BD2500 - BD2506 - Won-Top Electronics Co., Ltd.

®
BD2500 – BD2506
25A BOSCH TYPE PRESS-FIT DIODE
WON-TOP ELECTRONICS
Pb
Features

Diffused Junction




Low Leakage
Low Cost
High Surge Current Capability
Typical IR less than 5.0µA
Anode +
C
Mechanical Data






D
E
Case: 13mm Bosch Type Press-Fit
Terminals: Contact Areas Readily Solderable
Polarity: Cathode to Case (Reverse Units Are
Available Upon Request and Are Designated
By A “R” Suffix, i.e. BD2502R or BD2504R)
Polarity: Red Color Equals Standard,
Black Color Equals Reverse Polarity
Mounting Position: Any
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 2
Dim
B
A
Maximum Ratings and Electrical Characteristics
13mm Bosch
Min
Max
A
12.80
B
9.40
13.20
—
C
1.25
1.31
D
28.00
—
E
9.90
11.10
All Dimensions in mm
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
Unit
VRRM
VRWM
VR
50
100
200
300
400
500
600
V
VR(RMS)
35
70
140
210
280
350
420
V
IO
25
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on
Rated Load (JEDEC Method)
IFSM
300
A
Forward Voltage
@IF = 25A
VFM
1.0
V
@TA = 25°C
@TA = 100°C
IRM
5.0
500
µA
CJ
300
pF
RθJC
1.2
°C/W
TJ, TSTG
-65 to +175
°C
Peak Reverse Current
At Rated DC Blocking Voltage
@TC = 150°C
BD2500 BD2501 BD2502 BD2503 BD2504 BD2505 BD2506
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
© Won-Top Electronics Co., Ltd.
Revision: April, 2012
www.wontop.com
1
®
BD2500 – BD2506
WON-TOP ELECTRONICS
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
BD2500
13mm Bosch Press-Fit
180 Units/Box
BD2501
13mm Bosch Press-Fit
180 Units/Box
BD2502
13mm Bosch Press-Fit
180 Units/Box
BD2503
13mm Bosch Press-Fit
180 Units/Box
BD2504
13mm Bosch Press-Fit
180 Units/Box
BD2505
13mm Bosch Press-Fit
180 Units/Box
BD2506
13mm Bosch Press-Fit
180 Units/Box
1.
2.
Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
To order Lead Free version (with Lead Free finish), add “-LF” suffix to part
number above. For example, BD2500-LF.
WON-TOP ELECTRONICS and
are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and
believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the
purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein
without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road,
Chine Chen Dist., Kaohsiung 806, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
www.wontop.com
2
We power your everyday.
© Won-Top Electronics Co., Ltd.
Revision: April, 2012