3mm Round Lamp LED TLH-B1R3-32EG 3mm Round Lamp LED Features • • • • Stand T-1 diameter package High brightness LED UV resistant epoxy RoHS compliance T-1 Descriptions • The series is specially designed for applications require higher brightness than that achievable with standard lamp. • The LED lamps are available with different colors, intensities, and epoxy colors, etc. Applications • Indoor/outdoor applications • Indicator applications • Back lighting Device Selection Guide Chip Part No. TLH-B1R3-32EG Lens Color Material Emitted Color InGaN Super Blue TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-247-2232 (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Water Clear Rev. A/CZ Page 1 of 7 3mm Round Lamp LED TLH-B1R3-32EG Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Value Unit Reverse Voltage VR 5 V Average Forward Current (Note 1&3) IF 25 mA Peak Forward Current (Note 2) IFP 100 mA Power Dissipation Pd 100 mW Operating Temperature (Note 3) Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C LED Junction Temperature TJ 125 °C Soldering Temperature (Note 4) Tsol 260 / 5 seconds °C Notes: 1. Design of heat dissipation should be considered. 2. Duty ratio=1/10, pulse width=0.1ms 3. The allowable operating current at different operation temperature, please take reference from Fig. 5 on page 3. 4. 3mm(0.118”) away from the epoxy. Electro-Optical Characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 1135 1750 ----- mcd Viewing Angle 2θ1/2 ----- 45 ----- deg Dominant wavelength λD 460 470 475 nm ----- 25 ----- nm Spectrum Radiation Bandwidth Δλ Forward Voltage VF 2.6 3.2 4.0 V Reverse Current IR ----- ----- 10 μA Condition IF =20mA VR=5V Notes: 5. Tolerance of Luminous Intensity: ±15% 6. Tolerance of Dominant Wavelength:±1nm 7. Tolerance of Forward Voltage: ±0.1V Rev. A/CZ www.taitroncomponents.com Page 2 of 7 3mm Round Lamp LED TLH-B1R3-32EG Typical Electro-Optical Characteristics Curves (Ta=25°C) Fig.2 Forward Current vs. Forward Voltage Forward Current IF (mA) Relative luminous intensity (%) Fig. 1 Spectrum Distribution Forward Voltage (V) Wavelength (nm) Fig.3 Luminous Intensity vs. Ambient Temperature Relative luminous intensity Relative luminous intensity (%) Fig.4 Luminous Intensity vs. Forward Current Forward Current IF (mA) Fig.5 Forward Current Derating Curve Fig.6 Radiation Diagram Forward Current IF (mA) Ambient Temperature Ta (°C) Ambient Temperature Ta (°C) Rev. A/CZ www.taitroncomponents.com Page 3 of 7 3mm Round Lamp LED TLH-B1R3-32EG Package Dimensions (In mm) Note: 1. All dimensions are in millimeter, tolerance: ±0.20mm. 2. Protruded resin under bottom surface of epoxy is 1.5mm max. 3. Lead spacing is measured where the leads emerge from the package. Packing Quantity Specification Packing Type PCS per Bag PCS Per Inner Box PCS Per Carton Bulk 500 10,000 20,000 Rev. A/CZ www.taitroncomponents.com Page 4 of 7 3mm Round Lamp LED TLH-B1R3-32EG Ordering Information TL H –B 1 R 3 – 32EG – 88– BL Lead Free Bag or Box Factory location code Frame Structure Code Size in mm Round Lamp Water Clear Super Blue Super Bright Taitron LED Lamp Rev. A/CZ www.taitroncomponents.com Page 5 of 7 3mm Round Lamp LED TLH-B1R3-32EG Rank Combination Bin Range of Luminous Intensity Bin Min. Max. 0S 1135 1590 0T 1590 2225 0U* 2225 3115 0V* 3115 4360 Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Unit Condition V IF =20mA Bin Range of Dominant Wavelength Bin Min. Max. BC 460 465 BD 465 470 BE 470 475 Bin Range of Forward Voltage Bin Min. Max. A 2.6 2.8 B 2.8 3.0 C 3.0 3.2 D 3.2 3.4 E 3.4 3.6 F 3.6 3.8 G 3.8 4.0 Notes: 1. 2. 3. 4. Tolerance of Luminous Intensity: ±15% Tolerance of Dominant Wavelength: ±1nm Tolerance of Forward Voltage: ±0.1V *Bin with less distribution Rev. A/CZ www.taitroncomponents.com Page 6 of 7 3mm Round Lamp LED TLH-B1R3-32EG How to contact us US HEADQUARTERS 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 247-2232 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA,1160 WEST YAN’AN ROAD, SUITE 1503, SHANGHAI,200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. A/CZ www.taitroncomponents.com Page 7 of 7