TOKEN POWER TO-STYLE RESISTOR TO-220/TO-247 Heat Sink Mountable Power Film Token Electronics Industry Co., Ltd. Taiwan: No. 137, Sec. 1, Chung Shin Rd., Wu Ku Hsiang, Taipei Hsien, Taiwan, R.O.C TEL: 886-2-2981 0109; FAX: 886-2-2988 7487 China: 12F, Zhongxing Industry Bld., Chuangye Rd., Nanshan District, Shenzhen, Guangdong TEL: 86-755-2605 5363, 2605 5364; FAX: 86-755-2605 5365 http://www.token.com.tw rfq token.com.tw Product Index Information General Information ----------------------------------------------------------------------------- 01 Application Guide -------------------------------------------------------------------------------- 02 TO-220, TO-247 Power Resistors TO-220 Precision Power - RMG20 Series ------------------------------------------------ 05 TO-220 Precision Power - RMG30 Series ------------------------------------------------ 08 TO-220 Precision Power - RMG35 Series ------------------------------------------------ 11 TO-220 Precision Power - RMG50 Series ------------------------------------------------ 14 TO-247 Precision Power - RMG100 Series ---------------------------------------------- 17 Notice: Specification Changed or Version Updated will be posted at irregular intervals. All Updated and Final Specifications, Please Confirm with TOKEN ELECTRONICS REPRESENITIVES. : rfq token.com.tw : http://www.token.com.tw TOKEN TO-Style Resistors General Information TO-Style Power Resistors General Infornation Compact TO-Style Resistors are Low Cost Token Electronics TO-Style power film heat sink mountable resistors, TO-220 and TO-247 Style Packages, are designed for intermediate power applications and combines performance with an economical price. TO-220 Power Resistors, TO-247 Power Resistors RMG series are ultra precision and high power resistors encapsulated in the TO-220, TO-247 style power package. Power resistors are manufactured in 20W, 30W, 35W, 50W and 100W. Resistance element is electrically insulated from metal heat sink mounting tab. When properly mounted Token’s RMG** TO220/TO247 packaged power resistors provide up to 50/100 watts of steady state power. These very low inductance resistors are ideal for many industrial applications: power supplies, power controls and inrush/bleeder resistors. Download Entire TO-220, TO-247 Power Resistors Catalogue in PDF file (486KB). Non-Inductive Design for High Frequency Applications Token’s TO-Style Series satisfy demanding applications for accurate and stable power resistors housed in the convenient TO-Style case. The resistance element is isolated from the mounting tab by an alumina ceramic layer, providing very low thermal resistance and ensuring high insulation resistance between terminals and tab. These isolated resistor element are constructed and packaged in a high temperature plastic case with a single screw metal tab for easy mounting to the heat sink. The non-inductive design makes these products especially useful in high frequency and high speed pulse applications. Pulse-Loading Applications as Snubber or Bleeder Resistors Token’s TO-Style resistors are designed for use in pulse-loading applications, as bleeder or snubber resistors in switching power supplies, industrial power drives, medical, test equipment, high power equipment such as uninterruptible power supplies (UPS), and other power distribution and power conversion applications. The Power Film Resistors use an optimized process of Token’s thick film technology on an alumina substrate to achieve tolerances as low as ± 0.5 %, and up to ± 10 %. The Non-Inductive design and resistance values as low as 0.05 ohms are also ideal for current sensing applications. