TS1117B 1A Low Dropout Positive Voltage Regulator SOT-223 Pin Definition: 1. Fixed / Adj 2. Output (Tab) 3. Input SOP-8 Pin Definition: 1. Fixed / Adj 2. Output 3. Output 4. Input 8. N/C 7. Output 6. Output 5. N/C No tR TS eco 11 mm 17 BC end S3 ed 3 TO-252 (DPAK) General Description TS1117B are high performance positive voltage regulators are designed for use in applications requiring low dropout performance at full rated current, Additionally, TS1117B provides excellent regulation over variations due to changes in line, load and temperature. Outstanding features include low dropout performance at rated current, fast transient response, internal current limiting and thermal shutdown protection of the output device. TS1117B are three terminal regulators with fixed and adjustable voltage options available in popular packages. Features Ordering Information ● ● ● ● ● ● ● ● Low Dropout Performance 1.5V max. Fill Current Rating Over Line and Temperature Fast Transient Response Built-in thermal shutdown Output Current Limit Line Regulation Typical 0.2% Load Regulation Typical 0.05% Low-ESR Ceramic Capacitor (MLCC) Required for Stability. ● Good Ripple Rejection Part No. Package Packing TS1117BCPxx ROG TO-252 2.5kpcs / 13” Reel TS1117BCWxx RPG SOT-223 2.5kpcs / 13” Reel TS1117BCSxx RLG SOP-8 2.5kpcs / 13” Reel Note: Refer to detail ordering information table. “G” denotes Halogen Free Products Typical Application Circuit Block Diagram Fixed Output Voltage Version VOUT = VREF(1+R2/R1) + Iadj R2 Adjustable Output Voltage Version 1/8 Version: F14 TS1117B 1A Low Dropout Positive Voltage Regulator Absolute Maximum Ratings (Note 1) Parameter Symbol VIN (Opr. Typ.) PD Limit Unit 15 12 Internal limited 105 130 160 -40 ~ +125 +150 -65 ~ +150 5 2 V V No tR TS eco 11 mm 17 BC end S3 ed 3 Input Supply Voltage Recommend Operation Input Supply Voltage Power Dissipation (Note 2) TO-252 Thermal Resistance SOT-223 Junction to Ambient SOP-8 Operating Temperature Range Junction Temperature Range Storage Temperature Range TO-252 / SOT-223 o Lead Soldering Temperature (260 C) SOP-8 VIN RӨJA TOPER TJ TSTG o C/W o C s Electrical Specification (TA=25oC, unless otherwise specified.) Parameter Reference Voltage Output Voltage (Note 4) Conditions Min Typ Max Unit VIN = 2.75, Io=1A 1.225 1.25 1.275 V VIN = 2.7V~12V, Io=1A 1.176 1.2 1.224 V VIN = 3V~12V, Io=1A 1.470 1.5 1.530 V VIN = 3.3V~12V, Io=1A 1.764 1.8 1.836 V VIN = 4V~12V, Io=1A 2.450 2.5 2.550 V VIN = 4.8V~12V, Io=1A 3.235 3.3 3.366 V VIN = 6.5V~12V, Io=1A 4.900 5.0 5.100 V Line Regulation Vo+1.5V ≤ VIN ≤ 12V, Io= 10mA -- 0.2 0.5 % Load Regulation (Note 1,2) VIN = VOUT+1.5V, Io = 10mA~1A -- 0.05 1.0 % Dropout Voltage Io=1A, ∆VOUT = 1% VOUT -- 1.3 1.5 V Quiescent Current VIN = 5V -- 5 10 mA -- 90 -- µA 1.1 -- -- A -- 0.5 -- % Adjustable Pin Current Output Current Limit VIN - VOUT = 1.5V Temperature Stability Io=10mA, Ripple Rejection F= 120Hz, Io= 1A, COUT =25uF, VIN -60 70 dB = Vout+3V Note 1: See thermal regulation specification for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package. Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the input / output voltage difference and the output current. Guaranteed maximum power dissipation will not be available over the full input / output voltage range. Note 3: Quiescent current is defined as the minimum output current required to maintain the regulation. Note 4: The Output Capacitor does not have a theoretical upper limit and increasing its value will increase stability COUT=100uF or more is typical for high current regulator design. 2/8 Version: F14 TS1117B 1A Low Dropout Positive Voltage Regulator No tR TS eco 11 mm 17 BC end S3 ed 3 Electrical Characteristics Curve Figure 1. Vdrop vs. Output Current Figure 2. Load Regulation vs. Temperature Figure 3. Vout Change vs. Temperature Figure 4. Vout Deviation vs. Temperature Figure 5. Line Transient Response Figure 6. Load Transient Response 3/8 Version: F14 TS1117B 1A Low Dropout Positive Voltage Regulator Ordering information TO-252 SOT-223 SOP-8 No tR TS eco 11 mm 17 BC end S3 ed 3 Voltage ADJ TS1117BCP ROG TS1117BCW RPG 1.2V TS1117BCW12 RPG 1.8V TS1117BCW18 RPG 2.5V TS1117BCW25 RPG 3.3V TS1117BCP33 ROG TS1117BCW33 RPG 5V TS1117BCP50 ROG TS1117BCW50 RPG TS1117BCS33 RLG Packing code information Packing 2.5kpcs / 13" Reel 2.5kpcs / 13" Reel 4/8 2.5kpcs / 13" Reel Version: F14 TS1117B 1A Low Dropout Positive Voltage Regulator No tR TS eco 11 mm 17 BC end S3 ed 3 TO-252 Mechanical Drawing Unit: Millimeters Marking Diagram Y M L XX CP = Year Code = Month Code for Halogen Free Product (O=Jan, P=Feb, Q=Mar, R=Apl, S=May, T=Jun, U=Jul, V=Aug, W=Sep, X=Oct, Y=Nov, Z=Dec) = Lot Code = Output Voltage (3.3=3.3V, 5.0=5V) = Adjustable Voltage 5/8 Version: F14 TS1117B 1A Low Dropout Positive Voltage Regulator No tR TS eco 11 mm 17 BC end S3 ed 3 SOT-223 Mechanical Drawing Unit: Millimeters Marking Diagram Y M L XX = Year Code = Month Code for Halogen Free Product (O=Jan, P=Feb, Q=Mar, R=Apl, S=May, T=Jun, U=Jul, V=Aug, W=Sep, X=Oct, Y=Nov, Z=Dec) = Lot Code = Output Voltage (1.2=1.2V, 1.8=1.8V, 2.5=2.5V, 3.3=3.3V, 5.0=5V) 6/8 Version: F14 TS1117B 1A Low Dropout Positive Voltage Regulator No tR TS eco 11 mm 17 BC end S3 ed 3 SOP-8 Mechanical Drawing Unit: Millimeters Marking Diagram Y M L XX = Year Code = Month Code for Halogen Free Product (O=Jan, P=Feb, Q=Mar, R=Apl, S=May, T=Jun, U=Jul, V=Aug, W=Sep, X=Oct, Y=Nov, Z=Dec) = Lot Code = Output Voltage (3.3=3.3V) 7/8 Version: F14 TS1117B No tR TS eco 11 mm 17 BC end S3 ed 3 1A Low Dropout Positive Voltage Regulator Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 8/8 Version: F14