ABS20M Taiwan Semiconductor CREAT BY ART 2A, 1000V Glass Passivated Bridge Rectifier FEATURES - Glass passivated junction - Ideal for automated placement - Reliable low cost construction utilizing molded plastic technique - High surge current capability - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 ABS MECHANICAL DATA Case: Molded plastic body Molding compound, UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: Polarity as marked on the body Weight: 0.096 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL ABS20M UNIT Maximum repetitive peak reverse voltage VRRM 1000 V Maximum RMS voltage VRMS 700 V Maximum DC blocking voltage VDC 1000 V Maximum average forward rectified current On glass-epoxy On aluminum substrate IF(AV) 1.6 2.0 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A Peak forward surge current, 1 ms single half sine-wave superimposed on rated load TJ=25°C TJ=125°C TJ=25°C Maximum instantaneous forward voltage IF= 1 A TJ=125°C (Note 1) TJ=25°C IF= 2 A TJ=125°C Typical thermal resistance Operating junction temperature range Storage temperature range TJ=25°C TJ=125°C VF IR A 90 I2t Rating for fusing (t<8.3ms) Maximum reverse current @ rated VR 110 IFSM A2s 10.375 TYP MAX 0.92 1.02 0.80 - - 1.10 0.94 5 150 V μA RθJL RθJA 30 85 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Document Number: DS_D0000106 Version: A15 ABS20M Taiwan Semiconductor ORDERING INFORMATION PART NO. PACKING CODE PART NO. PACKING CODE PACKING ABS 1,000 / 7" Plastic reel ABS 5,000 / 13" Paper reel SUFFIX SUFFIX ABS20M (Note 1) PACKAGE RE H G RG Note 1: Whole series with green compound EXAMPLE PREFERRED P/N PART NO. ABS20MHREG ABS20M PART NO. PACKING CODE PACKING CODE SUFFIX H DESCRIPTION SUFFIX RE AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE 100 2 1.5 1 0.5 On Aluminum substrate 0 0 25 50 75 100 125 150 INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) 2.5 FIG. 2 TYPICAL REVERSE CHARACTERISTICS TJ=125°C 10 1 0.1 TJ=25°C 0.01 0 20 AMBIENT TEMPERATURE (oC) 60 80 100 PERCENT OF RATED PEAK REVERSE VOLYAGE(%) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 4 TYPICAL JUNCTION CAPACITANCE 100 50 8.3ms Single Half Sine-Wave 40 JUNCTION CAPACITANCE (pF) a PEAK FORWARD SURGE CURRENT (A) 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D0000106 100 10 1 0.1 1 10 100 REVERSE VOLTAGE (V) Version: A15 ABS20M Taiwan Semiconductor INSTANTANEOUS FORWARD CURRENT (A) FIG. 5 TYPICAL FORWARD CHARACTERISTICS 10 1 TJ=125°C TJ=25°C 0.1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS ABS Unit (mm) DIM. Unit (inch) Min Max Min Max B 4.30 4.50 0.169 0.177 C 6.25 6.65 0.246 0.262 D 0.60 0.70 0.024 0.028 E 3.90 4.10 0.154 0.161 F 4.90 5.10 0.193 0.200 G 1.40 1.60 0.055 0.063 H 1.35 1.45 0.053 0.057 I 0.05 0.15 0.002 0.006 J 0.30 0.70 0.012 0.028 K 0.15 0.25 0.006 0.010 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.50 0.059 B 0.90 0.035 C 4.22 0.166 D 7.22 0.284 E 2.05 0.081 F 5.72 0.225 MARKING DIAGRAM P/N = Specific Device Code YW = Date Code F = Factory Code Document Number: DS_D0000106 Version: A15 ABS20M Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D0000106 Version: A15