PLC03-3.3LC - ProTek Devices

05411
PLC03-3.3LC
Only One Name Means ProTek’Tion™
HIGH POWER LOW CAPACITANCE TVS ARRAY
DESCRIPTION
The PLC03-3.3LC is a low capacitance, high powered TVS array available in a SO-8 package. This device is designed to
protect high speed data line applications from the damaging effects of ESD, EFT and secondary transient threats.
The PLC03-3.3LC has a peak pulse power rating of 1800 Watts for an 8/20µs waveshape. This devices meets the IEC
61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SO-8 PACKAGE
FEATURES
APPLICATIONS
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compatible with IEC 61000-4-5 (Surge): 94A, 8/20µs - Level 4(LineGnd), 48A, Level 1 (Power) & 48A, Level 4(Line-Line)
• 100A (2/10µs) per Bellcore GR1089 (Intra-Building)
• ESD Protection > 25 kilovolts
• 1800 Watts Peak Pulse Power per Line (tp = 8/20µs)
• Low Capacitance: 6pF Typical
• Telecom/Diode Bridge
• RoHS Compliant
• REACH Compliant
• T1/E1 Line Cards
• ISDN U-Interfaces & ISDN S/T Interfaces
• xDSL Interfaces
• Ethernet 10/100/1000 Base T
• Set Top Box Interface
MECHANICAL CHARACTERISTICS
• Molded JEDEC SO-8 Package
• Approximate Weight: 70 milligrams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 12mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
PIN CONFIGURATION
05411.R0 3/15
8
7
6
5
1
2
3
4
Page 1
www.protekdevices.com
05411
PLC03-3.3LC
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
TL
-55 to 150
°C
Storage Temperature
TSTG
-55 to 150
°C
Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
1800
Watts
Operating Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
PLC03-3.3LC
DEVICE
MARKING
PBLC
RATED
STAND-OFF
VOLTAGE
MINIMUM
SNAPBACK
VOLTAGE
VWM
VOLTS
@50mA
V(BR)
VOLTS
3.0
2.8
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
(Note 1-2)
MAXIMUM
LEAKAGE
CURRENT
@ 8/20µs
V C @ IPP
MAXIMUM
CLAMPING
VOLTAGE
(Line-Gnd)
@ 8/20µs
@I P = 50A
VC
VOLTS
MAXIMUM
MAXIMUM
CAPACITANCE CAPACITANCE
(Note 3)
(Note 4)
@V WM
ID
µA
@0V, 1MHz
C
pF
@0V, 1MHz
C
pF
18.0V @ 100.0A
14.0
2.0
6
3
NOTES
1.
2.
3.
4.
For an 8/20µs waveform, apply positive pulse to pin 1 or 8 to pin 2 or 3 (ground).
Measured between pin 1 or 8 to pin 2 or 3.
Measured between I/O pins and ground (pin 1 to 2).
Measured between I/O pins (pin 1 to 4).
05411.R0 3/15
Page 2
www.protekdevices.com
05411
PLC03-3.3LC
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 1
PEAK PULSE POWER VS PULSE TIME
PPP - Peak Pulse Power - kilowatts
100
10
1800W, 8/20µs Waveform
1
0.1
0.1
10
100
td - Pulse Duration - µs
Peak Value IPP
80
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
e-t
60
40
10,000
FIGURE 3
POWER DERATING CURVE
Peak Pulse Power
8/20µs
80
% Of Rated Power
tf
100
td = t/(IPP/2)
60
40
20
20
0
1,000
FIGURE 2
PULSE WAVE FORM
120
IPP - Peak Pulse Current - % of IPP
1
0
05411.R0 3/15
5
10
15
t - Time - µs
20
25
30
Page 3
0
Average Power
0
25
50
75 100 125
TA - Ambient Temperature - °C
150
www.protekdevices.com
05411
PLC03-3.3LC
Only One Name Means ProTek’Tion™
SO-8 PACKAGE INFORMATION
OUTLINE DIMENSIONS
DIM
MILLIMETERS
-A-
INCHES
MIN
MAX
MIN
MAX
A
4.80
5.00
0.189
0.196
B
3.80
4.00
0.150
0.157
C
1.35
1.75
0.054
0.068
D
0.35
0.49
0.014
0.019
F
0.40
1.25
0.016
0.049
G
1.27 BSC
8
5
-B-
1
G
4
D
0.18
0.25
0.007
0.009
K
0.10
0.25
0.004
0.008
P
5.80
6.20
0.229
0.244
R
0.25
0.50
0.010
0.019
R x 45°
C
0.05 BSC
J
+ 0.010” (0.25mm) M B M
4 PL
P
0° - 10°
-T-
K
+ 0.010” (0.25mm) M T B S A S
8 PL
J
F
NOTES
1.
2.
3.
4.
5.
6.
-T- = Seating plane and datum surface.
Dimensions “A” and “B” are datum.
Dimensions “A” and “B” do not include mold protrusion.
Maximum mold protrusion is 0.015” (0.380mm) per side.
Dimensioning and tolerances per ANSI Y14.5M, 1982.
Dimensions are exclusive of mold flash and metal burrs.
A
PAD LAYOUT DIMENSIONS
DIM
MILLIMETERS
B
INCHES
MIN
MAX
MIN
MAX
A
1.14
1.40
0.045
0.055
B
0.64
0.89
0.025
0.035
C
6.22
-
0.245
-
D
3.94
4.17
0.155
0.165
E
1.02
1.27
0.040
0.050
NOTES
1. Controlling dimension: inches.
05411.R0 3/15
D
C
E
Page 4
www.protekdevices.com
05411
PLC03-3.3LC
Only One Name Means ProTek’Tion™
TAPE AND REEL
P0
D
t
10 Pitches Cumulative
Tolerance on tape ± 0.2
P2
E
F
W
K0
B0
A0
P
User Direction of Feed
SPECIFICATIONS
REEL DIA.
TAPE
WIDTH
178mm (7”)
12mm
A0
B0
K0
D
E
F
W
P0
P2
P
tmax
6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10
0.25
NOTES
1.
2.
3.
4.
5.
6.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape.
Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape.
Bulk product shipped in tubes of 98 pieces per tube.
Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package.
ORDERING INFORMATION
BASE PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
PLC03-3.3LC
N/A
-T7
1,000
7”
98
PLC03-3.3LC
N/A
-T13
2,500
13”
98
This device is only available in a Lead-Free configuration.
05411.R0 3/15
Page 5
www.protekdevices.com
05411
PLC03-3.3LC
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They
include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Asia Sales: [email protected]
Europe Sales: [email protected]
U.S. Sales: [email protected]
Distributor Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2015 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05411.R0 3/15
Page 6
www.protekdevices.com