Microwave Dielectric Components All Series PDF

TOKEN
MICROWAVE
DIELECTRIC
COMPONENTS
Resonators Filters and Patch Antenna
Token Electronics Industry Co., Ltd.
Taiwan: No. 137, Sec. 1, Chung Shin Rd., Wu Ku Hsiang, Taipei Hsien, Taiwan, R.O.C
TEL: 886-2-2981 0109; FAX: 886-2-2988 7487
China:
12F, Zhongxing Industry Bld., Chuangye Rd., Nanshan District, Shenzhen, Guangdong
TEL: 86-755-2605 5363, 2605 5364; FAX: 86-755-2605 5365
http://www.token.com.tw
rfq token.com.tw
Product Index
Microwave Dielectric Components
Dielectric Resonators & Materials --------------------------------------------------------- 01
DR Coaxial Resonators Series -------------------------------------------------------------- 04
DF Filters Series ----------------------------------------------------------------------------------- 09
DA Patch Antenna Series ----------------------------------------------------------------------- 28
Notice: Specification Changed or Version Updated will be posted at irregular intervals.
All Updated and Final Specifications, Please Confirm with TOKEN ELECTRONICS
REPRESENITIVES.
:
rfq token.com.tw
:
http://www.token.com.tw
TOKEN
TE01δ Dielectric Resonators & Materials
Dielectric
Resonators Materials
Microwave Dielectric Resonator Material Is The
Cornerstone of Future Communications Technology
(TE01δ Mode)
Preview
Microwave dielectric ceramics as the key basic materials to modern communication technology, after Token
Electronics years of continuous research and development, using the latest technology to produce microwave
ceramics have achieved a variety of dielectric constant, quality factor Q of the new media ceramic materials,
and as a dielectric material application microwave frequencies of modern circuits, and modern electronic
communications in the filters, resonators, dielectric substrates, such as microwave dielectric waveguide circuit
components materials.
Comparing with microwave dielectric resonator made of Token’s ceramic materials and metal cavity resonator,
obviously, Token dielectric resonator features with a light weight, small volume, temperature coefficient of
stability, cheap, and so on. They have been widely used in satellite broadcast reception systems, PCS / PCN
filters, base stations, radar detectors, wireless mobile communications, telecommunications computer systems,
military facilities, microwave, modern medicine and many other areas.
Taking advantage of Token’s microwave dielectric ceramic materials for dielectric resonators and filters, with a
relatively high dielectric constant, can make the device smaller, space-saving design of the circuit; high quality
factor Q value and low dielectric loss, in order to ensure a good selection frequency characteristics and low
insertion loss of the device; the temperature coefficient is small, in order to ensure the thermal stability of the
device. Dielectric constant, quality factor Q, the temperature coefficient, these three parameters to evaluate the
important microwave dielectric ceramic material specifications and production.
Custom parts are available on request. Token will also produce devices outside these specifications to meet
specific customer requirements, please contact our sales for more information.
Features
- High Q Value
- Easy to control τ f
- Many kinds of material with various dielectric constants
Applications
- LNB
- Police Radar Detectors
- Dielectric Resonator Antennas
- LMDS/MMDS Wireless Cable TV
- Automobile Collision Avoidance Sensors
- PCS/PCN Filters, Duplexer & Combiners
- Cellular Base Station Filter, Duplexer & Combiners
Version 2010
http://www.token.com.tw/
rfq token.com.tw
01 of 30
TOKEN
TE01δ Dielectric Resonators & Materials
Available Range by Every Material
Material Series
Dielectric
Constant
Fo Q(1/tanδ)
TE21
TE30
TE36
TE45
TE80
TE90
19~22
29~30
35~37
44~46
79~81
89~91
6,000@10GHz
15,000@10GHz
10,000@4GHz
10,000@4GHz
7,000@1GHz
7,000@1GHz
Temperature
Coefficient
(PPM/°C)
0±3
0±6
0±3
0±6
0±6
0±6
Insulation
Resistance
(Ω-cm)
>1014
>1014
>1014
>1014
>1014
>1014
Application
Frequency
Range
Application
Range
Refer
Refer
Frequency
Chat
Frequency Chart
Frequency(GHz)
0.3
0.8
1.0
2.0
4.0
8.0
12
18
26.5
40
TE 21 series
TE 30 series
TE 36 series
TE 45 series
TE 80 series
TE 90 series
UHF
L-Band
S-Band
C-Band
X-Band Ku-Band
K-Band
Ka-Band
Ceramic Dielectric Microwave Components Application Notice
1. Aging :
Ceramics aging is small. Microwave Dielectric Ceramics any change in resonant frequency can be
attributed to changes in measurement cavity or measurement techniques.
2. Water Absorbing :
Ceramics absorb water is not obvious, but the moisture condensation in the ceramic microwave
dielectric resonator on the surface will affect the Qu. But Qu will be self-healing, when the water dried,
For example, Dielectric resonator in the filter operation of the self-heating.
3. Cleanliness :
Qu degradation of the oil may be due to a finger, pencil lead note, tape, adhesives, or other
contaminants. Cleanliness of the dielectric ceramics is important.
02 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
TE01δ Dielectric Resonators & Materials
4. Dielectric Constant :
In fact, the microwave dielectric ceramics of the dielectric constant is not fixed. It varies with the
additives added, and used to determine the temperature coefficient ceramics. The dielectric constant of
each batch is slightly different and it changes slightly with temperature changes. Token compensates
for these effects and provide dielectric resonators size to frequency, and offers custom temperature
coefficient on request.
5. Dielectric loss factor tanδ & Qu :
Dielectric loss factor and quality factor of the relationship, such as Quality Factor (Q = 1 / tanδ),
Dielectric microwave materials are commonly assigned a loss tangent to permit an estimate of signal
losses. Ceramic dielectric resonator is usually run on a specific frequency, a specific geometric shape,
it can directly measure its size, with no-load quality factor Qu, Qu is an important basic resonator
parameters (more useful than the loss tangent), particularly suitable filter and oscillator applications.
