05413 SMDJ SERIES Only One Name Means ProTek’Tion™ 3000 WATT TVS COMPONENT APPLICATIONS • Power Supply • AC/DC Applications • Telecom DO-214AB PACKAGE FEATURES MECHANICAL CHARACTERISTICS • UL File Recognition #E208219 • IEC Compatibility 61000-4-2 (ESD) • IEC Compatibility 61000-4-4 (EFT) • IEC Compatibility 61000-4-5 (Surge) • Glass Passivated Chip • 3000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Low Leakage Current • Unidirectional and Bidirectional Configurations • Excellent Clamping Capability • Very Fast Response Time • Available in Multiple Voltages • RoHS Compliant • REACH Compliant • Molded JEDEC DO-214AB Package • Approximate Weight: 0.248 grams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 16mm Tape and Reel Per EIA Standard 481 • Terminal: Solderable per MIL-STD-750, Method 2026 • Flammability Rating UL 94V-0 PIN CONFIGURATIONS 05413.R5 12/14 1 1 2 2 Page 1 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature TA -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Power (tp =10/1000µs) - See Figure 1 and Note 2 PPP 3000 Watts Power Dissipation on Infinite Heatsink at TL = 75°C PD 6.0 Watts Peak Forward Surge Current, 8.3ms single half sinewave - Unidirectional Only (Note 2) IFSM 300 Amps Maximum Instantaneous Forward Voltage at 100A - Unidirectional Only VF 3.5 V NOTE 1. Non-repetitive current pulse per Figure 2 and derated above TA = 25°C per Figure 2. 2. Measured on 8.3ms single half sinewave or equivalent square wave, duty cycle = 4 pulses per minute maximum. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) DEVICE MARKING REVERSE STAND-OFF VOLTAGE BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS MIN MAX @ IT mA MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA UNI BI VRWM VOLTS SMDJ5.0 RDD DDD 5.0 6.40 7.30 50 9.6 313 5000 SMDJ5.0A RDE DDE 5.0 6.40 7.00 50 9.2 326 5000 SMDJ6.0 RDF DDF 6.0 6.67 8.15 50 11.4 263 5000 SMDJ6.0A RDG DDG 6.0 6.67 7.37 50 10.3 291 5000 SMDJ6.5 RDH DDH 6.5 7.22 8.82 50 12.3 244 2000 SMDJ6.5A RDK DDK 6.5 7.22 7.98 50 11.2 268 2000 SMDJ7.0 RDL DDL 7.0 7.78 9.51 50 13.3 226 1000 SMDJ7.0A PDM DDM 7.0 7.78 8.60 50 12.0 250 1000 SMDJ7.5 PDN DDN 7.5 8.33 10.20 5 14.3 210 250 SMDJ7.5A PDP DDP 7.5 8.33 9.21 5 12.9 233 250 SMDJ8.0 PDQ DDQ 8.0 8.89 10.90 5 15.0 200 150 SMDJ8.0A PDR DDR 8.0 8.89 9.83 5 13.6 221 150 SMDJ8.5 PDS DDS 8.5 9.44 11.50 5 15.9 189 50 SMDJ8.5A PDT DDT 8.5 9.44 10.40 5 14.4 208 50 SMDJ9.0 PDU DDU 9.0 10.00 12.20 5 16.9 178 20 SMDJ9.0A PDV DDV 9.0 10.00 11.10 5 15.4 195 20 SMDJ10 PDW DDW 10.0 11.10 13.60 5 18.8 160 15 SMDJ10A PDX DDX 10.0 11.10 12.30 5 17.0 176 15 SMDJ11 PDY DDY 11.0 12.20 14.90 5 20.1 149 2 SMDJ11A PDZ DDZ 11.0 12.20 13.50 5 18.2 165 2 SMDJ12 PED DED 12.0 13.30 16.30 5 22.0 136 2 SMDJ12A PEE DEE 12.0 