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 19 TOKEN TO-Style Resistors Application Guide TO-Style Power Resistors Application Guide Application Guide for Heat Sink Mountable Power Film Resistors Figur e 1 Temperature Measurement Locations on a TO-220 Metal Tab Power Package Tab Temperature Molded Package Temperature Film Temperature (T J ) Lead Temperature Case Temperature (T C ) Heat Sink Temperature Understanding Temperature and Power Rating The maximum power rating of TO-style power film resistor is specified with the case temperature (TC) at 25°C. This is the same method proven and established by the power semiconductor industry. Case temperature is the temperature measured at the center of the resistor mounting surface which is in contact with the heat sink, while the resistor is under electrical load. Case temperature is different from the molded body temperature, the tab temperature, the lead temperature, or the ambient temperature (as shown in Figure 1). Using case temperature we can determine the temperaure of the resistor film (TJ). This is crucial factor since early device failures are usually traced to excessive temperatures of the resistor film. Excessive film temperatures will cause a drift of the resistance value or reduced component life. Proper thermal design followed by temperature measurements to verify the design, and consistent mounting procedures will avoid these problems. Assembly of Thermal Material Due to variations in the mating surfaces between the resistor package and the heat sink air voids are created. These voids will substantially degrade the performance of TO-Style device. Thus, it is important to use a thermal interface material to fill these air voids. Several materials are available to reduce thermal resistance between the resistor and heat sink surface. 02 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TO-Style Resistors Application Guide ● Thermal grease is a combination of thermally conductive particles combined with a fluid forming a grease-like consistency. The fluid has typically been a silicone oil, however there are now very good “nonsilicone” thermal greases. Thermal grease has been used for many years and typically has among the lowest thermal resistances of all thermal materials available. ● Thermal pads, an alternative to thermal grease, are available from a number of manufacturers. These thermally conductive pads are available in sheet form or in pre-cut shapes designed for various standard packages such as the TO-220 and TO-247. Thermal pads are spongy materials and require uniform pressure and firm to perform properly. MP2060 HEAT SINK MP2060 HEAT SINK MP2060 HEAT SINK Selection of Hardware Assembly Proper hardware is an extremely important consideration in a good thermal design. The hardware must maintain firm even pressure on the device, through thermal cycling, without deforming the heat sink or the device. ● Spring Clips are preferred by many designers in place of screw assembly for attaching Token TO-Style Power Resistors to the heat sink. These spring clips are available from several manufacturers which offers a number of standard springs and heat sinks specifically designed for clip mounting TO-220 and TO-247 packages. Spring clips offer many benefits for ease of assembly, but their biggest advantage is the consistent application of optimum force over the center of the power resistor (as shown in Figure 2). ● Screw Mounting - Belleville or Conical Washers used with a screw are an effective method for attachment to a heat sink. A Belleville washer is a conical spring washer designed to maintain constant pressure over a wide range of deflection. The washers withstand long-term temperature cycling without variation in pressure. Figure 3 shows some typical hardware configurations for screw mounting a TO-Style package to a heat sink. Flat washers, star washers, and most split lock washers should not be used in place of Belleville washers since they do not provide a constant mounting pressure and may cause damage to the resistor. Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 19 TOKEN TO-Style Resistors Application Guide Assembly Considerations ● Avoid using this TO-Style family of power resistors for SMT assembly. ● Plastic mounting hardware that softens or creeps at high operating temperatures must be avoided. ● Never let the head of the screw contact the resistor. Use a flat washer or conical washer to evenly distribute the force. ● Avoid sheet metal screws which have a tendency to roll up the edges of the hole and create damaging burrs on the heat sink. ● Rivets are not recommended. With rivets it is difficult to maintain consistent pressure and they can easily damage plastic packages. ● Do not over-torque. If the screw is too tight, the package may crack or have a tendency to bow up at the end farthest from the screw (lead end). Pneumatic tools are not recommended. 04 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMG20 TO-220 Power Resistors TO-220 Power Resistors Power Resistors (TO-220 RMG20) Deliver Thermal Efficiency Preview Providing design engineers with superior heat dissipation in a standard industry-recognised package, Token Electronics has introduced a TO220-style power resistor using a highly reliable, economical copper thick film. The RMG20 Series, designed by Token, are rugged resistors feature noninductive performance and low thermal resistance, making them ideal for a variety of industrial applications such as power supplies, industrial controls and automotive, where cost effective performance and reliability are paramount. The non-noble copper ink construction of the RMG20 Series resistor makes it an efficient alternative to other thick film leaded power resistors while maintaining the excellent thermal conductivity and heat dissipation necessary for demanding power applications. With low resistance values at higher power ratings, Token’s proprietary resistor element ensures design engineers the highest quality noninductive performance in an efficient package. Operating temperatures range from -65°C to +150°C. Constructed with proprietary thick-film copper conductors and alloy resistors on an alumina ceramic substrate, the RMG20 Series resistor features low thermal impedance for high power dissipation. Contact us with your specific needs. Features - Molded Case for Protection and Easy to Mount. - 20 Watt at 25°C Case Temperature Heat Sink Mounted. - Isolated Case, Non Inductive, TO-220 Style Power Package. Applications - VHF Amplifiers, Snubber Circuits, Voltage Regulation, Load Resistor for Pulse Generators, High Speed Switching Power Supplies. Version 2010 http://www.token.com.tw/ rfq token.com.tw 05 of 19 TOKEN RMG20 TO-220 Power Resistors Dimensions (Unit: mm) T H W B1 D1 B T1 D C Type W RMG20 10.15~10.67 H T T2 T1 T2 B B1 C D 16.00~16.52 2.92~3.44 0.40~0.60 1.52~2.04 11.43~13.97 2.54~4.06 4.82~5.34 0.66~0.86 D1 1.14~1.40 Electrical Characteristics Specifications Resistance Range Resistance Tolerance ±5.00% ±10.0% ±1.00% ±5.00% ±10.0% ±1.00% ±5.00% ±10.0% ±0.50% ±1.00% ±5.00% ±10.0% 0.05Ω~1Ω 2Ω~5Ω 5Ω~10Ω 11Ω~10KΩ TCR(PPM/°C) ±200 ±100 ±200 ±50 ±100 ±200 Note: Operating Voltage:350V Max. Dielectric Strength: 1800VAC. Insulation Resistance: 10GΩmin. Working Temperature Range:-65°C to +150°C. Resistance Value < 1Ω is Available Power Derating Curve Derating Curve Rated