600W Surface Mount Transient Voltage Suppressor SMBJ5.0A -440CA 600W Surface Mount Transient Voltage Suppressor SMB Features Stand-off voltage from 5.0 to 440 volts 600W Peak Pulse Power capability on 10/1000 μs waveform repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Low incremental surge resistance, excellent clamping capability Typical IR less than 1 uA above 10V High temperature soldering guaranteed:250°C/10 seconds at terminals This series is UL recognized under component index. File number E315008 RoHS Compliant Mechanical Data Case: Epoxy: Terminals: SMB JEDEC DO-214AA molded plastic Meets UL 94V-0 flammability rating Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Cathode indicated by color band except Bi-directional Weight: 0.003 ounces, 0.093 gram Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit 5.0 to 440 V 600 Minimum W Non-repetitive current pulse See Table A Non-repetitive current pulse Steady State Power Dissipation 5.0 W At TL(Lead Temperature)=75°C (Note 1) IFSM Peak Forward Surge Current 100 A Note 1 &2 VF Maximum Instantaneous Forward Voltage V IF=50A, Unidirectional Only V WM Stand-Off Voltage PPPM Peak Pulse Power Dissipation on 10/1000 us waveform IPPM Peak Pulse current on 10/1000 us waveform PM(AV) TJ,TSTG 3.5 VWM <200 5.0 VWM ≥200 Operating and Storage Temperature Range -55 to 150 TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415 Conditions °C Rev. G/AH Page 1 of 7 600W Surface Mount Transient Voltage Suppressor SMBJ5.0A -440CA Note: (1) PCB mounted on copper pad area of 0.2" x 0.2" (5.0mmx5.0mm). (2) 8.3ms single half sine-wave superimposed on rated load. Electrical Characteristics (T Ambient=25ºC unless noted otherwise) P/N (note1) Device Marking Code Stand-Off Voltage Breakdown Voltage @ Test Current V BR IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM VC (V) IPPM (A) ID (A) Max. Clamping Voltage @ IT(mA) Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. SMBJ5.0A SMBJ5.0CA KE KE 5.0 6.40 7.07 10 9.2 65.2 800/1600 SMBJ6.0A SMBJ6.0CA KG KG 6.0 6.67 7.37 10 10.3 58.3 800/1600 SMBJ6.5A SMBJ6.5CA KK AK 6.5 7.22 7.98 10 11.2 53.6 500/1000 SMBJ7.0A SMBJ7.0CA KM KM 7.0 7.78 8.60 10 12.0 50.0 200/400 SMBJ7.5A SMBJ7.5CA KP AP 7.5 8.33 9.21 1.0 12.9 46.5 100/200 SMBJ8.0A SMBJ8.0CA KR AR 8.0 8.89 9.83 1.0 13.6 44.1 50/100 SMBJ8.5A SMBJ8.5CA KT AT 8.5 9.44 10.4 1.0 14.4 41.7 20 SMBJ9.0A SMBJ9.0CA KV AV 9.0 10.0 11.1 1.0 15.4 39.0 10 SMBJ10A SMBJ10CA KX AX 10 11.1 12.3 1.0 17.0 35.3 5.0 SMBJ11A SMBJ11CA KZ KZ 11 12.2 13.5 1.0 18.2 33.0 5.0 SMBJ12A SMBJ12CA LE BE 12 13.3 14.7 1.0 19.9 30.2 5.0 SMBJ13A SMBJ13CA LG LG 13 14.4 15.9 1.0 21.5 27.9 1.0 SMBJ14A SMBJ14CA LK BK 14 15.6 17.2 1.0 23.2 25.9 1.0 SMBJ15A SMBJ15CA LM BM 15 16.7 18.5 1.0 24.4 24.6 1.0 SMBJ16A SMBJ16CA LP LM 16 17.8 19.7 1.0 26.0 23.1 1.0 SMBJ17A SMBJ17CA LR LR 17 18.9 20.9 1.0 27.6 21.7 1.0 SMBJ18A SMBJ18CA LT BT 18 20.0 22.1 1.0 29.2 20.5 1.0 SMBJ20A SMBJ20CA LV LV 20 22.2 24.5 1.0 32.4 18.5 1.0 SMBJ22A SMBJ22CA LX BX 22 24.4 26.9 1.0 35.5 16.9 1.0 SMBJ24A SMBJ24CA LZ BZ 24 26.7 29.5 1.0 38.9 15.4 1.0 SMBJ26A SMBJ26CA ME CE 26 28.9 31.9 1.0 42.1 14.3 1.0 SMBJ28A SMBJ28CA MG MG 28 31.1 34.4 1.0 45.4 13.2 1.0 SMBJ30A SMBJ30CA MK CK 30 33.3 36.8 1.0 48.4 12.4 1.0 SMBJ33A SMBJ33CA MM CM 33 36.7 40.6 1.0 53.3 11.3 1.0 (note2) Rev. G/AH www.taitroncomponents.com Page 2 of 7 600W Surface Mount Transient Voltage Suppressor SMBJ5.0A -440CA Device Marking Code P/N Stand-Off Voltage Breakdown Voltage @ Test Current IPPM V BR Uni-Polar Bi-Polar Uni Bi SMBJ36A SMBJ36CA MP CP SMBJ40A SMBJ40CA MR SMBJ43A SMBJ43CA SMBJ45A V WM Max. Clamping Voltage@ IT(mA) VC (Volts) Max. Peak Pulse Current IPPM Max. Reverse Leakage Current @ V WM ID (A) Min. Max. 36 40.0 44.2 1.0 58.1 10.3 1.0 