13.30 14.70 5 19.9 151 2 05413.R5 12/14 Page 2 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) DEVICE MARKING UNI REVERSE STAND-OFF VOLTAGE BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS BI VRWM VOLTS MIN MAX @ IT mA MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA SMDJ13 PEF DEF 13.0 14.40 17.60 5 23.8 126 2 SMDJ13A PEG DEG 13.0 14.40 15.90 5 21.5 140 2 SMDJ14 PEH DEH 14.0 15.60 19.10 5 25.8 116 2 SMDJ14A PEK DEK 14.0 15.60 17.20 5 23.2 129 2 SMDJ15 PEL DEL 15.0 16.70 20.40 5 26.9 112 2 SMDJ15A PEM DEM 15.0 16.70 18.50 5 24.4 123 2 SMDJ16 PEN DEN 16.0 17.80 21.80 5 28.8 104 2 SMDJ16A PEP DEP 16.0 17.80 19.70 5 26.0 115 2 SMDJ17 PEQ DEQ 17.0 18.90 23.10 5 30.5 98.4 2 SMDJ17A PER DER 17.0 18.90 20.90 5 27.6 109 2 SMDJ18 PES DES 18.0 20.00 24.40 5 32.2 93.2 2 SMDJ18A PET DET 18.0 20.00 22.10 5 29.2 103 2 SMDJ19 PEA DEA 19.0 21.13 25.76 5 34.0 88.2 2 SMDJ19A PEB DEB 19.0 21.10 23.30 5 30.8 97.5 2 SMDJ20 PEU DEU 20.0 22.20 27.10 5 35.8 83.8 2 SMDJ20A PEV DEV 20.0 22.20 24.50 5 32.4 92.6 2 SMDJ22 PEW DEW 22.0 24.40 29.80 5 39.4 76.4 2 SMDJ22A PEX DEX 22.0 24.40 26.90 5 35.5 84.5 2 SMDJ24 PEY DEY 24.0 26.70 32.60 5 43.0 69.8 2 SMDJ24A PEZ DEZ 24.0 26.70 29.50 5 38.9 77.1 2 SMDJ26 PFD DFD 26.0 28.90 35.30 5 46.6 64.4 2 SMDJ26A PFE DFE 26.0 28.90 31.90 5 42.1 71.3 2 SMDJ28 PFF DFF 28.0 31.10 38.00 5 50.0 60.0 2 SMDJ28A PFG DFG 28.0 31.10 34.40 5 45.4 66.1 2 SMDJ30 PFH DFH 30.0 33.30 40.70 5 53.5 56.1 2 SMDJ30A PFK DFK 30.0 33.30 36.80 5 48.4 62.0 2 SMDJ33 PFL DFL 33.0 36.70 44.90 5 59.0 50.9 2 SMDJ33A PFM DFM 33.0 36.70 40.60 5 53.3 56.3 2 SMDJ36 PFN DFN 36.0 40.00 48.90 5 64.3 46.7 2 SMDJ36A PFP DFP 36.0 40.00 44.20 5 58.1 51.6 2 SMDJ40 PFQ DFQ 40.0 44.40 54.30 5 71.4 42.0 2 SMDJ40A PFR DFR 40.0 44.40 49.10 5 64.5 46.5 2 SMDJ43 PFS DFS 43.0 47.80 58.40 5 76.7 39.1 2 SMDJ43A PFT DFT 43.0 47.80 52.80 5 69.4 43.2 2 05413.R5 12/14 Page 3 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) DEVICE MARKING UNI BI REVERSE STAND-OFF VOLTAGE VRWM VOLTS BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS MIN @ IT mA MAX MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA SMDJ45 PFU DFU 45.0 50.0 61.10 5 80.3 37.4 2 SMDJ45A PFV DFV 45.0 50.0 55.30 5 72.7 41.3 2 SMDJ48 PFW DFW 48.0 53.30 65.10 5 85.5 35.1 2 SMDJ48A PFX DFX 48.0 53.30 58.90 5 77.4 38.8 2 SMDJ51 PFY DFY 51.0 56.70 69.30 5 91.1 32.9 2 SMDJ51A PFZ DFZ 51.0 56.70 62.70 5 82.4 36.4 2 SMDJ54 RGD DGD 54.0 60.00 73.30 5 96.3 31.2 2 SMDJ54A RGE DGE 54.0 60.00 66.30 5 87.1 34.4 2 SMDJ58 RGF DGF 58.0 64.40 78.70 5 103.0 29.1 2 SMDJ58A RGG DGG 58.0 64.40 71.20 5 93.6 32.1 2 SMDJ60 RGH DGH 60.0 66.70 81.50 5 107.0 28.0 2 SMDJ60A PGK DGK 60.0 66.70 73.70 5 96.8 31.0 2 SMDJ64 PGL DGL 64.0 71.10 86.90 5 114.0 26.3 2 SMDJ64A PGM DGM 64.0 71.10 