6. Smooth Surfaces :
Ceramic hard surface contact, it is prone to very small fragments. Most of the small fragments will not
affect the electrical properties of dielectric ceramics. Ceramic surface roughness is not particularly
important factor. Ceramic dielectric resonator itself does not current exist only in the form of stored
energy from the field. Smooth surfaces are desirable from the standpoint of avoiding trapped
contaminants.
7. Thermal Shock :
Microwave dielectric ceramics in the temperature exceeds 1200° in furnace to burn out, they can be
more resistant than the temperature of electronic devices, far beyond the welding temperature.
However, the thermal conduction velocity of dielectric ceramics is much slower than the metal. Large
temperature gradient through the ceramic device, because of uneven expansion, could lead to device
failure, which is called thermal shock. Suddenly applied heat in the thick ceramic devices will lead to
broken ceramics.
8. Adhesives :
Adhesives to install ceramic dielectric resonators must be carefully selected. Adhesives will reduce
the dielectric ceramics Q u, The right adhesives can reduce Qu to a minimum, while ensuring the
adhesion strength.
How to Order
TE
36
10
A
S





 Dielectric Coaxial Resonators
 Construction
 Dielectric Constant
Code
S
W
 Center Frequency (GHz)
 Configuration
Code
A
B
Construction
Support
Without support
Configuration
With hole
Without hole
Back to 1st Page - Dielectric Coaxial Resonators TE01δ Mode - TE
Version 2010
http://www.token.com.tw/
rfq token.com.tw
03 of 30
TOKEN
DR Dielectric Coaxial Ceramic Resonators
Dielectric Coaxial
Ceramic Resonators
Token Ceramic Coaxial Resonators (DR)
Is The Cornerstone of RF Microwave Communications
Preview
Dielectric ceramic resonator is a kind of microwave components, also known as coaxial resonator, Token
electronics manufacturing dielectric resonator (cylindrical, ring), coaxial resonator (rectangular cavity, cylindrical
cavity, coaxial cavity resonator), microwave resonator, etc. It is made high-Q dielectric ceramics, temperature
coefficient is good, mainly used in microwave oscillators and filters.
Dielectric resonator size and dielectric material is inversely proportional to the square root of the dielectric
constant, dielectric materials, dielectric constant the greater the required dielectric ceramic block the smaller, thus
the smaller the resonator size. Another important parameter is the insertion loss, low dielectric loss microwave
dielectric materials, dielectric filters that affect the insertion loss of a major factor. Microwave dielectric Q value
and dielectric loss is inversely proportional to the relationship. Q value is greater the lower the filter insertion
loss.
Therefore, the microwave dielectric ceramic materials of high dielectric constant is conducive to the
miniaturization of microwave dielectric filters, can filter with the microwave tube, a microstrip line realization of
microwave hybrid integrated circuit, so that the device dimensions to mm order of magnitude, the price is also
much lower than the metallic cavity.
The coaxial resonator impedance used in TEM mode is direct function of its dimensions and of the dielectric
material permittivity. Token coaxial ceramic resonators provide the customers with high Q higher parellel
resonant impedance and better temperature characteristics than inductor coils and associated lumped constant
elements used in RF amplifiers and oscillators circuits. According to dielectric resonator frequency stabilization
mechanism, using dielectric resonator stabilized FET oscillator frequency (also referred to DRO) can be
classified into 4 types, namely, reflective, band-reject type, transmission type and feedback type.
Coaxial Resonator named by the internal and external, between the inner and outer conductor filling a variety
of dielectric ceramics to be dielectric ceramic coaxial resonator name. It is longer than the length of the unfilled
resonator is much smaller. Coaxial resonator with two ports, depending on port different boundary conditions,
in accordance with the basic structure of the resonator is divided into three types: half-wavelength type, quarterwavelength type, and capacitive load type, each structure each with distinct characteristics.
04 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
DR Dielectric Coaxial Ceramic Resonators
Token DR series features with small size, high temperature stability characteristics. Indirectly, DR
series is suitable for a variety of microwave communications equipment, particularly suitable for PCS
/ PCN filters, base stations, radar detectors, satellite broadcast reception systems, military microwave
facilities. Comply with RoHS standards.
Custom parts are available on request. Token will also produce devices outside these specifications to
meet specific customer requirements,
please contact our sales for more information.
Features
- High quality factor
- High dielectric constant
- Low temperature coefficient
- Wide range of resonant frequency
Applications
- Filter and duplexer
- Oscillators (DRO/VCO)
- CDMA/PCS/WLL/IMT2000
- Wireless headphone, wireless security system
- 900MHz, 1.8GHz, 2.4GHz, 5.8GHz wireless phone
Version 2010
http://www.token.com.tw/
rfq token.com.tw
05 of 30
TOKEN
DR Dielectric Coaxial Ceramic Resonators
Dimensions
A
W
L
B
T
C
W
Part Number
W(O/D)
D120
12.0±0.2
D100
D080
10.0±0.2
8.0±0.2
D060
6.0±0.2
D050
5.0±0.2
D040
4.0±0.1
D030
D020
3.0±0.1
2.1±0.1
06 of 30
L: Length of resonator
Unit: mm
A(I/D)
 Φ4.0±0.2
B
without tab
 Φ3.55±0.2
1.5
 Φ3.3±0.2
 Φ2.7±0.2
 Φ2.5±0.2
 Φ2.2±0.2
 Φ2.0±0.2
 Φ1.8±0.2
 Φ1.5±0.2
 Φ1.8±0.1
 Φ1.5±0.1
 Φ1.2±0.1
 Φ1.0±0.1
 Φ0.6±0.1
1.3
1.3
without tab
without tab
1.2
1.0
1.0
0.8
without tab
without tab
0.7
0.5
http://www.token.com.tw/
rfq token.com.tw
C
T
3.2
1.0
3.0
2.6
1.0
0.7
2.4
0.7
2.2
0.6
1.8
0.6
1.5
1.2
0.5
0.5
Version 2010
TOKEN
DR Dielectric Coaxial Ceramic Resonators
Available Range of TEM Mode
Material
Dielectric
Constant
Tf [1]
Type
Characteristic
Impedance (Ω)
15 17
A Series
B Series
21±1
36±1
0±10
0±10
D100
16
D080
15
D060
12 14 15
D050
14 17
D040
11 14 17
D030
D020
15
17
D120
12 13
D100
12
D080
12
D060
10 11 12
D050
11 13
D040
9 11 13
D030
D020
12
13
Wave
Length
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/4
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/4
Frequency
Range (MHz)
800~1300
1600~2700
800~1300
1600~3200
1000~3200
2000~3000
1000~2700
2000~3000
1300~3000
2500~4000
1300~4000
2500~4000
1900~4000
2800~5000
600~1000
1200~2400
600~1200
1200~2400
800~1500
1600~3000
800~1800
1600~3500
800~1800
1600~3500
1000~2700
2000~4800
1300~3000
1300~3000
Q [2]
(min)
800
1000
700
800
650
700
550
600
450
500
380
400
320
250
700
900
600
800
500
700
450
550
380
450
320
400
220
220
Continued on the following page.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
07 of 30
TOKEN
DR Dielectric Coaxial Ceramic Resonators
Continued from the preceding page.