Power (%) 100 80 60 40 20 0 0 20 50 75 100 125 150 175 Case Temperature (°C) 06 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMG20 Power Resistors Environmental Characteristics Test Item Temperature Coefficient of Resistance Terminal Strength Specification Test Method 10Ω and above, ±50ppm/°C Referenced to 25°C, ΔR taken at +105°C 1Ω and 10Ω, (±100ppm)/°C 2 times rated power with applied voltage not to exceed Δ R±0.3% 1.5 times maximum continuous operating voltage for 5 seconds. Δ R±1.0% MIL-R-39009,2,000 hours at rated power. MIL-STD-202F, Method 103B Δ R±0.5% 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. MIL-STD-202, Method 107G. Δ R±0.3% -65°C~150°C,100 cycle Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N. Vibration, High Frequency Δ R±0.2% Short Time Overload Load Life Humidity (Steady State) Thermal Shock MIL-STD-202, Method 204, Cond.D. Note:1.Lead Material: Tinned Copper. 2.Without a Heat Sink, when in Free Air at 25°C, the RMG20 is Rated for 2.25W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4.The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. 5.Thermal Grease Should be Applied Properly. How to Order RMG 20 J P D 10R Part Number: TO-220 Power Resistors Power Rating Resistance Tolerance Code D F G J K TCR Resistance Tolerance ±0.5% ±1% ±2% ±5% ±10% TCR D ±50PPM/°C ±100PPM/°C ±200PPM/°C No specified E F - Resistance Code 0R1 10R 1K 10K Packaging Code T P Code Packaging Tube Bulk Resistance 0.1Ω 10Ω 1KΩ 10KΩ Back to 1st Page - TO-220 Power Resistors (RMG20) Version 2010 http://www.token.com.tw/ rfq token.com.tw 07 of 19 TOKEN RMG30 TO-Style Power-Film Resistors To-Style Power-Film Resistors TO-Style Power-Film Resistors - RMG30 Series Take on Transistor Outlines Preview A wide range of TO-style power film resistors that are designed for use in power electronic circuits such as snubbers, current limiting, loads, current sensing and other power resistor applications, is available from Token Components. Their compact heatsink-mountable construction ensures that they are ideal for high-power-density applications, and the noninductive form allows these TO-style resistors to operate at up to 30 Watt at 25°C case temperature. RMG30 Series values as low as 0.05Ω make them particularly suited for current sensing applications with Pb-free Terminations Meet RoHS Requirments. The resistance range of these resistors is from 0.05Ω to 10KΩ and tolerances are standard at 1% for most resistance values, although 5% tolerances are available. Many standard values are available from Token. Contact us with your specific needs. Features - 30 Watt at 25°C Case Temperature Heat Sink Mounted. - Isolated Case, Non Inductive, TO-220 Style Power Package. - Single Screw Mounting to Heat Sink, Molded Case for Protection and Easy to Mount. Applications - Gate Resistors in Power Supplies, Terminal Resistance in RF Power Amplifiers. - UPS, Snubbers, Voltage Regulation, Low Energy Pulse Loading, Load and Dumping Resistors in CRT Monitors. 08 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMG30 TO-Style Power-Film Resistors Dimensions (Unit: mm) T W G H R B1 D1 T1 B D C T2 Type W H T T1 T2 B B1 C D D1 G R RMG30 10.15 ~ 10.67 16.00 ~ 16.52 2.92 ~ 3.44 0.40 ~ 0.60 1.52 ~ 2.04 11.43 ~ 13.97 2.54 ~ 4.06 4.82 ~ 5.34 0.66 ~ 0.86 1.14 ~ 1.40 2.92 ~ 3.44 3.08 ~ 3.28 Electrical Characteristics Specifications Resistance Range Resistance Tolerance ±5.00% ±10.0% ±1.00% ±5.00% ±10.0% ±1.00% ±5.00% ±10.0% ±0.50% ±1.00% ±5.00% ±10.0% 0.05Ω~1Ω 2Ω~5Ω 5Ω~10Ω 11Ω~10KΩ TCR(PPM/°C) ±200 ±100 ±200 ±50 ±100 ±200 Note: Operating Voltage:350V Max. Dielectric Strength: 1800VAC Insulation Resistance: 10GΩmin. Working Temperature Range:-65°C