78.60 5 103.0 29.1 2 SMDJ70 PGN DGN 70.0 77.80 95.10 5 125.0 24.0 2 SMDJ70A PGP DGP 70.0 77.80 86.00 5 113.0 26.6 2 SMDJ75 PGQ DGQ 75.0 83.30 102.00 5 134.0 22.4 2 SMDJ75A PGR DGR 75.0 83.30 92.10 5 121.0 24.8 2 SMDJ78 PGS DGS 78.0 86.70 106.00 5 139.0 21.6 2 SMDJ78A PGT DGT 78.0 86.70 95.80 5 126.0 23.8 2 SMDJ80 PGA DGA 80.0 88.96 108.80 5 143.2 21.0 2 SMDJ80A PGB DGB 80.0 88.80 97.60 5 129.6 23.2 2 SMDJ85 PGU DGU 85.0 94.40 115.00 5 151.0 19.9 2 SMDJ85A PGV DGV 85.0 94.40 104.00 5 137.0 21.9 2 SMDJ90 PGW DGW 90.0 100.00 122.00 5 160.0 18.8 2 SMDJ90A PGX DGX 90.0 100.00 111.00 5 146.0 20.6 2 SMDJ100 PGY DGY 100.0 111.00 136.00 5 179.0 16.8 2 SMDJ100A PGZ DGZ 100.0 111.00 123.00 5 162.0 18.5 2 SMDJ110 PHD DHD 110.0 122.00 149.00 5 196.0 15.3 2 SMDJ110A PHE DHE 110.0 122.00 135.00 5 177.0 17.0 2 SMDJ120 PHF DHF 120.0 133.00 163.00 5 214.0 14.0 2 SMDJ120A PHG DHG 120.0 133.00 147.00 5 193.0 15.5 2 SMDJ130 PHH DHH 130.0 144.00 176.00 5 231.0 13.0 2 SMDJ130A PHK DHK 130.0 144.00 159.00 5 209.0 14.4 2 05413.R5 12/14 Page 4 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1-3) DEVICE MARKING UNI BI REVERSE STAND-OFF VOLTAGE VRWM VOLTS BREAKDOWN VOLTAGE TEST CURRENT V(BR) @ IT VOLTS MIN @ IT mA MAX MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM REVERSE SURGE CURRENT MAXIMUM REVERSE LEAKAGE CURRENT @ IP VC VOLTS @I PP AMPS @V RWM IR µA SMDJ140 PHA DHA 140.0 155.68 190.40 5 250.6 12.0 2 SMDJ140A PHB DHB 140.0 155.00 171.00 5 226.8 13.2 2 SMDJ150 PHL DHL 150.0 167.00 204.00 5 268.0 11.2 2 SMDJ150A PHM DHM 150.0 167.00 185.00 5 243.0 12.4 2 SMDJ160 PHN DHN 160.0 178.00 218.00 5 287.0 10.5 2 SMDJ160A PHP DHP 160.0 178.00 197.00 5 259.0 11.6 2 SMDJ170 PHQ DHQ 170.0 189.00 231.00 5 304.0 9.9 2 SMDJ170A PHR DHR 170.0 189.00 209.00 5 275.0 10.9 2 SMDJ180 PHS DHS 180.0 200.16 244.80 5 322.2 9.3 2 SMDJ180A PHT DHT 180.0 200.00 220.00 5 291.6 10.3 2 SMDJ190 PHU DHU 190.0 211.28 258.40 5 340.1 8.8 2 SMDJ190A PHV DHV 190.0 211.00 232.00 5 307.8 9.8 2 SMDJ200A PHW DHW 200.0 224.00 247.00 5 324.0 9.3 2 SMDJ220A PHX DHX 220.0 246.00 272.00 5 356.0 8.4 2 SMDJ250A PHZ DHZ 250.0 279.00 309.00 5 405.0 7.4 2 SMDJ300A PJE DJE 300.0 335.00 371.00 5 486.0 6.2 2 SMDJ350A PJG DJG 350.0 391.00 432.00 5 567.0 5.3 2 SMDJ400A PJK DJK 400.0 447.00 494.00 5 648.0 4.6 2 SMDJ440A PJM DJM 440.0 492.00 543.00 5 713.0 4.2 2 NOTE 1. Suffix ‘A’ denotes 5% tolerance, without ‘A’ denotes 10% tolerance. 2. Add suffix ‘C’ or ‘CA’ after part number to specify a bidrectional device. 3. For bidirectional devices having a VRWM of 10 Volts and under, the IR limit is double. 