DG60 ultra miniature pcb automotive relay • Ultra miniature - only 14.3 x 7.5 x 13.8mm and extremely light weight • Single and Twin relays • Ultra Low voltage operate version • Reflow Solder compatible version • RoHS Compliant Contacts Contact number & arrangement SPDT (1 Form C); 2 x SPDT (2 x 1 Form C) Contact material AgSnO2 Max. switching voltage Min. switching current / voltage DC 16VDC (consult factory for 24VDC) 1A/6VDC Rated load DC1 25A/12VDC Max. continuous current DC1 25A (1hr @ 20°C) Max. switching current Make 25A Break 25A Initial resistance 100mΩ, max. at 0.1A/6VDC Coil Rated voltage DC 12V Must release voltage DC 1.0V Operating range of supply voltage Rated power consumption See coil tables 1, 2 & 3 DC 0.64W (table 1) / 0.8W (table 2) / 1.1W (table 3) Insulation Insulation resistance 100MΩ at 500VDC, 50%RH Coil insulation UL Class F - standard; UL Class H - reflow compatible version Dielectric strength coil to contact 500Vrms, 1min contact to contact 500Vrms, 1min General Data Operating time (typical) mS 2.5 Release time (typical) mS 1.2 Electrical Life ops 1 x 105 (see Note 2) Mechanical life ops 1 x 106 at 300 ops/min Dimensions Weight L x W x H 14.3 x 7.5 x 13.8mm (SPDT); 14.3 x 14.7 x 13.8mm (2 x SPDT) 4g approx. (SPDT); 8g approx. (2 x SPDT) Ambient temperature storage -40 to 155°C operating -40 to 85°C (-40 to 105°C Reflow version - see Note 3) Shock resistance Functional: 10g 11mS; Destructive: 100g Vibration resistance 5g. 10 - 500Hz Page 1 of 3 Ref: DG60 042710JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 DG60 ultra miniature pcb automotive relay Coil Data (640mW - standard version) Table 1 Coil Voltage Code Nominal Voltage (VDC) Coil Resistance (Ω) ±10% Must operate voltage max. (VDC) Must release voltage min. (VDC) Max allowable voltage at 20°C (VDC) S012 12 225 7.2 1.0 20 Coil Data (800mW - low operate voltage version) Table 2 Coil Voltage Code Nominal Voltage (VDC) Coil Resistance (Ω) ±10% Must operate voltage max. (VDC) Must release voltage min. (VDC) Max allowable voltage at 20°C (VDC) 1012 12 180 6.5 1.0 18 Coil Data (1.1W - ultra low operate voltage version) Table 3 Coil Voltage Code Nominal Voltage (VDC) Coil Resistance (Ω) ±10% Must operate voltage max. (VDC) Must release voltage min. (VDC) Max allowable voltage at 20°C (VDC) L012 12 130 5.5 1.0 18 Cover protection and mounting Coil code Ordering codes Contact material Type D G 6 0 Contact arrangement - - 5 - Contact material 30 - AgSnO2 50 - AgSnO2 (solid - for flashers) Contact arrangement 11 - SPDT (1 C/O, 1 Form C) 22 - 2 x SPDT ( 2 x 1C/O) Cover protection category 2 - in cover, flux tight (for reflow - see Note 3) 3 - in cover, sealed - IP67 Connection mode 5 Page 2 of 3 Ref: DG60 042710JHM - for PCB www.aecsensors.com Sales Department Tel: (888) 847-6552 See coil tables 1, 2 or 3 DG60 ultra miniature pcb automotive relay Overall Dimensions Fig. 1 PCB Mounting Dimensions Fig. 2 Mounting Holes (Bottom View) Dimensions in mm Wiring Diagrams (Bottom View) Reference Curves Fig. 3 Load limit curve 225 24 22 22 20 10 0 05 10 20 25 Switching current (A) 30 Coil voltage (VDC) 30 Umax. 18 16 14 12 10 8 18 16 Umax. 14 12 10 8 6 Upick-up (initial) 6 4 4 2 2 0 -60 coil resistance 20 20 Coil voltage (VDC) Switching voltage( VDC) 40 180 coil resistance 24 Upick-up (initial) 0 -40- 20 02 04 06 08 01 Ambient temperature (°C) 00 -60- 40 -200 20 40 Notes: 1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC. 2: Electrical life is strongly dependent on switching frequency, On/Off ratio and environmental conditions. 3: Reflow compatible plastics only available in flux tight version and with Class H coil insulation. Consult factory before ordering. Specifications are subject to change without notice. E&OE. Page 3 of 3 Ref: DG60 042710JHM American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516 www.aecsensors.com Sales Department Tel: (888) 847-6552 60 Ambient temperature (°C) 80 100