4 DO NOT SCALE DRAWING 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. 1 REVISIONS REV DESCRIPTION A ORIGINAL RELEASE - ECN #08-510-0081 DATE 07/25/2008 ENGR C CHURCH D D 19.05 .75 102.11 4.02 4-40 UNC-2B PEM NUT TYP. 4 PLCS. 6.35 .25 TYP. 5.26 .207 44.45 1.75 C C 101.60 4.00 38.10 1.50 TYP. B B 4.77 TYP. CUSTOMER DRAWING VIRGINIA PANEL CORPORATION 140.21 5.52 WWW.VPC.COM ITA PCB MOUNTING PLATE A 2. SEE SHEET 2 FOR RECOMMENDED CUTOM PCB LAYOUT. 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM DIMENSIONS ARE SHOWN AS: [MILLIMETERS] INCHES NOTES: 4 3 2 SIZE B CAGE CODE 18117 DWG.NO. SCALE: 2:3 510109460 510109460 REV A 07/25/2008 SHEET 1 OF 2 1 A 4 3 2 1 D D XXX 22.86 .90 12.70 .50 57.15 2.25 3 C C 138.94 5.47 121.16 4.77 B 8.89 .35 B .129[3.264] THRU .225[5.715] X 100° TYP. 4 PLCS. 10.26 .40 38.10 1.50 A A 3 SHADED PORTION OF PCB NOT AVAILABLE FOR THRU HOLE COMPONTNET MOUNTING. MORE SPACE MAY BE REQUIRED FOR LARGER COMPONENTS. CUSTOMER DRAWING - CUSTOMER DRAWING - CUSTOMER DRAWING THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA SIZE CAGE CODE PANEL CORPORATION AND IS SUBMITTED FOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART SCALE: 2:3 FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. B NOTES: DO NOT SCALE DRAWING 4 3 2 18117 DWG.NO. 510109460 REV A 510109460 07/25/2008 SHEET 2 OF 2 1