05113 30KPA30A - 30KPA360A Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT 30kW POWER TVS COMPONENT DESCRIPTION The 30KPA Series, are discrete 30,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 30KPA series is available in voltages ranging from 30V to 360V with 5 percent and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatible with IEC 61000-4-5 (Surge) requirements. AXIAL LEAD PACKAGE FEATURES APPLICATIONS • RTCA DO-160G COMPLIANT PRODUCT • UL File Recognition #E208219 • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(LineGround), L4(Line-Line) & L1 (Power) • 30,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bidirectional Configurations • Easy Mounting to Printed Circuit Board • tClamping (0V to VBR Min.) < 1 x 10-12 seconds theoretical • Available in Multiple Voltages Ranging From 30V to 360V • RoHS Complaint (Exemption #7) • Relay Drives • Motor (Start/Stop) Back EMF Protection • Module Lightning Protection • Secondary Lightning Protection for AC/DC MECHANICAL CHARACTERISTICS • Molded Case • Approximate Weight: 5 grams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 CIRCUIT DIAGRAMS UNIDIRECTIONAL 05113.R36 9/15 BIDIRECTIONAL Page 1 www.protekdevices.com 05113 30KPA30A - 30KPA360A Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT 30kW POWER TVS COMPONENT MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 10/1000µs) - See Figure 1 SYMBOL VALUE UNITS PPP 30,000 Watts Forward Surge Rating - 1/120 seconds - See Note 2 IF 200 Amps Steady State Power Dissipation PP 8.0 Watts Storage Temperature TSTG -55 to 150 °C TL -55 to 150 °C Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1 - 2) RATED STAND-OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE MIN V(BR) VOLTS MAXIMUM LEAKAGE CURRENT @I T mA @V WM ID µA MAXIMUM CLAMPING VOLTAGE (Fig. 2) TEMPERATURE COEFFICIENT OF V(BR) @ 10/1000µS V C @ IPP qV(BR) mV/°C 30KPA30A 30.0 33.3 50 5000 55.2V @ 543.0A 34 30KPA33A 33.0 36.7 50 5000 58.6V @ 512.0A 39 30KPA36A 36.0 40.0 50 2000 61.8V @ 485.0A 41 30KPA43A 43.0 47.8 50 1000 73.0V @ 410.0A 50 30KPA48A 48.0 53.3 5 250 77.4V @ 388.0A 56 30KPA54A 54.0 60.0 5 20 91.4V @ 331.5A 64 30KPA58A 58.0 64.4 5 20 92.4V @ 325.0A 68 30KPA64A 64.0 71.1 5 10 104.0V @ 294.0A 76 30KPA70A 70.0 77.8 5 2 109.0V @ 274.0A 83 30KPA72A 72.0 80.4 5 2 114.0V @ 265.0A 85 30KPA75A 75.0 83.3 5 2 119.4V @ 251.0A 89 30KPA78A 78.0 87.10 5 2 129.0V @ 234.9A 92 30KPA85A 85.0 94.4 5 2 139.0V @ 216.0A 105 30KPA90A 90.0 100.0 5 2 147.0V @ 206.0A 109 30KPA100 100.0 111.0 5 2 179.0V @ 168.0A 134 30KPA100A 100.0 111.0 5 2 162.0V @ 186.0A 121 30KPA102A 102.0 114.0 5 2 166.0V @ 183.0A 124 30KPA110A 110.0 122.0 5 2 178.0V @ 168.0A 126 30KPA130A 130.0 144.0 5 2 209.0V @ 142.0A 157 30KPA150A 150.0 167.6 5 2 233.4V @ 129.8A 195 NOTES 1. Part numbers shown are unidirectional devices. Add a “CA” suffix to specify bidirectional devices, such as 30KPA30CA. 2. VF = 15 Volts @ 200A, 8.3ms(1/2 Sine Wave) - Unidirectional devices only. 05113.R36 9/15 Page 2 www.protekdevices.com 05113 30KPA30A - 