to +150°C. Resistance Value < 1Ω is Available Power Derating Curve Derating Curve Rated Power (%) 100 80 60 40 20 0 0 25 50 75 100 125 150 175 Case Temperature (°C) Version 2010 http://www.token.com.tw/ rfq token.com.tw 09 of 19 TOKEN RMG30 TO-220 Power Resistors Environmental Characteristics Test Item Specification Test Method Temperature Coefficient of 10Ω and above, ±50ppm/°C Referenced to 25°C, ΔR taken at +105°C Resistance 1Ω and 10Ω, (±100ppm)/°C 2 times rated power with applied voltage not to exceed Short Time Overload Δ R±0.3% 1.5 times maximum continuous operating voltage for 5 seconds. Load Life Δ R±1.0% MIL-R-39009,2,000 hours at rated power. MIL-STD-202F, Method 103B Humidity (Steady State) Δ R±0.5% 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. MIL-STD-202, Method 107G. Thermal Shock Δ R±0.3% -65°C~150°C,100 cycle Terminal Strength Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N. Vibration, High Frequency Δ R±0.2% MIL-STD-202, Method 204, Cond.D. Note:1.Lead Material: Tinned Copper. Maximum Torque: 0.9 Nm. 2.Without Heat Sink, When in Free Air at 25°C, the RMG30 is Rated for 2.25W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4.The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. 5.Thermal Grease Should be Applied Properly. How to Order RMG 30 J P D 10R Part Number Power Rating Resistance Tolerance (%) Code D F G J K TCR TCR D ±50PPM/°C ±100PPM/°C ±200PPM/°C No specified E F - Resistance Tolerance ±0.5% ±1% ±2% ±5% ±10% Resistance Code 0R1 10R 1K 10K Packaging Code T P Code Packaging Tube Bulk Resistance 0.1Ω 10Ω 1KΩ 10KΩ Back to 1st Page - TO-220 Power Resistors (RMG30) 10 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMG35 Power TO-Style Resistors Power TO-Style Resistors TO-220 Power TO-Style Resistors - RMG35 Series Boast Superior Thermal Performance Preview Giving power electronics design engineers a comprehensive range of high-wattage surface mount and throughhole resistors designed to provide superior thermal performance in densely populated power supply circuits, Token Electronics has released a series of noninductive power resistors with power ratings 35W, in popular transistor-style packages (TO-220). The RMG35 resistors are designed to provide complete thermal flow from the resistive element to the integral metal flange of the TO-style packages, giving design engineers the ability to specify them for high-wattage power electronics circuits that can experience elevated temperatures during operation. The devices are all rated for operation from -65°C to +150°C. Their superior thermal performance and extreme power ratings make the RMG35 Series resistors ideal for switch-mode power supply circuits, motor control and drive circuits, automotive electronics, industrial power equipment and UPS systems. In addition, their non-inductance exhibit excellent high frequency characteristics for use in high frequency industrial RF power sources, RF linear amplifiers, termination resistor of RF circuit etc. The RMG35 Series resistors feature thermally enhanced two-leaded industry standard packages designed for mounting directly to a heatsink. Token Electronics will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. All RMG35 Series devices are RoHS-compliant, and compatible with high temperature soldering processes normally employed for lead free solders. Contact us with your specific needs. Applications - RF Power Amplifier. - Switching Power Supplies. - Low Energy Pulse Loading. - Automated Machine Controller. - UPS, Snubbers Circuits, Voltage Regulation. Features - Single Screw Mounting to Heat Sink. - Molded Case for Protection and Easy to Mount. - 35 Watt at 25°C Case