HERAF801G - HERAF808G CREAT BY ART 8.0AMPS. Isolated Glass Passivated High Efficient Rectifiers ITO-220AC Features UL Recognized File # E-326243 Glass passivated chip junction High efficiency, Low VF High current capability High reliability High surge current capability For use in low voltage, high frequency inverter, free wheeling, and polarity protection application Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Cases: ITO-220AC Molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity: As marked High temperature soldering guaranteed: 260℃/ 0.25", (6.35mm) from case for 10 seconds Mounting torque: 5 in-lbs. max Weight: 1.74 grams Ordering Information(example) Part No. Package Packing Packing code Packing code (Green) C0 C0G HERAF801G ITO-220AC 50 / TUBE Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Parameter Symbol HERAF HERAF HERAF HERAF HERAF HERAF HERAF HERAF 801G 802G 803G 804G 805G 806G 807G 808G 50 100 200 300 400 600 800 1000 Units Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 35 70 140 210 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 300 400 600 800 1000 V Maximum Average Forward Rectified Current IF(AV) 8 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 150 A Maximum Instantaneous Forward Voltage (Note 1) @8A Maximum DC Reverse Current at Rated DC Blocking Voltage @ TA=25 ℃ @ TA=125 ℃ VF 1.0 1.3 IR 1.7 uA 400 uA Trr 50 80 Typical Junction Capacitance (Note 3) Cj 80 60 Operating Temperature Range Storage Temperature Range V 10 Maximum Reverse Recovery Time (Note 2) Typical Thermal Resistance V nS pF O RθJC 2 TJ - 55 to + 150 O C - 55 to + 150 O C TSTG C/W Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:G13 RATINGS AND CHARACTERISTIC CURVES (HERAF801G THRU HERAF808G) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 8 4 RESISTIVE OR INDUCTIVELOAD WITH HEAT SINK 0 0 50 100 CASE TEMPERATURE (oC) FIG. 3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 150 120 TA=125℃ 10 TA=75℃ 1 TA=25℃ 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 90 FIG. 5- TYPICAL FORWARD CHARACTERISTICS 60 100 30 HERAF801G-HERAF804G TA=25℃ 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4- TYPICAL JUNCTION CAPACITANCE 180 JUNCTION CAPACITANCE (pF) 100 8.3mS Single Half Sine Wave JEDEC Method TA=25℃ f=1.0MHz Vsig=50mVp-p 150 120 HERAF801G-HERAF805G 90 HERAF806G-HERAF808G 60 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 150 INSTANTANEOUS REVERSE CURRENT (uA) AVERAGE FORWARD A CURRENT (A) 12 FIG. 2- TYPICAL REVERSE CHARACTERISTICS 1000 TA=25℃ 10 HERAF805G 1 HERAF806G-HERAF808G 30 0.1 0 1 10 100 1000 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) REVERSE VOLTAGE (V) Version:G13 Ordering information Part No. Package BULK Packing HERAF80xG ITO-220AC Note: "x" is Device Code from "1" thru "8". 50 / TUBE Packing code Packing code (Green) C0 C0G Dimensions DIM. Unit(mm) Unit(inch) Min Max Min Max A 4.30 4.70 0.169 0.185 B 2.50 3.10 0.098 0.122 C 2.30 2.90 0.091 0.114 D 0.46 0.76 0.018 0.030 E 6.30 6.90 0.248 0.272 F 9.60 10.30 0.378 0.406 G 3.00 3.40 0.118 0.134 H I 0.95 1.60 1.45 0.037 0.063 0.057 J 0.50 0.90 0.020 0.035 K 2.40 3.20 0.094 0.126 L 14.80 15.50 0.583 0.610 M - 4.10 - 0.161 N - 1.80 - 0.071 O 12.60 13.80 0.496 0.543 P 4.95 5.20 0.195 0.205 Marking Diagram P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Version:G13