30KPA360A Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT TYPICAL DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Notes 1 - 2) RATED STAND-OFF VOLTAGE 30KPA160A BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT MAXIMUM CLAMPING VOLTAGE (Fig. 2) TEMPERATURE COEFFICIENT OF V(BR) VWM VOLTS MIN V(BR) VOLTS @I T mA @V WM ID µA @ 10/1000µS V C @ IPP qV(BR) mV/°C 160.0 178.0 5 2 252.6V @ 119.0A 195 30KPA170A 170.0 189.0 5 2 274.0V @ 110.0A 207 30KPA180A 180.0 200.0 5 2 291.0V @ 104.0A 230 30KPA200A 200.0 222.0 5 2 320.0V @ 94.0A 250 30KPA220A 220.0 245.0 5 2 356.0V @ 84.0A 269 30KPA250A 250.0 277.0 5 2 404.0V @ 74.0A 314 30KPA260A 260.0 289.0 5 2 416.0V @ 72.0A 317 30KPA280A 280.0 311.0 5 2 464.0V @ 65.0A 342 30KPA300A 300.0 334.0 5 2 484.0V @ 62.0A 368 30KPA320A 320.0 356.0 5 2 530.0V @ 57.0A 370 30KPA360A 360.0 400.0 5 2 640.0V @ 55.0A 380 NOTES 1. Part numbers shown are unidirectional devices. Add a “CA” suffix to specify bidirectional devices, such as 30KPA30CA. 2. VF = 15 Volts @ 200A, 8.3ms(1/2 Sine Wave) - Unidirectional devices only. FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kilowatts 1,000 100 30kW, 10/1000µs Waveform 10 1 0.1 05113.R36 9/15 1 10 100 td - Pulse Duration - µs Page 3 1,000 10,000 100,000 www.protekdevices.com 05113 30KPA30A - 30KPA360A Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT TYPICAL DEVICE CHARACTERISTICS FIGURE 3 POWER DERATING CURVE FIGURE 2 PULSE WAVEFORM 100 TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP tf td = t/(IPP/2) 50 60 40 20 e-t 0 0 1 2 0 3 0 25 50 75 100 125 150 TL - Lead Temperature - °C t - Time - ms FIGURE 4 TYPICAL JUNCTION CAPACITANCE CJ - Junction Capacitance - pF 100,000 Bidirectional V-0V 10,000 Unidirectional V-0V 1,000 Unidirectional @ VR Bidirectional @ VR TJ = 25°C f = 1MHz 100 05113.R36 9/15 0 100 200 VBR - Reverse Breakdown Voltage - V Page 4 300 www.protekdevices.com 05113 30KPA30A - 30KPA360A Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT AXIAL LEAD PACKAGE INFORMATION OUTLINE DIMENSIONS MILLIMETERS DIM INCHES MIN MAX MIN MAX A 24.5 - 1.00 - B 8.60 9.10 0.34 0.36 C 24.5 - 1.00 - D 1.20 DIA. 1.30 DIA. 0.048 DIA. 0.052 DIA. E 8.60 9.10 0.34 0.36 A E NOTES 1. Dimensions are exclusive of mold flash and metal burrs. B C D ORDERING INFORMATION BASE PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE QTY 30KPAxx -LF n/a n/a n/a n/a 30KPAxxA -LF n/a n/a n/a n/a 30KPAxxCA -LF n/a n/a n/a n/a NOTES MARKING DIAGRAM 1. Marking on Part - logo, part number, date code and positive terminal marked with band(unidirectional only). P Page 5 yyww 30KPAxxx 05113.R36 9/15 www.protekdevices.com 05113 30KPA30A - 30KPA360A Only One Name Means ProTek’Tion™ RTCA DO-160G COMPLIANT PRODUCT COMPANY INFORMATION COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Asia Sales: [email protected] Europe Sales: [email protected] U.S. Sales: [email protected] Distributor Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2014 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05113.R36 9/15 Page 6 www.protekdevices.com