8 7 6 5 4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS REV DESCRIPTION B ECN #08-410-0057 DATE 4/16/08 ENGR L HARMAN D D 406.400 16.00 365.760 14.40 24 EQ. SPCS. @ .600 25.400 1.00 THRU HOLES FOR MOUNTING ENCLOSURE USING EITHER M4 X 35 OR 6-32 X 1.38 THE CORRESPONDING THREADED INSERT WILL NEED TO BE PLACED IN THE ENCLOSURE C C 7.145 .28 TYP 8 PLCS 4.305 .17 TYP 8 PLCS 133.350 5.25 TYP. 152.400 6.00 5.080 .20 TYP 8 PLCS 109.601 4.32 TYP. 164.846 6.49 42.799 1.69 TYP. B 6.223 .25 B 120.650 4.75 TYP FOR RECEIVER PART NUMBER 310104363: 273.050 10.75 TYP 6.350 .25 ENCLOSURE MUST BE FLUSH TO BOTTOM OF ITA FRAME. THE WIDTH MAY GROW TO THE LEFT TO CUSTOMER NEEDS. THE WIDTH MAY GROW TO THE RIGHT UP TO 1.5 INCHES (38mm). THERE IS NO LIMIT TO THE HEIGHT OF THE ENCLOSURE. 393.700 15.50 A A CUSTOMER DRAWING VIRGINIA PANEL CORPORATION WWW.VPC.COM ITA, 9025, FRONT MOUNT 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM DIMENSIONS ARE SHOWN AS: NOTES: 8 7 [MILLIMETERS] INCHES 6 5 4 3 2 SIZE D CAGE CODE 18117 DWG.NO. SCALE: 1:2 410104409 410104409 REV B 3/14/07 SHEET 1 OF 2 1 8 7 6 5 4 1.12 ITA 410104409 D 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING .11 1 REVISIONS REV DESCRIPTION B ECN #08-410-0057 DATE 4/16/08 ENGR L HARMAN ENSURE THAT NOTHING PROTRUDES INTO THIS AREA WHEN DESIGNING A FIXTURE FOR USE WITH THIS ITA. DO NOT PLACE ANYTHING SUCH AS A HINGE OR SCREW HEAD THAT WILL CAUSE AN INTERFERENCE WITH THE RECIVER FRAME. D RECEIVER TOP PLATE B ITA TOP PLATE RECEIVER 310104363 SHOWN WITH SOME PARTS HIDDEN FOR CLARITY C C ENCLOSURE MUST BE FLUSH TO THE BOTTOM OF THE ITA TO PREVENT INTERFERENCE WITH THE PLATFORM ON RECEIVER PART NUMBER 310104363 B B RECEIVER PLATFORM A A CUSTOMER DRAWING VIRGINIA PANEL CORPORATION WWW.VPC.COM DETAIL B SCALE 1.5 : 1 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM ITA, 9025, FRONT MOUNT DIMENSIONS ARE SHOWN AS: NOTES: 8 7 [MILLIMETERS] INCHES 6 5 4 3 2 SIZE D CAGE CODE 18117 DWG.NO. SCALE: 1:2 410104409 410104409 REV B 3/14/07 SHEET 2 OF 2 1