Material
Dielectric
Constant
C Series
90±2
Tf [1]
Characteristic
Impedance (Ω)
Type
0±10
D120
7 8
D100
7
D080
7
D060
6 7 7
D050
7 8
D040
6 7 8
D030
D020
7
8
Wave
Length
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/2
λ/4
λ/4
Frequency
Range (MHz)
400~800
800~1500
600~800
1200~2400
440~1000
1000~1500
440~1300
1000~2200
500~1800
1000~3000
900~1600
2000~4800
900~1600
900~1600
Q [2]
(min)
650
700
550
650
450
550
400
470
380
450
200
300
250
150
Note:1.Frequency stability of temperature.
2.Q value depends on lower limit of frequency range.
How to Order
DR
30
A
1
W4
2533
T







 Dielectric Resonators
 Wave Length
Code
W2
W4
 Dimension
 Material
 Center Frequency (MHz)
 Impedance
Code
1
2
3
Wave Length
λ/2
λ/4
 Configuration
Impedance



Code
T
N
Configuration
tab
without tab
Back to 1st Page - Dielectric Resonators TEM Mode - DR
08 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
DF-A Dielectric Filters
Dielectric Filters
(DF-A)
Token Offers Dielectric RF Filters
for Telecoms (DF-A)
Preview
Token has extended the capabilities of its
filter product line with the introduction of a
new range of dielectric microwave filters to
the available frequency range up to 5.8GHz.
Token designs and manufactures custom
electronic filters for defence,
telecommunications and similar application
increasing the range of products available to
customers.
Two block-type dielectric RF filters for
telecoms basestation applications have been
added to Token’s DF range. The filters have been designed for cellular basestation applications that use a digital
pre-distortion amplifier (DPD), as they feature a wide pass band and flat ripple performance, which are required
for DPD PA design.
Applications also include RF and microwave communications such as GSM, 3G, GPS, satellite and TV
transmission, wireless security systems, radar, CT1, CT2, 900MHz, 1.8GHz, 2.4GHz, 5.8GHz Cordless Phone,
wireless earphone, wireless microphone, aerospace and military.
The DF-A filter’s small size (8.8 x 7.3 x 3.6 mm) means they require more less mounting space compared to
Token’s previous generation of filters for this application. The filters’ highly sophisticated multi-pole design
ensures high attenuation and good selectivity. Both the two members of the DF series have a ripple of 1.0 dB
max.
In addition, Token enhances custom design capabilities for specialist applications. Our customers will benefit
from the additional frequency ranges now available and from the excellent quality and lower costs achievable
Custom parts are available on request. Token will also produce devices outside these specifications to meet
specific customer requirements, please contact our sales for more information.
Applications
- Suitable for surface mount and reflow soldering.
- Excellent mechanical structure and temperature stability.
- Good selectivity, low insertion loss for using high Q-value resonators.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
09 of 30
TOKEN
DF-A Dielectric Filters
3.2
4.4
0.6
DF903
8.8
1.3
Dimensions (Unit: mm)
3.6
7.3
Unit: mm Tol: ±0.2
Typical Specifications
Part No.
DF457S30A
DF522S10A
DF683S30A
DF740S30A
DF864S10A
DF915S25A
DF903S6A
DF927S6A
DF1890S80A
DF2403S20A
DF2475S20A
Center
Frequency
(MHz)
457
522
683
740
864
915
903
927
1890
2403
2475
Band Width
(MHz)
fo±15
fo±5
fo±15
fo±15
fo±5
fo±12.5
fo±3
fo±3
fo±40
fo±10
fo±10
Insertion
Loss
(dB) max.
3.0
3.0
2.5
2.0
2.5
2.0
3.5
3.5
1.5
3.0
3.0
Ripple in
Band Width
(dB) max.
1.0
0.5
1.0
0.5
0.5
1.0
0.5
0.5
1.0
0.5
0.5
V.S.W.R
max.
Attenuation
(dB) min. (MHz)
2.0
1.6
2.0
1.8
1.5
2.0
1.5
1.5
2.0
1.5
1.5
17 at fo+50; 30 at fo-50
23 at fo+40; 40 at fo-40
20 at fo+64; 30 at fo-64
14 at fo+64; 20 at fo-64
15 at fo+24; 17 at fo-24
20 at fo+100; 35 at fo-100
32 at fo+24
32 at fo-24
15 at fo+200; 35 at fo-200
35 at fo+75
35 at fo-75
Typical Characteristic
Δ
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection
SWR
0.2/ Ref
1.000
3
dB
10
1
1
2
2
-10
Meas 1:Mkr1 915.000 MHz
-1.731dB
Meas 2:Mkr1 915.000 MHz
1.289
-20
-30
2
-40
-50
-60
1
3
1
-70
2:
Center 915.000MHZ
Span 400.000MHZ
Continued on the following page.