Temperature Heat Sink Mounted. - TO-220 Style Power Package, Isolated Case, Non Inductive. - Low Thermal Resistance to Heat Sink at Rth < 4.28°C/W. Version 2010 http://www.token.com.tw/ rfq token.com.tw 11 of 19 TOKEN RMG35 Power TO-Style Resistors Dimensions (Unit: mm) T W N G M H R B1 D1 T1 B D T2 C Type W 9.91 ~ 10.41 RMG35 H 14.50 ~ 15.00 T 4.06 ~ 4.82 T1 0.55 ~ 0.70 T2 2.05 ~ 2.52 B 12.70 ~ 14.70 B1 4.00 C 4.83 ~ 5.33 D 0.70 ~ 0.86 D1 1.17 ~ 1.37 G 2.85 ~ 3.05 R 3.55 ~ 3.75 M 5.85 ~ 6.35 N 1.20 ~ 1.40 Electrical Characteristics Specifications Resistance Range Resistance Tolerance TCR(PPM/°C) 0.05Ω~1Ω ±5.00%; ±10.0% - >0.1Ω~1Ω ±1.00%; ±5.00%; ±10.0% - >1Ω~3Ω ±1.00%; ±5.00%; ±10.0% ±300 >3Ω~10KΩ ±1.00%; ±5.00%; ±10.0% >10Ω~10KΩ ±0.50%; ±1.00% ±5.00%; ±10.0% ±100 ±200 ±50 ±100 ±200 Note: Operating Voltage:350V Max. Dielectric Strength: 1800VAC. Insulation Resistance: 10GΩmin. Working Temperature Range:-65°C to +150°C . Resistance Value < 1Ω is Available Power Derating Curve Derating Curve Rated Power (%) 100 80 60 40 20 0 0 25 50 75 100 125 150 175 Case Temperature (°C) 12 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMG35 Power TO-Style Resistors Environmental Characteristics Test Item Specification Test Method Temperature Coefficient of 10Ω and above, ±50ppm/°C Referenced to 25°C, ΔR taken at +105°C Resistance 1Ω and 10Ω, (±100ppm)/°C 2 times rated power with applied voltage not to exceed Short Time Overload Δ R±0.3% 1.5 times maximum continuous operating voltage for 5 seconds. Load Life Δ R±1.0% MIL-R-39009,2,000 hours at rated power. MIL-STD-202F, Method 103B Humidity (Steady State) Δ R±0.5% 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. MIL-STD-202, Method 107G. Thermal Shock Δ R±0.3% -65°C~150°C,100 cycle Terminal Strength Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N. Vibration, High Frequency Δ R±0.2% MIL-STD-202, Method 204, Cond.D. Note:1.Lead Material: Tinned Copper. Maximum Torque: 0.9 Nm. 2.Without Heat Sink, When in Free Air at 25°C, the RMG35 is Rated for 2.50W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4.The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. 5.Thermal Grease Should be Applied Properly. How to Order RMG 35 J P D 10R Part Number TCR (PPM/°C) Power Rating Resistance Tolerance (%) Code D F G J K TCR D ±50PPM/°C ±100PPM/°C ±200PPM/°C No specified E F - Resistance Tolerance ±0.5% ±1% ±2% ±5% ±10% Resistance Code 0R1 10R 1K 10K Package Code T P Code Package Tube Bulk Resistance 0.1Ω 10Ω 1KΩ 10KΩ Back to 1st Page - TO-220 Power Resistors (RMG35) Version 2010 http://www.token.com.tw/ rfq token.com.tw 13 of 19 TOKEN RMG50 To-Style Power Resistors To-Style Power Resistors To-Style Power Resistors Keeps Its Cool Preview Providing design engineers with an open screened substrate device for applications requiring superior thermal performance, Token Electronics has developed a non-moulded power resistor rated up to 50W. Designated the RMG50 Series, the resistor is housed in a TO-220 opened screened substrate package, and features an insulated tapered venturi bonded to the substrate for maximum heat dissipation. The design of the RMG50 Series resistor allows for three methods of heat dissipation, resulting in exceptional power handling characteristics. The chimney-shaped tapered venturi is attached to the ceramic substrate and convection forces hot air up the ‘neck’ of the chimney and away from the resistor face of the component. The power resistor utilises all three methods of heat dissipation, including conduction through the heatsink tab, radiation from the resistor surface, and convection through the venturi element. Typical applications for the RMG50 resistor include