05413.R5 12/14 Page 5 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kilowatts 100 10 3kW, 10/1000µs Waveform 1 0.1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 FIGURE 3 POWER DERATING CURVE FIGURE 2 PULSE WAVEFORM 100 tf TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 100,000 td = t/(IPP/2) 50 60 40 20 e 0 0 -t 1 2 0 3 25 50 75 100 125 150 TA - Ambient Temperature - °C t - Time - ms 05413.R5 12/14 0 Page 6 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ TYPICAL DEVICE CHARACTERISTICS FIGURE 4 TYPICAL JUNCTION CAPACITANCE CJ - Junction Capacitance - pF 10,000 Bidirectional V-0V Unidirectional V-0V 1,000 Unidirectional @ VR 100 Bidirectional @ VR TJ = 25°C f = 1MHz VSIA = 50mVp-p 10 1 10 100 VBR - Reverse Breakdown Voltage - V FIGURE 6 STEADY STATE POWER DERATING CURVE FIGURE 5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10.0 Steady State Power Dissipation - Watts IFSM - Peak Forward Surge Current - A 300 250 200 150 100 1,000 1 05413.R5 12/14 10 Number of Cycles at 60 Hz 100 Page 7 8.0 6.0 4.0 2.0 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 175 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ DO-214AB PACKAGE INFORMATION Polarity Band OUTLINE DIMENSIONS DIM MILLIMETERS INCHES MIN MAX MIN MAX A 2.86 3.16 0.114 0.126 B 6.52 7.02 0.260 0.280 C 5.52 6.15 0.220 0.245 D 1.98 2.59 0.079 0.103 E 0.75 1.51 0.030 0.060 F 0.00 0.20 0.000 0.008 G 7.64 8.02 0.305 0.320 H 0.15 0.30 0.006 0.012 A C B H D NOTES 1. Dimensions are exclusive of mold flash and metal burrs. E F G PAD LAYOUT DIMENSIONS DIM MILLIMETERS INCHES MIN MAX MIN MAX A 3.43 - 0.135 - B 2.03 - 0.080 - C - 4.32 - 0.170 D 2.03 - 0.080 - 05413.R5 12/14 A B Page 8 C D www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ TAPE AND REEL 10 Pitches Cumulative Tolerance on tape ± 0.2 P0 D t E F W K0 B0 A0 P User Direction of Feed SPECIFICATIONS REEL DIA. TAPE WIDTH 330mm (13”) 16mm A0 B0 K0 D E F 6.05 ± 0.10 8.31 ± 0.10 2.54 ± 0.10 1.55 ± 0.05 1.75 ± 0.10 W P0 P tmax 7.5 ± 0.10 16.00 ± 0.30 4.00 ± 0.10 8.00 ± 0.10 0.4 NOTES 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T13 = 13” Reel - 3,000 pieces per 16mm tape. Marking on Part - marking code (see page 2), date code, logo and cathode defined by polarity band. ORDERING INFORMATION BASE PART NUMBER (Voltage = xx) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY SMDJxx N/A -T13 3,000 13” N/A SMDJxxA N/A -T13 3,000 13” N/A SMDJxxC N/A -T13 3,000 13” N/A SMDJxxCA N/A -T13 3,000 13” N/A This device is only available in a Lead-Free configuration. 05413.R5 12/14 Page 9 www.protekdevices.com 05413 SMDJ SERIES Only One Name Means ProTek’Tion™ COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: [email protected] Europe Sales: [email protected] U.S. Sales: [email protected] Distributor Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2013 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05413.R5 12/14 Page 10 www.protekdevices.com