10 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
DF-A Dielectric Filters
Continued from the preceding page.
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection
SWR
0.2/ Ref
1.000
dB
2
10
2
3
1
1:
Δ
Δ
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection SWR 0.2/ Ref
1.000
-10
1
1:
-10
Meas 1:Mkr1 907.000 MHz
-2.381dB
Meas 2:Mkr1 904.000 MHz
1.153
-20
3
-30
1
-40
-30
3
2
-40
2
-50
1
-50
1
-60
1
-60
-70
2:
2
2
10
Meas 1:Mkr1 927.000 MHz
-3.296dB
Meas 2:Mkr1 927.000 MHz
1.302
-20
3
dB
-70
Center 927.000MHZ
Span 200.000MHZ
2:
Center 904.000MHZ
Span 300.000MHZ
How to Order
DF
864
S
10
A





 Dielectric Filter
 Center Frequency
 Connect Type :
Code
S
Size
SMD type
 Bandwidth
 Size
Code
A
B
C
D
Size
7.3*3.6 mm
6.0*3.0 mm
4.5*2.0 mm
3.6*1.8 mm
Back to 1st Page - Dielectric Filters DF-A
Version 2010
http://www.token.com.tw/
rfq token.com.tw
11 of 30
TOKEN
DF-B Dielectric Filters
Dielectric Filters
(DF-B)
Token Dielectric Filter (DF-B)
has a Ripple in Band Width (dB) 0.5 max.
Preview
Token Dielectric Filter (DF-B) manufactures with a fine-grained, high density, high purity dielectric material to
keep the best performance with a ripple in band width (dB) 0.5 max.
The (DF-B) filter’s small size (8.5 x 6.0 x 3.0 mm) means they require more less mounting space. Available
Center Frequency 650 MHz to 916 MHz with V.S.W.R 1.5 max., insertion loss 2.0 ~ 5.0 (dB) max.
RF dielectric filters are mounted in a surface mount package which assures mechanical stability and excellent
lead coplanarity. RF filters can be customed designs and tighter tolerances available on request.
Products conform to the RoHS directive. Application of specific designs also available including different
Dielectric values and Q specifications adjusted to frequency requirements.
12 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
DF-B Dielectric Filters
6.0
0.6
DF959
8.5
1.3
Dimensions (Unit: mm)
2.2
3.4
3.0
Unit: mm Tol: ±0.2
Typical Specifications
Part No.
DF650S30B
DF700S20B
DF710S08B
DF746S20B
DF758S16B
DF794S20B
DF800S08B
DF836S20B
DF850S08B
DF863S22B
DF875S24B
DF903S09B
DF906S20B
DF916S30B
Center
Frequency
(MHz)
650
700
710
746
758
794
800
836
850
863
875
903
906
916
Band Width
(MHz)
fo±15
fo±10
fo±4
fo±10
fo±8
fo±10
fo±4
fo±10
fo±4
fo±11
fo±12
fo±4.5
fo±10
fo±15
Insertion
Loss
(dB)max.
2.5
2.5
5.0
2.5
2.5
2.5
5.0
2.5
5.0
2.0
2.3
3.5
2.5
2.7
Ripple in
Band Width
(dB)max.
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
V.S.W.R
max.
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
Attenuation
(dB)min.(MHz)
19 at fo±64
19 at fo±64
35 at fo+100; 28 at fo+50
12 at fo-20
19 at fo±64
19 at fo±64
35 at fo+100; 28 at fo+50
19 at fo+52
30 at fo+100; 40 at fo-200
50 at fo-90; 20 at fo+90
30 at fo-70
34 at fo-64; 41 at fo+64
19 at fo±64
20.5 at fo±70
Typical Characteristic
Δ
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection
SWR
0.2/ Ref
1.000
3
dB
10
2
1
1
-10
2
Meas 1:Mkr1 915.000 MHz
-1.731dB
Meas 2:Mkr1 915.000 MHz
1.289
-20
-30
2
-40
-50
-60
1
3
1
-70
2:
Version 2010
Center 915.000MHZ
http://www.token.com.tw/
Span 400.000MHZ
rfq token.com.tw
13 of 30
TOKEN
DF-B Dielectric Filters
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection
SWR
0.2/ Ref
1.000
dB
2
10
2
3
1
1:
Δ
Δ
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection SWR 0.2/ Ref
1.000
-10
1
1:
-10
1
-40
Meas 1:Mkr1 907.000 MHz
-2.381dB
Meas 2:Mkr1 904.000 MHz
1.153
-30
3
2
-40
2
-50
1
-50
1
-60
2
-20
3
-30
1
-60
-70
2:
2
10
Meas 1:Mkr1 927.000 MHz
-3.296dB
Meas 2:Mkr1 927.000 MHz
1.302
-20
3
dB
-70
Center 927.000MHZ
Span 200.000MHZ
2:
Center 904.000MHZ
Span 300.000MHZ
How to Order
DF
836
S
20
B





 Dielectric Filter
 Center Frequency
 Connect Type :
Code
S
Size
SMD type
 Bandwidth
 Size
Code
A
B
C
D
Size
7.3*3.6 mm
6.0*3.0 mm
4.5*2.0 mm
3.6*1.8 mm
Back to 1st Page - Dielectric Filters DF-B
14 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
DF-C/D Dielectric Filters
Dielectric Filters
(DF-C/D)
Token Two Block-Type Dielectric Filters (DF-C/D)
range up to 5.8GHz
Preview
Token two block-type dielectric RF filters have been designed for cellular basestation applications that use a
digital pre-distortion amplifier (DPD), as they feature a wide pass band and flat ripple performance, which are
required for DPD PA design.
Applications also include RF and microwave communications such as satellite and TV transmission, wireless
security systems, radar, GSM, 3G, GPS, CT1, CT2, 900MHz, 1.8GHz, 2.4GHz, 5.8GHz Cordless Phone,
wireless earphone, wireless microphone, aerospace and military.