CR 40 44.4 49.1 1.0 64.5 9.3 1.0 MT CT 43 47.8 52.8 1.0 69.4 8.6 1.0 SMBJ45CA MV MV 45 50.0 55.3 1.0 72.7 8.3 1.0 SMBJ48A SMBJ48CA MX MX 48 53.3 58.9 1.0 77.4 7.8 1.0 SMBJ51A SMBJ51CA MZ MZ 51 56.7 62.7 1.0 82.4 7.3 1.0 SMBJ54A SMBJ54CA NE NE 54 60.0 66.3 1.0 87.1 6.9 1.0 SMBJ58A SMBJ58CA NG NG 58 64.4 71.2 1.0 93.6 6.4 1.0 SMBJ60A SMBJ60CA NK NK 60 66.7 73.7 1.0 96.8 6.2 1.0 SMBJ64A SMBJ64CA NM NM 64 71.1 78.6 1.0 103 5.8 1.0 SMBJ70A SMBJ70CA NP NP 70 77.8 86.0 1.0 113 5.3 1.0 SMBJ75A SMBJ75CA NR NR 75 83.3 92.1 1.0 121 5.0 1.0 SMBJ78A SMBJ78CA NT NT 78 86.7 95.8 1.0 126 4.8 1.0 SMBJ85A SMBJ85CA NV NV 85 94.4 104 1.0 137 4.4 1.0 SMBJ90A SMBJ90CA NX NX 90 100 111 1.0 146 4.1 1.0 SMBJ100A SMBJ100CA NZ NZ 100 111 123 1.0 162 3.7 1.0 SMBJ110A SMBJ110CA PE PE 110 122 135 1.0 177 3.4 1.0 SMBJ120A SMBJ120CA PG PG 120 133 147 1.0 193 3.1 1.0 SMBJ130A SMBJ130CA PK PK 130 144 159 1.0 209 2.9 1.0 SMBJ150A SMBJ150CA PM PM 150 167 185 1.0 243 2.5 1.0 SMBJ160A SMBJ160CA PP PP 160 178 197 1.0 259 2.3 1.0 SMBJ170A SMBJ170CA PR PR 170 189 209 1.0 275 2.2 1.0 SMBJ180A* SMBJ180CA* PT ET 180 201 222 1.0 292 2.1 1.0 SMBJ200A* SMBJ200CA* PV EV 200 224 247 1.0 324 1.9 1.0 (Volts) (Amps) Rev. G/AH www.taitroncomponents.com Page 3 of 7 600W Surface Mount Transient Voltage Suppressor SMBJ5.0A -440CA Device Marking Code P/N Stand-Off Voltage Breakdown Voltage @ Test Current IPPM V BR Uni-Polar Bi-Polar Uni Bi SMBJ220A* SMBJ220CA* PX EX SMBJ250A* SMBJ250CA* PZ SMBJ300A* SMBJ300CA* SMBJ350A* V WM Max. Clamping Voltage@ IT(mA) VC (Volts) Max. Reverse Leakage Current @ V WM Max. Peak Pulse Current IPPM ID (A) Min. Max. 220 246 272 1.0 356 1.7 1.0 EZ 250 279 309 1.0 405 1.5 1.0 QZ FE 300 335 371 1.0 486 1.3 1.0 SMBJ350CA* QG FG 350 391 432 1.0 567 1.1 1.0 SMBJ400A* SMBJ400CA* QK FG 400 447 494 1.0 648 0.9 1.0 SMBJ440A* SMBJ440CA* QM FM 440 492 543 1.0 713 0.9 1.0 (Volts) (Amps) Note: 1. For parts with suffix A, the V BR is +/- 5%. 2. For Bi-directional type having VWM of 10V or less, the ID limit is double. 3. Part number with *, don’t get UL approval. Typical Characteristics Curves Fig.2- Peak Pulse Power Rating Curve PPPM OR IPPM (%) PPPM Peak Pulse Power (KW) Fig.1- Peak Pulse Power Derating Curve Ambient Temperature Ta (°C) Non-repetitive Pulse Waveform Shown in Fig 3 Mounted on 5mm×5mm Copper Pads Areas Pulse Width td Rev. G/AH www.taitroncomponents.com Page 4 of 7 600W Surface Mount Transient Voltage Suppressor SMBJ5.0A -440CA Fig.4- Max. Non-Repetitive Forward Surge Current IPPM Peak Pulse current (%) IFSM Forward Surge Current (A) Fig.3- Pulse Waveform Time t (ms) Number of Cycles at 60Hz Fig.6- Capacitance for Bi-direction CJ Capacitance (pF) CJ Capacitance (pF) Fig.5- Capacitance for Uni-direction Breakdown Voltage (VBR) Breakdown Voltage (VBR) Marking Information: Uni-directional Bi-directional Rev. G/AH www.taitroncomponents.com Page 5 of 7 600W Surface Mount Transient Voltage Suppressor SMBJ5.0A -440CA Dimensions in inches (mm) SMB DO-214AA Ordering Information SMBJ XX C A – XX – XX Packing Code TR70: 7” Tape & Reel, RoHS RG70: 7” Tape & Reel, RoHS& Halogen Free Factory Location Code Tolerance Code Bi-directional Code Stand-Off Voltage Code 600W Surface Mount Transient Voltage Suppressor Rev. G/AH www.taitroncomponents.com Page 6 of 7 600W Surface Mount Transient Voltage Suppressor SMBJ5.0A -440CA How to contact us USA HEADQUARTERS 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH 6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C. Tel: 886-2-2913-6238 Fax: 886-2-2913-6239 TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION SUITE 1503, METROBANK PLAZA, 1160 WEST YAN’AN ROAD, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-2302-5027 Rev. G/AH www.taitroncomponents.com Page 7 of 7