SRV05-4-A - ProTek Devices

05482
SRV05-4-A
Only One Name Means ProTek’Tion™
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY
DESCRIPTION
The SRV05-4-A is a dual USB port protection array that features ultra low capacitance. This device can be used in
applications such as video cards, SMART phones, Gigabit Ethernet and other computer interfaces. Designed for ESD
protection, the SRV05-4-A can clamp the effects of electrical fast transients on the power bus.
The SRV05-4-A combines 8 low capacitance steering diodes for up to four individual data or transmission lines and
one TVS diode for power bus protection. This device is available in the space-saving SOT-23-6 package configuration,
which minimizes lead inductance to prevent overshoot voltages during high ESD current events. SRV05-4-A meets the
IEC 61000-4-2, 61000-4-2 and 61000-4-5 requirements with ESD measured at ±30kV contact and air discharge.
SOT-23-6 PACKAGE
FEATURES
APPLICATIONS
• Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns
• Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line0
• 250 Watts Peak Pulse Power per Line(tp = 8/20µs)
• ESD Protection > 25 kilovolts
• Low Clamping Voltage
• Protection for 4 Lines
• Ultra Low Capacitance (Typical): 3.0pF I/O to GND, 1.5pF I/O to I/O
• RoHS Compliant
• REACH Compliant
• Gigabit Ethernet
• SMART Phones
• Portable Electronics
• Video Card Interfaces
• USB 2.0 Interfaces
• DVI Interfaces
MECHANICAL CHARACTERISTICS
• Molded JEDEC SOT-23-6 Package
• Approximate Weight: 16 milligrams
• Lead-Free Nickel Paladium Gold Plating
• Solder Reflow Temperature - 260-270°C
• Flammability Rating UL 94V-0
• 8mm Tape and Reel per EIA Standard 481
PIN CONFIGURATION
05482.R3 9/15
I/O 1 1
6 I/O 4
GND 2
5 REF
I/O 2 3
4 I/O 3
Page 1
www.protekdevices.com
05482
SRV05-4-A
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Peak Pulse Power (tp = 8/20µs) - See Figure 1
Operating Temperature
SYMBOL
VALUE
UNITS
PPP
250
Watts
TL
-55 to 125
°C
Storage Temperature
TSTG
-55 to 150
°C
Forward Surge Rating (5ms @ 25°C, IF = 10mA)
VF
0.5 Min. - 1.2 Max.
Volts
Peak Pulse Current (tp = 8/20µs) - Note 1
IPP
12
Amps
NOTES
1. Across TVS only - pin 2 to pin 5.
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
MINIMUM
MAXIMUM
PART
DEVICE
RATED
NUMBER MARKING STAND-OFF BREAKDOWN CLAMPING
VOLTAGE
VOLTAGE
VOLTAGE
(Note 1)
(Note 1)
(Fig. 2)
(Note 1)
@ 1mA
@ I P = 1A
V(BR)
VWM
VC
VOLTS
VOLTS
VOLTS
SRV05-4-A
S5A
5.0
6.0
12.5
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
(Note 1)
@ I P = 5A
VC
VOLTS
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
(Note 1)
@ I P = 12A
VC
VOLTS
17.5
21.0
MAXIMUM
TYPICAL
TYPICAL
LEAKAGE CAPACITANCE CAPACITANCE
CURRENT
(I/O - GND)
(I/O - I/O)
(Note 1)