The (DF-C/D) filter’s small size (4.5 x 4.5 x 2.0 mm) means they require more less mounting space with a ripple
of 1.0 dB max and insertion loss 2.0 (dB) max. Center frequency range from 1575 MHz to 5800 MHz with
V.S.W.R 2.0 max.
The surface mount RF Dielectric Filters (DF-C/D) conform to the RoHS directive and package is suitable for
automatic pick and place equipment which assures mechanical stability and excellent lead coplanarity. Customed
designs and tighter tolerances are available on request. Application of specific designs also available including
different Dielectric values and Q specifications adjusted to frequency requirements.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
15 of 30
TOKEN
DF-C/D Dielectric Filters
1.1
2.1
Dimensions (Unit: mm)
4.5
1.2
4.5
DF2452
2.2
2.0
Unit: mm Tol: ±0.2
Typical Specifications
Center
Frequency
(MHz)
Band Width
(MHz)
Insertion
Loss
(dB)max.
Ripple in
Band Width
(dB)max.
V.S.W.R
max.
DF1575S40C
1575
fo±20
2.0
0.7
2.0
DF1855S70C
1855
fo±35
2.0
0.7
2.0
DF1890S80C
1890
fo±40
2.0
0.7
2.0
DF1950S90C
1950
fo±45
3.0
0.7
2.0
DF2332S100C
2332
fo±50
2.5
0.7
2.0
DF2450S100C
2450
fo±50
2.0
0.7
2.0
DF3066S170D
3066
fo±85
2.0
1.0
2.0
DF3480S120D
3480
fo±60
2.0
1.0
2.0
DF3650S150D
3650
fo±75
2.0
1.0
2.0
DF4880S160D
4880
fo±80
2.0
1.0
2.0
DF5800S200D
5800
fo±100
2.0
1.0
2.0
Part No.
16 of 30
http://www.token.com.tw/
rfq token.com.tw
Attenuation
(dB)min.(MHz)
20 at fo-100;
18 at fo+100
20 at fo+300;
20 at fo-300
15 at fo+250;
35 at fo-250
45 at fo+975;
45 at fo-975
25 at fo+500;
40 at fo-500
12 at fo+250;
15 at fo-250
10 at fo+300;
15 at fo-300
10 at fo+500;
20 at fo-500
15 at fo+750;
25 at fo-750
5 at fo+350;
15 at fo-350
5 at fo+400;
15 at fo-400
Version 2010
TOKEN
DF-C/D Dielectric Filters
Typical Characteristic
►1:Transmission Log Mag 10.0dB/Ref
2:Refection
SWR
0.2/ Ref
dB
10
1
Meas 1:Mkr1 915.000 MHz
-1.739dB
Meas 2:Mkr1 915.000 MHz
-17.998dB
3
-10
2
1
Δ
Δ
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection
SWR
0.2/ Ref
-1.000
dB
3
10
2
-10
-20
2
2
1
1:
0.00dB
-1.000
Meas 1:Mkr1 915.000 MHz
-1.731dB
Meas 2:Mkr1 915.000 MHz
1.289dB
-20
-30
-30
2
-40
-40
1
-50
-50
3
-60
-60
-70
-70
Center 915.000MHZ
2
1
3
2:
Span 400.000MHZ
1
Span 400.000MHZ
How to Order
DF
1950
S
90
C





 Dielectric Filter
 Center Frequency
 Connect Type :
Code
S
Size
SMD type
 Bandwidth
 Size
Code
A
B
C
D
Size
7.3*3.6 mm
6.0*3.0 mm
4.5*2.0 mm
3.6*1.8 mm
Back to 1st Page - Dielectric Filters DF-C/D
Version 2010
http://www.token.com.tw/
rfq token.com.tw
17 of 30
TOKEN
DF 3 or Multi-Pole Dielectric Filters
Dielectric Filters
(DF 3 or Multi-Pole)
Dielectric Filters (DF) 3 or multi-pole range up to 5.8GHz
Preview
The dielectric filter technology based on high Dielectric Constant (K) ceramic material has been contributing
great size reduction of a mobile telecommunication equipment, especially cellular handset and base station. That
is superior in electrical performances and reliability. Furthermore it has good mass productivity and low cost.
Token (DF) dielectric filters’ highly sophisticated multi-pole design ensures high attenuation and good selectivity.
The (DF) multi-pole series filter’s small size (8.6 x 9.0 x 3.0 mm) means they require more less mounting space
with a ripple of 1.0 dB max. Insertion loss is from 2.0 ~ 3.5 (dB) max. Center frequency range from 860 MHz to
5800 MHz with V.S.W.R 2.0 max.
Coaxial dielectric filter is the most popular and commercially successful technology. Token takes this advance
technology to manufacture coaxial type duplexer. This features high unloaded Q, excellent high power
performance, flexible design capability, size reduction, low profile, and lighter weight.
Surface mount multi-pole (DF) serise RF filter package is suitable for automatic pick and place equipment which
assures mechanical stability and excellent lead coplanarity. Custom designs and tighter tolerances are available
on request. Products conform to the RoHS directive.
Token will also produce devices outside these specifications to meet specific customer requirements, please
contact our sales for more information.
Features
- MBP 42R Series.
- Murata DFC Series Compatible.
- Application for CT1, CT2, 900MH, 1.8GHz, 2.4G WLL Cordless phone.
18 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
DF 3 or Multi-Pole Dielectric Filters
4.5
L = 9.0
DF815R
1.3
2.6
Dimensions (Unit: mm)
5.8
W = 8.6
H = 3.0
Unit: mm Tol: ±0.2
Typical Specifications
Center
Frequency
fo(MHz)
Band Width
(MHz)
Insertion
Loss
(dB) max.
Ripple
in Band Width
(dB)max.
V.S.W.R
max.