higher wattage switch-mode power supply circuits, motor control and drive circuits, inverters and industrial power equipment. Resistance ranges from 0.05Ω to 10KΩ, with tolerances of ±0.50% and ±10% and operating temperature range is -65°C to +150°C. The RMG50 Series TO-220 provides customers requiring more wattage in a smaller package with an excellent alternative. Token Electronics will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. Contact us with your specific needs. Applications - UPS. - Voltage Regulation. - Pulsing applications. - Switching Power Supplies. - Non-inductive design for high frequency. Features - Electrically Isolated Case. - TO-220 Style Power Package. - Low ohm value, non-inductance design - Molded Case for Protection and Easy to Mount. - 50 Watt at 25°C Case Temperature Heat Sink Mounted. 14 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMG50 To-Style Power Resistors Dimensions (Unit: mm) T H W B1 D1 B T1 D C Type W RMG50 10.15~10.67 H T2 T T1 T2 B B1 C D D1 16.00~16.52 2.92~3.44 0.40~0.60 1.52~2.04 11.43~13.97 2.54~4.06 4.82~5.34 0.66~0.86 1.14~1.40 Electrical Characteristics Specifications Resistance Range Resistance Tolerance ±5.00% ±10.0% ±1.00% ±5.00% ±10.0% ±1.00% ±5.00% ±10.0% ±0.50% ±1.00% ±5.00% ±10.0% 0.05Ω~1Ω 2Ω~5Ω 5Ω~10Ω 11Ω~10KΩ TCR(PPM/°C) ±200 ±100 ±200 ±50 ±100 ±200 Note: Operating Voltage:350V Max. Dielectric Strength: 1800VAC Insulation Resistance: 10GΩmin. Working Temperature Range:-65°C to +150°C Resistance Value < 1Ω is Available Power Derating Curve Derating Curve Rated Power (%) 100 80 60 40 20 0 0 25 50 75 100 125 150 175 Case Temperature (°C) Version 2010 http://www.token.com.tw/ rfq token.com.tw 15 of 19 TOKEN RMG50 To-Style Power Resistors Environmental Characteristics Test Item Temperature Coefficient of Resistance Short Time Overload Load Life Humidity (Steady State) Thermal Shock Terminal Strength Vibration, High Frequency Specification Test Method 10Ω and above, ±50ppm/°C Referenced to 25°C, ΔR taken at +105°C 1Ω and 10Ω, (±100ppm)/°C 2 times rated power with applied voltage not to exceed Δ R±0.3% 1.5 times maximum continuous operating voltage for 5 seconds. Δ R±1.0% MIL-R-39009,2,000 hours at rated power. MIL-STD-202F, Method 103B Δ R±0.5% 40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours. MIL-STD-202, Method 107G. Δ R±0.3% -65°C~150°C,100 cycle Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N. Δ R±0.2% MIL-STD-202, Method 204, Cond.D. Note: 1.Lead Material: Tinned Copper. Maximum Torque: 0.9 Nm. 2.Without a Heat Sink, When in Free Air at 25°C, the RMG50 is Rated for 3W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4. The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. 5.Thermal Grease Should be Applied Properly. How to Order RMG 50 J P D 10R Part Number TCR (PPM/°C) Power Rating Resistance Tolerance (%) Code D F G J K TCR D ±50PPM/°C ±100PPM/°C ±200PPM/°C No specified E F - Resistance Tolerance ±0.5% ±1% ±2% ±5% ±10% Resistance Code 0R1 10R 1K 10K Package Code T P Code Package Tube Bulk Resistance 0.1Ω 10Ω 1KΩ 10KΩ Back to 1st Page - TO-220 Power Resistors (RMG50) 16 of 19 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN RMG100 TO-247 Power Resistors To-247 Power Resistors TO-247 Power Resistors handle high-speed pulses Preview Providing design engineers with a high-power resistive device in a stable transistor style package, Token Electronics RMG100 Series TO-247 power resistors are available in 100W. The resistors are specified for applications that require accuracy and stability. The RMG100 Series resistors are designed with an alumina ceramic layer that separates the resistance element and mounting tab. This