OSC-2 Oscillator Board (Dumping Resistor Mounting Type) REJ01J0001-0100Z Rev.1.00 2004.04.16 Function The OSC-2 is a clock oscillator board that is fitted on an emulation pod or a temporary target board, etc. Users can mount the desired oscillation module on its board. Dimensions 25.0(D)×32.0(W)mm Circuit Diagram 回路図 [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. Rev.1.00 2004.06 Page 111 of 135 OSC-3 Oscillator Board (Oscillation Module Mounting Type) REJ01J0001-0100Z Rev.1.00 2004.04.16 Function The OSC-3 is a clock oscillator board that is fitted on an emulation pod or a temporary target board, etc. Users can mount the desired oscillation module on its board. Suitable Oscillation Module We recommend SG51P series oscillation module made by SEIKO EPSON CORPORATION. For inquiries about more information of SG51P series, contact EPSON TOYOCOM CORPORATION. Dimensions 25.0(D)×31.0(W)mm Circuit Diagram [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. Rev.1.00 2004.06 Page 112 of 135 OSC-4 Oscillator Board (8 and 16MHz Selection Type) REJ01J0001-0100Z Rev.1.00 2004.04.16 Function The OSC-4 is a clock oscillator board that is fitted on an emulation pod or a temporary target board, etc. (already assembled). It has two oscillation frequencies (8 and 16MHz) that can be selected by a switch. Dimensions 25.0(D)×31.0(W)mm [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies. Rev.1.00 2004.06 Page 113 of 135