Attenuation
(dB) min.(MHz)
DF43R860S20A
860
fo±10
3.0
0.8
2.0
-25 at fo+30
-22 at fo-30
DF43R1855S10A
1855
fo±5
3.5
1.0
2.0
-30 at fo+100
-28 at fo-100
DF43R950S20A
950
fo±10
3.5
0.8
2.0
-40 at fo+30
-35 at fo-30
DF44R3120S60A
3120
fo±30
3.0
1.0
1.5
-58 at fo+355
-55 at fo-375
DF45R1120S40A
1120
fo±20
2.5
1.0
2.0
-50 at fo+50
-50 at fo-50
DF33R815S20B
815
fo±10
2.5
0.8
2.0
-18 at fo+40
-25 at fo-40
DF33R1880S50B
1880
fo±25
3.5
1.0
2.0
-40 at fo+150
-40 at fo-150
DF23R1480S40C
1480
fo±20
2.5
1.0
2.0
-20 at fo+150
-20 at fo-150
DF23R1960S60C
1960
fo±30
2.0
1.0
2.0
-20 at fo+200
-20 at fo-200
DF23R2480S30C
2480
fo±15
2.5
1.0
2.0
-20 at fo+250
-20 at fo-250
DF23R5800S200D
5800
fo±100
2.0
1.0
2.0
-5 at fo+400
-15 at fo-400
Part No.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
19 of 30
TOKEN
DF 3 or Multi-Pole Dielectric Filters
Typical Characteristic
►1:Tran smission Log Mag 10.0dB/Ref
2:Refection
SWR
0.2/ Ref
dB
10
1
2
1
-10
Δ
Δ
►1:Transmission Log Mag 10.0dB/Ref 0.00dB
2:Refection
Log Mag 10.0/ Ref -1.00dB
Meas 1:Mkr1 860.000 MHz
-3.280dB
Meas 2:Mkr1 860.000 MHz
-11.086dB
10
2
3
-10
-40
-50
-50
-60
Meas 1:Mkr1 860.000 MHz
-3.281dB
Meas 2:Mkr1 860.000 MHz
1.719dB
2
-30
-40
1
1
-60
1
-70
2
3
-20
2
-30
3
1
1:
3
-20
2
dB
0.00dB
1.000
-70
Center 860.000MHZ
2:
Span 200.000MHZ
Center 860.000MHZ
Span 200.000MHZ
How to Order
DF
3
3R
815
S
20
B







 Dielectric Filter
 Connect type
Code
S
 Thickness
Code
4
3
2
Thickness
3.8mm
3.0mm
2.0mm
Connect type
SMD type
 Band width (MHz)
 Size(WH)(mm)
Code
A
B
C
 Number of Resonator
 Center Frequency (MHz)
Size(WH)(mm)
11.83.8
8.63.0
5.82.0
Back to 1st Page - Dielectric Filters (DF) 3 or More Poles
20 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
BP-R Dielectric Bandpass Filters
Dielectric
Bandpass Filters
(BP-R)
Dielectric Bandpass Filters (BP-R)
Have a Low Ripple In Bandwidth 0.5 (dB) Max.
Preview
Dielectric bandpass filters, known as ceramic bandpass filters, dielectric ceramic filters, or microwave ceramic
filters in standard resonator sizes. Token BP-R series center frequency range is from 915 MHz to 1220 MHz
basic rules of ceramic band-pass filters and diplexer. Insertion loss is from 2.0 ~ 3.5 (dB) max and a ripple in
bandwidth 0.5 (dB) max.
The higher the Q-factor of a resonators/band pass filters, the better electrical performance for insertion loss. The
more dielectric resonators combined together for a band pass ceramic filters, the better rejection, attenuation, and
stopband will be. Determinant factor for Insertion Loss Q factor of a resonator, the bandwidth of a filter, and the
number of resonators Determinant factor for Attenuation/rejection The number of resonators, connection type of
resonators.
Token RF ceramic bandpass filters can be customed designs and tighter tolerances available on request. Token
BP-R series are primarily designed for high dielectric constant lines and conform to the RoHS directive.
The (BP-R) series feeature with high permittivity, high dielectric constants, extremely temperature stability and
high Q that enables the design of stable microwave oscillators and filters. High dielectric constant (K) materials
and associated products are also available for custom application requirements.
Please contact our sales for more information.
Features
- Low insertion loss.
- Size small and light.
- High frequency selectivity.
- Temperature compensated.
Applications
- Trunked radio system.
- Cellular, cordless phone.
- Military affairs, Base station.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
21 of 30
TOKEN
BP-R Dielectric Bandpass Filters
Dimensions (Unit: mm)
4.0
11.0+0.5
8.3
0.8
24.0
8.0
30.0
7.6
31.0
24.0
34.0
Typical Specifications
Part Number
BP63R915-01
BP64R881-02
BP84R650-01
BP84R1200-03
BP74R959-02
BP75R836-01
BP76R1220-02
Center Frequency Band Width Insertion Loss Ripple in Band V.S.W.R
Attenuation
fo(MHz)
(MHz)
(dB)max.
Width(dB)max.
max.
(dB)min.(MHz)
915
fo±5
2.5
0.5
1.5
45 at fo±100
881
fo±10
2.0
0.5
2.0
60 at fo±100
650
fo±5
2.5
0.5
1.5
70 at fo ±55
1200
fo±15
2.0
0.5
2.0
70 at fo ±60
959
fo±10
2.0
0.5
2.0
70 at fo ±80
836
fo±5
3.5
0.5
1.5
80 at fo ±50
1220
fo±10
2.5
0.5
2.0
80 at fo ±50
How to Order
BP
3
4R
1765
01





 Band Pass Filter
 Thickness
 Number of Resonator
 Center Frequency (MHz)
 BandWidth
Code
01
02
03
BandWidth
10MHz
20MHz
30MHz
Back to 1st Page - Dielectric Band Pass Filters - BP-R
22 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
LJ Dielectric Filters
Dielectric Filters (LJ)
Low Insertion Loss Type Dielectric Filters (LJ) Series
Preview
Token electronics manufacturing microwave dielectric filters, multi-layer filters, cavity filters, band-pass filter,
military filters, high-frequency filters and so on, using high dielectric coefficient material and dielectric ceramics
to meet specific design requirements, in line with RoHS standard.
