315 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.3820 400 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.2600 500 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.2471 630 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.1460 800 mA ＊＊ ＊＊ ＊＊ ＊ ＊＊ 0.1040 1A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0800 1.25 A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0581 1.6 A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0406 2A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0330 2.5 A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0229 3.15 A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0179 4A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0133 5A ＊ ＊＊ ＊＊ ＊ ＊＊ ＊＊ 0.0109 ＊＊ ＊＊ ＊＊ ＊＊ 6.3 A 0.0072 ＊: 有安規認證 Have safety certify ＊＊: 有安規認證及保險絲上蓋有安規印字標記Have safety certify and safety mark on the cover 12 系列品名列表 series model list : 品名 安培數 Type Ampere Rating MSF ___A ___V ___ 50mA~6.3A MSF A V 1 2 3 4 1 系列品名 Series Model : MSF 2 安培數 Ampere Rating : 50mA~6.3A 3 伏特數 Voltage : 250V 4 包裝規範 Packaging Code : 包裝規範 說明 Packaging Code Description 1000 pcs:打帶(長腳) 1000 pcs on Taped(Long Lead) 1000 pcs:散裝(短腳) (BK) 1000 pcs in Bulk(Short Lead) 例: * The curves are average value, for reference only * MODEL ENGINEER DEPT. APPROVE MSF series(PF) Alvin Lin Angus Hsiao Arthur Tsai * The curves are average value, for reference only * MODEL 2 MSF I t ENGINEER DEPT. APPROVE Alvin Lin Angus Hsiao Arthur Tsai