construction provides very low thermal resistance while ensuring high insulation resistance between the terminals and the metal back plate. As a result, the resistors feature a very low inductance, making them ideal for high frequency and high-speed pulse applications. Additional applications for the RMG100 Series TO-247 resistors include automation test equipment, high frequency snubber and pulse handling circuits, motor control and drive circuits, switch mode power supplies, load resistors, automotive electronics, industrial power equipment, UPS systems and industrial computers. RMG100 Series 100W resistors feature a resistance range of 0.1Ω to 10KΩ and operating temperature range is -65°C to +175°C. Token will also produce devices outside these specifications to meet customer requirements. The RMG100 Series power resistors are RoHS-compliant with Pb-free Terminations. Contact us with your specific needs. Applications - Low Energy Pulse Loading. - Gate Resistors in Power Supplies. - UPS, Snubbers, Voltage Regulation. - Terminal Resistance in RF Power Amplifiers. - Load and Dumping Resistors in CRT Monitors. Features - TO-247 Style Power Package. - Single M3 Screw Mounting to Heat Sink. - Molded Case for Protection and Easy to Mount. - Non-Inductive Design, Electrically Isolated Case. - 100 Watts at 25°C Case Temperature Heat Sink Mounted. Version 2010 http://www.token.com.tw/ rfq token.com.tw 17 of 19 TOKEN RMG100 TO-247 Power Resistors Dimensions (Unit: mm) T W G H R B1 D1 T1 B D C Type RMG100 W 15.49 ~ 16.01 H 20.44 ~ 20.96 T 4.69 ~ 5.21 T1 0.55 ~ 1.07 T2 T2 2.15 ~ 2.67 B 13.21 ~ 15.75 B1 2.03 ~ 3.55 C 9.90 ~ 10.42 D 1.42 ~ 1.62 D1 3.45 ~ 3.81 G 5.07 ~ 5.59 R 3.53 ~ 3.73 Electrical Characteristics Specifications Resistance Range Resistance Tolerance ±5% ±10% ±1% ±1% ±5% ±10% ±1% ±5% ±10% 0.1Ω~1Ω >1Ω~3Ω >3Ω~10Ω >10Ω~10KΩ TCR(PPM/°C) ±300 ±100 ±200 ±50 ±100 ±200 Note: Operating Voltage: 350V Max. Dielectric Strength: 1800V AC. Insulation Resistance: 10GΩ min. Working Temperature Range: -65°C to +175°C. Power Derating Curve Derating Curve Rated Power (%) 100 18 of 19 80 60 40 20 0 0 25 50 75 http://www.token.com.tw/ 100 125 150 175 rfq token.com.tw Version 2010 TOKEN RMG100 TO-247 Power Resistors Environmental Characteristics Test Item Temperature Coefficient of Resistance Specification Test Method As spec. Referenced to 25°C, ΔR taken at +105°C Short Time Overload ΔR±0.5% Dielectric strength Load Life Moisture resistance ΔR±0.15% ΔR±1.0% ΔR±0.5% Thermal Shock ΔR±0.5% Terminal Strength ΔR±0.2% Vibration, High Frequency ΔR±0.42% Solderability 90% min coverage 1.5 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds. MIL-STD-202F Method 301(1800V AC, 60s) MIL-PRF-39009D, 4.8.13 Rated power, 2,000 hours. -10°C~+65°C, RH>90%, cycle 240 hours. MIL-STD-202, Method 107G. -65°C~150°C,100 cycle MIL-STD-202F, Method 211, Cond. A (Pull Test) 2.4N MIL-STD-202F, Method 204, Cond.D MIL-STD-202F Method 208H 245°C±5°C, 3±0.5 (sec) Note:1.Lead Material: Tinned Copper. Thermal Grease Should be Applied Properly. 2.When in Free Air at 25°C, the RMG100 is Rated for 3.5W. 3.The Case Temperature is to be used for the Definition of the Applied Power Limit. 4.The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink. How to Order RMG 100 J P D 10R Part Number Power Rating Resistance Tolerance (%) Code D F G J K TCR (PPM/°C) Resistance Tolerance ±0.5% ±1% ±2% ±5% ±10% TCR D ±50PPM/°C ±100PPM/°C ±200PPM/°C ±300PPM/°C No specified E F G - Resistance Code 0R1 10R 1K 10K Package Code T P Code Package Tube Bulk Resistance 0.1Ω 10Ω 1KΩ 10KΩ Back to 1st Page - TO-220 Power Resistors (RMG100) Version 2010 http://www.token.com.tw/ rfq token.com.tw 19 of 19