Surface mount RF dielectric filters are mounted in a through hole package which assures mechanical stability
and excellent lead coplanarity. RF dielectric filters can be customed designs and tighter tolerances available on
request. Products conform to the RoHS directive and Lead-free.
LJ Series with a stable temperature coefficient, small size, high stability, low insertion loss, good weldability.
Dielectric band-pass filter for use in microwave communications, data transmission, radar, electronic warfare,
military, aerospace and other fields.
Features
- Low insertion loss.
- Temperature compensated.
- High frequency selectivity.
- small and light.
Applications
- Base station.
- Military affairs.
- Trunked radio system.
- Cellular, Cordless phone.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
23 of 30
TOKEN
LJ Dielectric Filters
Dimensions (Unit: mm)
30.0
11.0
8.0
2-0.8
21.0
Typical Specifications
Part No.
LJ900-C-A
LJ1200-C-B
LJ950-D-B
LJ1250-D-B
Center Frequency Band Width Insertion Loss Ripple in Band V.S.W.R
Attenuation
fo(MHz)
(MHz)
(dB) max.
Width(dB)max.
max.
(dB) min.(MHz)
900
fo±10
2.5
0.5
1.5
50 at fo±100
1200
fo±15
2.0
0.8
2.0
50 at fo±110
950
fo±10
2.5
0.5
1.5
60 at fo ±100
1250
fo±15
2.0
0.8
2.0
60 at fo ±110
Typical Characteristic
SWR
0.2/
1
Ref 1.000
2:Refection
Δ
Δ
2:Refection
Meas1.3:Mkr1 0.000 MHz
0.000dB
Meas2:Mkr1 1067.5.00MHz
1.210dB
SWR
Ref
0.00dB
Meas 1:Mkr1 0.000 MHz
0.000dB
Meas 2:Mkr1 1067.5.00 MHz
-20.456dB
1
dB
10
2
5.0/
-10
-20
-30
-40
2
-50
1
3
2
3
-60
-70
Center 1 067.500MHZ
Span 300.000MHZ
Center 1 067.500MHZ
Span 300.000MHZ
How to Order
DF
3


-
3R
815


 Center Frequency (MHz)
 Band Width
 Dielectric Filter
 Number of Resonator
Code
C
D
Number of Resonator
3
4
Code
A
B
Band Width
10 MHz
20 MHz
Back to 1st Page - Dielectric Filters - LJ
24 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
BP-S BandPass Filters
Dielectric
BandPass Filters
(BP-S)
Token (BP-S) Series For
High Performance Microwave Filters and Oscillators
Preview
BP-S series of microwave dielectric bandpass filter series with a high dielectric constant, is the best microwave
filters and oscillators.
Token Ceramic Dielectric material has a high dielectric constant and high Q values, and high temperature
stability, especially for the design and stability of the microwave oscillations and filtering. German bond
ceramic media for CT1, CT2, 900MHz, 1.8GHz, 2.4GHz, 5.8GHz cordless phones, wireless headsets, wireless
microphones.
Token electronics manufacturing microwave dielectric filters, multi-layer filters, cavity filters, band-pass filter,
military filters, and high-frequency filters, using low insertion loss, high Q, high frequency selectivity, and
microwave dielectric ceramics to meet specific design requirements. Comply with RoHS standards.
BP-S series of dielectric filters and stable temperature coefficient, small size and high stability, low insertion loss
and good weldability. Dielectric band-pass filter for use in microwave communications, data transmission, radar,
electronic warfare, military, aerospace and other fields.
Custom parts are available on request. Token will also produce devices outside these specifications to meet
specific customer requirements, please contact our sales for more information.
Features
- Low insertion loss.
- High frequency selectivity.
- Temperature compensated.
- SMD Package, small and light.
Applications
- Base station.
- Military affairs.
- Trunked radio system.
- Cellular, Cordless phone.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
25 of 30
TOKEN
BP-S BandPass Filters
Dimensions (Unit: mm)
3.9
BP1960S
13.0
4.5
TOP
SIDE
1.7
5
3.6
2 0.6
12.0
11
5
8.8
10
11
Unit:mm
BOTTOM
Tol:±0.2
Typical Specifications
Part No.
BP33R881S30A
BP64R836S30A
BP64R881S30A
BP34R1765S30A
BP34R1855S30A
BP55R1750S60A
BP55R1765S10A
BP55R1765S30A
BP55R1855S10A
BP55R1855S30A
BP66R1755S10A
BP66R1845S10A
BP34R2315S30A
BP34R2385S30A
BP34R2442S80A
BP64R409S10A
BP64R426S10A
BP66R1410S30A
BP86R1474S10A
BP34R1880S60A
BP34R1960S60A
BP34R1950S60A
BP34R2140S60A
26 of 30
Center Frequency Band Width Insertion Loss Ripple in Band V.S.W.R
Attenuation
fo(MHz)
(MHz)
(dB)max.
Width(dB)max.
max.