@V WM
ID
µA
@0V, 1MHz
C
pF
@0V, 1MHz
C
pF
5
3.0
1.5
NOTES
1. Measured from I/O pin to ground.
FIGURE 1
PEAK PULSE POWER VS PULSE TIME
PPP - Peak Pulse Power - Watts
10,000
1,000
250W, 8/20µs Waveform
100
10
0.1
05482.R3 9/15
1
10
100
td - Pulse Duration - µs
Page 2
1,000
10,000
www.protekdevices.com
05482
SRV05-4-A
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 2
PULSE WAVE FORM
IPP - Peak Pulse Current - % of IPP
120
tf
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
Peak Value IPP
80
e-t
60
40
td = t/(IPP/2)
20
0
0
5
100
10
15
t - Time - µs
20
25
30
FIGURE 3
POWER DERATING CURVE
Peak Pulse Power
8/20µs
% Of Rated Power
80
60
40
20
0
05482.R3 9/15
Average Power
0
25
50
75 100 125
TA - Ambient Temperature - °C
Page 3
150
www.protekdevices.com
05482
SRV05-4-A
Only One Name Means ProTek’Tion™
SPICE MODEL
FIGURE 1
SPICE MODEL
VCC
LCRD
LCRD
I/O
I/O
LCRD
LCRD
ABD
LCRD
LCRD
I/O
I/O
LCRD
LCRD
Lg
0.7nH
LCABD - Low Capacitance Avalanche Breakdown Diode (TVS)
LCRD: Low Capacitance Rectifier Diode
Lg - Lead Inductance
TABLE 1 - SPICE PARAMETERS
PARAMETER
05482.R3 9/15
UNIT
ABD(TVS)
LCRD
BV
V
6.0
200
IBV
µA
1
0.01
Cjo
pF
230
3
IS
A
1E-11
1E-13
Vj
V
0.6
0.6
M
-
0.33
0.33
N
-
1
1
RS
Ohms
0.014
0.31
TT
s
1E-9
1E-9
EG
eV
1.11
1.11
Page 4
www.protekdevices.com
05482
SRV05-4-A
Only One Name Means ProTek’Tion™
SOT-23-6 PACKAGE INFORMATION
D
OUTLINE DIMENSIONS
DIM
MILLIMETERS
E
INCHES
MIN
MAX
MIN
MAX
A
2.80
3.05
0.110
0.120
B
1.50
1.75
0.059
0.070
C
0.90
1.30
0.036
0.051
D
0.30
0.40
0.012
0.016
E
0.85
1.05
0.033
0.040
G
0.90
1.45
0.036
0.057
J
0.09
0.20
0.003
0.008
K
2.60
3.00
0.102
0.118
L
0.0
0.15
0.0
0.006
M
0.30
0.60
0.012
0.024
6
4
5
1
3
2
L
G
C
B
PAD LAYOUT DIMENSIONS
INCHES
NOMINAL
NOMINAL
A
0.70
0.028
B
1.90
0.074
C
0.95
0.037
D
2.40
0.094
E
1.00
0.039
M
A
1. Controlling dimension: inches.
2. Dimensioning and tolerances per ANSI Y14.5M, 1985.
3. Dimensions are exclusive of mold flash and metal burrs.
MILLIMETERS
J
B
NOTES
DIM
0° - 8°
K
C
E
D
A
NOTES
1. Controlling dimension: inches.
05482.R3 9/15
Page 5
www.protekdevices.com
05482
SRV05-4-A
Only One Name Means ProTek’Tion™
TAPE AND REEL
P0
P2
D
t
10 Pitches Cumulative
Tolerance on Tape. ± 0.2
E
Top Cover Tape
Pin 1
A0
F
W
K0
B0
P
User Direction of Feed
SPECIFICATIONS
REEL DIA.
TAPE
WIDTH
178mm (7”)
8mm
A0
B0
K0
D
E
F
W
P0
P2
P
3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10
tmax
0.25
NOTES
1.
2.
3.
4.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape.
Marking on Part - marking code (see page 2) and pin one defined by dot on package.
ORDERING INFORMATION
BASE PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
SRV05-4-A
N/A
-T7
3,000
7”
N/A
This device is only available in a Lead-Free configuration.
05482.R3 9/15
Page 6
www.protekdevices.com
05482
SRV05-4-A
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They
include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Asia Sales: [email protected]
Europe Sales: [email protected]
U.S. Sales: [email protected]
Distributor Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05482.R3 9/15
Page 7
www.protekdevices.com