4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS DATE 5/17/13 DESCRIPTION REV E ECN #4633 ENGR L LOCKRIDGE D D 380.14 14.97 C C 16.00 SHOWN MOUNTED TO ITA 410104111 B B 27.50 1.08 186.69 7.35 122.05 4.81 137.16 5.40 35.56 1.40 CUSTOMER DRAWING A 3. HOUSING: MATERIAL = .06" [1.52] ALUMINUM. FINISH = PAINTED COVER: MATERIAL = .12" [3.05] ALUMINUM FINISH = BLACK ANODIZED VIRGINIA PANEL CORPORATION WWW.VPC.COM ENCLOSURE ITA 25 MODULE FRONT MOUNT 2. HARDWARE IS INCLUDED FOR USE WITH ITA P/N: 410104111 REV H OR LATER. DIMENSIONS ARE SHOWN AS: 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 A [MILLIMETERS] INCHES 3 2 SIZE C CAGE CODE DWG.NO. 18117 SCALE: 1:3 REV 410112823 410112823 1 E 04/11/2008 SHEET 1 OF 2 4 3 2 1 D D 25.40 1.00 355.60 14.00 25.40 1.00 C C 341.12 13.43 SHADED REGION REPRESENTS RECOMMENDED MACHINABLE AREA ON COVER. FEATURES OUTSIDE OF THIS REGION MAY INTERFERE WITH EXISTING COMPONENTS OR FEATURES. 328.32 12.93 B B 101.60 4.00 152.40 6.00 A A CUSTOMER DRAWING - CUSTOMER DRAWING - CUSTOMER DRAWING DO NOT SCALE DRAWING 4 3 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTED FOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. 2 SIZE C CAGE CODE DWG.NO. SCALE: REV 410112823 18117 1:2 410112823 1 E 04/11/2008 SHEET 2 OF 2