(dB)min.(MHz)
881.5
fo±12.5
2.5
1.0
1.8
53 at fo±779
836.5
fo±15
3.0
1.2
1.7
18 at fo±32.5
881.5
fo±15
3.0
1.2
1.7
18 at fo ±32.5
1765
fo±15
3.5
1.0
1.8
30 at fo ±90
1855
fo±15
3.5
1.0
1.8
30 at fo ±90
1750
fo±30
3.0
1.5
1.7
30 at fo ±1810
1765
fo±5
5.0
1.0
1.8
20 at fo ±20
1765
fo±15
3.0
1.3
1.6
40 at fo ±80
1855
fo±5
5.0
1.0
1.8
20 at fo ±20
1855
fo±15
3.8
1.3
1.6
40 at fo ±80
1755
fo±5
10.0
1.0
2.0
22at fo ±1765
1845
fo±4.5
13.0
3.0
2.0
28 at fo ±1855
2315
fo±15
2.7
1.0
1.7
40 at fo ±160
2385
fo±15
2.7
1.0
1.7
40 at fo ±160
2442
fo±42
2.5
1.0
1.7
40 at fo ±160
409.5
fo±3.5
3.0
0.8
1.7
30 at fo ±423
426.5
fo±3.5
3.0
0.8
1.7
30 at fo ±413
1410
fo±14.5
3.0
1.0
1.5
18 at fo ±34.5
1474
fo±2.5
12.0
2.8
2.0
15 at fo ±10
1880
fo±32.5
2.5
1.0
1.5
18 at fo ±100
1960
fo±32.5
3.0
1.0
1.4
45 at fo ±130
1950
fo±30
3.0
1.0
1.8
38 at fo ±60
2140
fo±30
3.0
1.0
1.8
38 at fo ±60
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
BP-S BandPass Filters
How to Order
BP
3
4R
1765
S
30
A







 Band Pass Filter
 Thickness
 Number of Resonator
 Center Frequency (MHz)
 Connect type s: SMD type
 BandWidth
Code
10
30
60
BandWidth
10MHz
30MHz
60MHz
 Version
Back to 1st Page - Dielectric Band Pass Filters - BP-S
Version 2010
http://www.token.com.tw/
rfq token.com.tw
27 of 30
TOKEN
DA Dielectric Patch Antenna
Dielectric
Patch Antenna (DA)
Token Dielectric Antenna (DA)
Technology Makes The List
Preview
Dielectric antenna is fed using coaxial ceramic media. By a coaxial extension of the inner conductor to form an
oscillator, used to excitation of electromagnetic waves, the sleeve of the role of the media, except clamping bar,
the more important is the reflection of electromagnetic waves, thus ensuring the incentives from the coaxial line
inner conductor of electromagnetic waves to the free end of dielectric rod transmission.
Token use of low-loss dielectric antennas, high-frequency dielectric material, strict process control, apply to the
Global Positioning System (GPS), radio broadcast system of small antenna elements.
Token electronics manufacturing dielectric patch antenna with rectangular microstrip antenna design and offset
one point feeding method for Global Positioning System GPS, media filters, multi-layer filters, cavity filters,
band-pass filter, military filters, high-frequency filters and so on, in line with RoHS standards.
DA series of microwave antenna, which provides clients a custom design and deliver smaller tolerances.
Dielectric antenna application specific design, but also for the frequency requirements, including different
inductance values and Q specifications adjusted.
Token will also produce devices outside these specifications to meet specific customer requirements,
please contact our sales for more information.
Features
- Small patch dimensions.
- Using high quality factor.
- Stabilized temperature coefficient.
- Provide highly stabilized performance.
Applications
- Global Positioning Systems (GPS)
- GPS Hold, Car Navigation System, GPS PDA.
- W-LAN.
28 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
DA Dielectric Patch Antenna
Typical Specifications
Part Number
Size
(mm)
DA1575S25T4A
DA1575S25T4B
DA1575S25T2B
DA1580S25T4A
DA1580S25T4B
DA1580S25T2B
DA1580S18T4
DA1580S18T2
DA1580S13T4
DA2450S13T4
DA2450S13T2
DA1575S36T4
DA2450D16
DA1616S25(Tx)
DA2492S25(Rx)
25*25*4
25*25*4
25*25*2
25*25*4
25*25*4
25*25*2
18*18*4
18*18*2
13*13*4
13*13*4
13*13*2
36*36*4
Φ16
25*25*4
25*25*4
Center
Frequency
(MHz)
1575
1575
1575
1580
1580
1580
1580
1580
1580
2450
2450
1575
2450
1616
2492
Band width
(MHz)
Gain
(dBi)
Ground Plane
(mm)
≥10
≥10
≥10
≥15
≥15
≥15
≥10
≥10
≥5
≥5
≥5
≥30
45
≥10
≥10
4.5
4.5
4.5
4.5
4.5
4.5
3.0
3.0
0.0
0.0
0.0
5.0
2.1
4.0
4.0
35*35
70*70
70*70
35*35
70*70
70*70
50*50
50*50
50*50
50*50
50*50
80*80
50*70
70*70
70*70
12.5
12.5
Application
GPS
W-LAN
Beidou Satellite
Position System
Note: Fo available on request. Other parameters available on request.
Dimensions (Unit: mm)
3.0Max
1.0Max
25.0
25.0
2.6±0.1
4 - R3.0
TOP
BOTTOM
Tol:±0.2
Unit: mm
Φ16±0.3
3.5±0.2
0.8±0.1
Φ0.8
4.0±0.2
3.0±0.5
TOP
Version 2010
http://www.token.com.tw/
1.0max
BOTTOM
rfq token.com.tw
29 of 30
TOKEN
DA Dielectric Patch Antenna
Typical Characteristic
CH1 MEN LOG
5dB/REF -15 dB
CH2 S11 1.005 U FS 1:50.766 Ω -2.3340 Ω
1:-32.692 dB 1 587.000 000 MHz
42.968 pF
CH1 Markers
Min
BW: 14.104714 MHz
cent: 1588.480998 MHz
Q: 112.62
1 loss: -32.692 dB
Cor
Cor
3
2
3
CH3 Markers
2:52.898 Ω
3.6621 Ω
1.58848 GHz
4
2
3:92.797 Ω
-16.094 Ω
1.58142 GHz
1
4:66.164 Ω
-34.492 Ω
1.59553 GHz
Center 1 575.000 000 MHz
Span 200.000 000 MHz
How to Order
DA
1580
S
18
T2





 Dielectric Patch Antenna
 Structure
 Thickness
 Center Frequency
 Dimensions
Back to 1st Page - Dielectric Patch Antenna - DA
30 of 30
http://www.token.com.tw/
rfq token.com.tw
Version 2010