® MURF3020CT – MURF3060CT 30A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER WON-TOP ELECTRONICS Pb Features Glass Passivated Die Construction Superfast 35nS and 50nS Recovery Time Low Forward Voltage Drop Low Reverse Leakage Current High Surge Current Capability Epoxy Meets UL 94V-0 Classification Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes B C PIN1 2 3 D Mechanical Data A G F Case: ITO-220, Full Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 1.9 grams (approx.) Mounting Position: Any Mounting Torque: 0.6 N.m Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 E Dim ITO-220 Min Max A 14.60 15.40 B 9.70 10.30 C 2.55 2.85 D — 4.16 E 13.00 13.80 F 0.50 0.75 G 3.00 Ø 3.50 Ø H 6.30 6.90 I 4.20 4.80 J 2.50 2.90 P K 0.50 0.75 L 2.60 3.30 P 2.29 2.79 I H L All Dimensions in mm PIN 1 J PIN 3 PIN 2 K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 110°C Total Device Per Diode Symbol MURF 3020CT MURF 3030CT MURF 3040CT MURF 3060CT Unit VRRM VRWM VR 200 300 400 600 V VR(RMS) 140 210 280 420 V IO 30 15 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 200 A Forward Voltage per diode @IF = 15A VFM @TC = 25°C @TC = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ 1.05 1.25 1.7 10 500 35 V µA 50 175 nS 145 pF Thermal Resistance Junction to Ambient per diode Thermal Resistance Junction to Case per diode RθJA RθJC 62 4.0 °C/W RMS Isolation Voltage, t = 1 min VISO 1500 V TJ, TSTG -55 to +150 °C Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. © Won-Top Electronics Co., Ltd. Revision: March, 2014 www.wontop.com 1 ® WON-TOP ELECTRONICS 24 18 12 6 Resistive or Inductive Load 0 15 10 MURF3020CT MURF3030CT MURF3040CT 1.0 MURF3060CT 0 30 45 60 75 90 105 120 135 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 200 Single Half-Sine-Wave JEDEC Method 160 120 80 40 0 0.4 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 100 TC = 125°C TC = 100°C 10 1.0 TC = 25°C 0.1 0.01 1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 500 DC, TJ = 150°C Per Diode 20 MURF3030CT MURF3040CT 15 MURF3060CT 10 MURF3020CT 5 0 CJ, JUNCTION CAPACITANCE (pF) 25 PD, POWER DISSIPATION (W) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 30 IR, INSTANTANEOUS REVERSE CURRENT (µA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) MURF3020CT – MURF3060CT f = 1MHz 400 300 MURF3020CT – MURF3040CT 200 100 MURF3060CT 0 0 www.wontop.com 2 8 12 16 4 20 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 0.1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: March, 2014 ® MURF3020CT – MURF3060CT WON-TOP ELECTRONICS MARKING INFORMATION MURF30xxCT MURF30xxCT xx Polarity = Device Number = 20, 30, 40 or 60 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT The full molded plastic package affords a major reduction of hardware as compared to a standard TO-220 package. However, precautions should be made in mounting procedure. 6-32 HEX Head Screw Plain Washer A conical washer should be used to apply proper force to the device. Screw should not be tightened with any type of air-forced torque or equipment that may cause crack on device package. A layer of thermal grease or thermal pad in the interface will be considerably helpful for heat dissipation. © Won-Top Electronics Co., Ltd. Revision: March, 2014 Rectifier Heatsink Conical Washer 6-32 HEX Nut www.wontop.com 3 ® MURF3020CT – MURF3060CT WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity MURF3020CT ITO-220 50 Units/Tube MURF3030CT ITO-220 50 Units/Tube MURF3040CT ITO-220 50 Units/Tube MURF3060CT ITO-220 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MURF3020CT-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: March, 2014