WPANTDP071-R1A Mag Mount L1 GPS Antenna Picture of the Part Application The WPANTDP071-R1A antenna is a Mag-mount L1 band passive GPS Antenna for automobile applications. The standard cable length for this antenna is 3 meters and the standard connector is SMA. It can be also configured for different cable lengths and connectors. WP Wireless can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. WP Wireless specializes in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Parameter Antenna Performance Operating Frequency Recommended Impedance of the customer Radio Module[Ω] VSWR – Typical Peak Gain [dBi] (Typical) Polarization Accepted Power [W] (Max) 1567 – 1583 MHz 50Ω <2:1 3 dBi RHCP 2 Watts WP Wireless — A Division of World Products LLC. || 19656 Eighth Street East || Sonoma, CA, 95476, USA [O]: +1-707-996-5201 || [F]: +1-707-996-3380 || [E]: [email protected] || [W]: www.wp-wireless.com Page 1 of 2 Rev: 1.0 Created on: Oct. 16th 2012 Created by: MKS Approved By: BP WPANTDP071-R1A Mag Mount L1 GPS Antenna Mechanical / Environmental Properties Item Value Total Antenna Dimensions 40mm x 39mm x 14mm (LxWxH) Antenna Color Black Cable 3 meters long RG174 Connector SMA Operating / Storage Temperature -40 C to +90 C Environmental Meets standards for UL 94V-0 Hazardous Materials RoHS compliant o o Picture of the Antenna WP Wireless — A Division of World Products LLC. || 19656 Eighth Street East || Sonoma, CA, 95476, USA [O]: +1-707-996-5201 || [F]: +1-707-996-3380 || [E]: [email protected] || [W]: www.wp-wireless.com Page 2 of 2 Rev: 1.0 Created on: Oct. 16th 2012 Created by: MKS Approved By: BP