WPANT30078-R1A 4G Cellular Panel Antenna Description / Application This is a High Gain 4G Cellular directional antenna that can be used for base-stations. It comes with a Type-N female connector. The antenna is at DC ground to ensure protection against lightning. We can assist your engineers to optimize mounting positions for these antennas in your applications and can further customize the antennas for your specific needs. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] 698 – 960 MHz 50Ω 1710 – 2700 MHz 50Ω VSWR – Typical < 2.5:1 < 2.5:1 Peak Gain [dBi] (Typical) 11 dBi 12 dBi Vertical Vertical Polarization Pattern Directional (> 20 dB front-to-back ratio) Horizontal Beamwidth (Typical) 55° – 80° Vertical Beamwidth (Typical) 20° – 40° Electrical Downtilt Accepted Power [W] (Max) Lightning Protection 0° 500 Watts DC ground Mechanical / Environmental Properties Antenna Dimensions Antenna Weight Antenna Color Connector Antenna Radome Mechanical Tilt Pole Diameter Max Wind Speed Operating / Storage Temperature Environmental Hazardous Materials Rev: 2.0 Created on: June 24, 2013 26’’ X 11’’ X 5.3’’ 9.9 lbs Grey (660mm X 280mm X 135mm) (4.5 kg) Type-N Female UPVC 0 – 16 degrees 2’’ – 3.15’’ (50 – 80 mm) 60 m/s o o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Rev: 2.0 Created on: June 24, 2013 Created by: MKS Approved by: BP Page | 2 Rev: 2.0 Created on: June 24, 2013 Created by: MKS Approved by: BP Page | 3 Radiation Patterns of the Antenna 750 MHz 870 MHz Rev: 2.0 Created on: June 24, 2013 Created by: MKS Approved by: BP Page | 4 1860 MHz 2150 MHz Rev: 2.0 Created on: June 24, 2013 Created by: MKS Approved by: BP Page | 5 2450 MHz ] 2700 MHz Rev: 2.0 Created on: June 24, 2013 Created by: MKS Approved by: BP Page | 6