0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y 0603 Package True Green Flat Top LED Features Package in 8mm tape on 7” diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type RoHS compliance M1608 Descriptions This SMD series is much smaller than lead frame type components, thus enables smaller board size, higher packing density, reduced storage space, and small equipment. Besides, light weight makes them ideal for miniature applications. Applications Backlighting in dashboard and switch Telecommunication: indicator and backlighting in telephone and fax Flat backlight for LCD, switches and symbols General use Device Selection Guide Chip Part No. TSP1-TF1608H4-Q1R2Y Lens Color Material Emitted Color InGaN True Green TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON (800)-247-2232 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Water Clear Rev. A/PG Page 1 of 8 0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Value Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 95 mW Electrostatic Discharge (HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +90 °C Soldering Temperature Tsol Reflow Soldering: 260 °C for 10 seconds Hand Soldering: 350 °C for 3 seconds Electro-Optical Characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 72.0 ----- 180.0 mcd Viewing Angle 2θ1/2 ----- 120 ----- deg Peak Wavelength λp ----- 518.0 ----- nm Condition IF =5mA Dominant wavelength λd 520.0 ----- 535.0 nm Spectrum Radiation Bandwidth △λ ----- 20 ----- nm Forward Voltage VF 2.7 ----- 3.2 V Reverse Current IR ----- ----- 50 μA VR=5V Notes: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant wavelength: ±1.0nm 3. Tolerance of Forward Voltage: ±0.1V Rev. A/PG www.taitroncomponents.com Page 2 of 8 0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y Typical Electro-Optical Characteristics Curves (Ta=25°C) Forward Current vs. Forward Voltage Forward Current IF (mA) Relative Luminous Intensity (%) Spectrum Distribution Relative Intensity vs. Ambient Temperature Relative Intensity vs. Forward Current Ambient Temperature Ta (°C) Forward Current IF (mA) Radiation Diagram Forward Current IF (mA) Forward Current vs. Ambient Temperature Relative Luminous Intensity (%) Forward Voltage VF (V) Relative Luminous Intensity (%) Wavelength (nm) Ambient Temperature Ta (°C) Rev. A/PG www.taitroncomponents.com Page 3 of 8 0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y Package Dimensions (Unit=mm) Note: The tolerances unless mentioned is ±0.1mm, Unit = mm Rev. A/PG www.taitroncomponents.com Page 4 of 8 0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y Carrier Tape Dimensions (Unit=mm): Loaded quantity 3000pcs per reel Note: The tolerances unless mentioned is ±0.1mm. Moisture Resistant Packaging Rev. A/PG www.taitroncomponents.com Page 5 of 8 0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y Reel Dimensions (Unit=mm) Note: The tolerances unless mentioned is ±0.1mm. Rev. A/PG www.taitroncomponents.com Page 6 of 8 0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y Ordering Information TS P 1– T F 1608 H4 – Q1R2 Y- 92-TR70 Lead Free Tape & Reel 7=7˝ reel 0=3k per reel Factory Location Code Special Test Condition: IF=5mA Luminous Intensity Rank Code Height <=0.4mm Size Code in mm Flat Top True Green Color Convex PCB Type Taitron SMD LED Label Explanation CAT: Luminous Intensity Rank HUE: Dominant Wavelength Rank REF: Forward Voltage Rank Rev. A/PG www.taitroncomponents.com Page 7 of 8 0603 Package 0.3mm Height True Green Flat Top LED TSP1-TF1608H4-Q1R2Y Rank Combination Bin Range of Dominant Wavelength Groups Y Bin Min Max X 520.0 525.0 Y 525.0 530.0 Z 530.0 535.0 Unit Condition nm IF=5mA Bin Range of Luminous Intensity Bin Code Min Max Q1 72.0 90.0 Q2 90.0 112.0 R1 112.0 140.0 R2 140.0 180.0 Unit Condition mcd IF =5mA Bin Range of Forward Voltage Groups Q Bin Min Max 29 2.7 2.8 30 2.8 2.9 31 2.9 3.0 32 3.0 3.1 33 3.1 3.2 Unit Condition V IF=5mA Notes: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant wavelength: ±1.0nm 3. Tolerance of Forward Voltage: ±0.1V Rev. A/PG www.taitroncomponents.com Page 8 of 8