05426 SP511401A Only One Name Means ProTek’Tion™ smart power protector for ac ports Description The SP511401A is a unique multi-function resettable protective module, specifically designed for the small power AC port overall safety protection. FUSE Features applications • Dual Protection: Over-Voltage and Over-Current • High Voltage Endurance • Fast Response Time • Compliant with IEC 60738 Thermistors: Directly Heated Positive Temperature Coefficient • Compliant with IEC 61643: Low Voltage Power Distribution Systems Requirements and Tests • Compliant with UL 1434 Thermistors • Compliant with UL 1449_ED3 Surge Protective Devices • RoHS & REACH Compliant • Small Power Charger • Small Power Energy Saving Lights • Other Small AC Power Equipment Mechanical characteristics • ?? Package • Approximate Weight: 2.75 grams • Lead-Free circuit diagram L1 L2 L3 05426.R0 7/13 Page 1 www.protekdevices.com 05426 SP511401A Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Rated Voltage (RMS) Maximum Voltage (RMS) Operating Temperature Range SYMBOL VALUE UNITS UR 220 Volts UMax 240 Volts TW -40 ~ +60 °C ELECTRICAL CHARACTERISTICS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS UR 220 Volts AC UMAX 240 Volts AC Resistance of Internal Series PTC R25 4±20% Ohms PTC Hold Current @ 25°C, 230VAC IHD ≤ 480 mA PTC Hold Current @ 60°C, 230VAC IHD ≤ 380 mA PTC Trip Current: 230VAC ISW ≥ 800 mA PTC Residual Current: 230VAC IRES ≤ 12 mA PTC Switching Time: 230VAC, 2A tSW ≤6 Seconds PTC Recovery Time @ 25°C, in Still Air tR < 90 Seconds PTC Over-Current Withstanding @ 25°C, 230VAC ISMAX < 20 Amps PTC Over-Temperature Protection TOTP > 125 °C Embedded MOV Varistor Voltage @ 1mA U1mA > 450 VDC Limit-Current, Over Voltage Withstanding: RS = 100Ω, UL 1449ED3 UOV > 480 VAC Lightning Surge Protection Level: 1.25/50µs Waveform, RS = 2Ω VLS ≤4 KVp Clamping Output Voltage @ 4kV, 1.25/50µs Waveform, RS = 2Ω VCLP < 1.1 KVp Temporary Overvoltage Withstanding: 600VAC, 1A, 1 second N > 20 Times Leakage Current @ 230VAC, 25°C ILK < 10 µA UINS ≥ 1500 VDC Rated Working Voltage Maximum Continuously Working Voltage Coating Dielectric Strength @ 25°C, VDC 05426.R0 7/13 Page 2 www.protekdevices.com 05426 SP511401A Only One Name Means ProTek’Tion™ typical device characteristics environmental testing PARAMETER conditions criteria Pull the pin axially, stepping add the force to 9.8N, keep 10 seconds, then measure the resistance. |DR25/R25|≤20% |DU1mA/U1mA |≤20% Dip Soldering, Temperature 235°C Good Soldering Dip Soldering, Temperature 350°C, Dip Time 3.5±0.5 seconds, then measure the device resistance. |DR25/R25|≤20% |DU1mA/U1mA |≤20% Vibration Fix the device on the testing plate. Vibrate along X-axis and Y-axis respectively. Frequency 10Hz to 55Hz within 1 minute.; Displacement 0.75mm, time 45 minutes, then measure the device resistance |DR25/R25|≤20% |DU1mA/U1mA |≤20% Collision Fix the device on the collision plate. Acceleration 10m/s2, time 11ms. Frequency 60-80 cycle/minute along X-axis and Y-axis respectively, 1000 cycles, then measure the resistance |DR25/R25|≤20% |DU1mA/U1mA |≤20% Constant Humidity and Temperature Place the device in the condition 40°C 90%-95%, 48 hours, then measure the resistance |DR25/R25|≤20% |DU1mA/U1mA |≤20% High Temperature Place the device at 70°, then measure the resistance |DR25/R25|≤20% |DU1mA/U1mA |≤20% Low Temperature Place the device at -40°C, then measure the resistance |DR25/R25|≤20% |DU1mA/U1mA |≤20% Temperature Change Place the device alternately between low temperature (-40°C) and high temperature (70°C), 2 minute transfer, 5 cycles, then measure the resistance |DR25/R25|≤20% |DU1mA/U1mA |≤20% Terminal Strength Solderability Solder Heat Withstand After the environmental testing, keep the device in still air for 2 hours under normal atmospheric conditions, then being to verify the other parameters. figure 1 typical protection circuit SP511301A L1 L2 VCC Line BR EMI + C1 GND L3 Neutral Layout safety spacing requirements (in accordance with requirements of 4KV 1.25/50µs lightning protection level): • The spacing between pad edge of pin L1 and L2 is 5mm minimum. • The spacing between pad edge of pin L1 and pin L3 is 6mm minimum. • The spacing between pad edge of pin L2 and pin L3 is 3mm minimum and preferably increasing insulation by slotting. 05426.R0 7/13 Page 3 www.protekdevices.com 05426 SP511401A Only One Name Means ProTek’Tion™ package OUTLINE AND PAD LAYOUT information outline dimensions millimeters dim B A inches min max min max A - 13 - 0.51 B - 8 - 0.31 C - 16 - 0.63 D 3.0 3.5 0.12 0.14 E 4.6 5.6 0.18 0.22 F 3.4 4.4 0.13 0.17 G1 0.5 0.7 0.02 0.03 G2 0.5 0.7 0.02 0.03 G3 0.5 0.7 0.02 0.03 G4 0.2 0.4 0.008 0.016 J1 2.5 3.5 0.10 0.14 J2 2.0 3.0 0.08 0.12 C G1 G4 G2 L1 G3 L3 L1 L2 Front View NOTEs 1. L1 - Line in. 2. L2 - Line out. 3. L3 - Neutral. E L2 Side View L3 D F J2 J1 Bottom View ORDERING INFORMATION base PART NUMBER marking SP511401A Part Number and Date Code 05426.R0 7/13 Page 4 www.protekdevices.com 05426 SP511401A Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2013 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05426.R0 7/13 Page 5 www.protekdevices.com