VXM8 Datasheet 267 Lowell Road Hudson, NH 03051 USA Tel: 1-888-328-7661 Fax: 1-603-598-0075 and fully compatible with lead free assembly Package: 2.5 x 2.0 x 0.7 mm 4 pads Frequency Range: 16 MHz to 60 MHz Mode: 1 = Fundamental Stability: A = ± 100 PPM from - 20°C to + 70°C B = ± 50 PPM from - 20°C to + 70°C C = ± 100 PPM from - 40°C to + 85°C D = ± 50 PPM from - 40°C to + 85°C F = ± 30 PPM from - 20°C to + 70°C M = ± 10 PPM from - 10°C to + 60°C N = ± 15 PPM from - 30°C to + 85°C Load Capacitance (CL): 0 = Series Resonant 1 = 16 pF 2 = 20 pF 3 = 32 pF 4 = 18 pF 5 = 10 pF 6 = 30 pF STD Calibration Tolerance: ± 10 ppm to ±100ppm at +25 ± 3°C ESR: 100 Ohms Max. : 16.000MHz～19.999MHz 80 Ohms Max. : 20.000MHz～29.999MHz 60 Ohms Max. : 30.000MHz～39.999MHz 40 Ohms Max. : 40.000MHz～60.000MHz Shunt Capacitance (Co): 7 pF Maximum Drive Level: 10 to 100 uW Aging: ± 5 PPM/ year Maximum Standard Packaging: Tape and Reel (1000 pcs minimum) Typical P/N: VXM8-1B2-16M000 M8 = 2.5 x 2.0 x 0.6 mm 4 pads 1 = Fundamental Mode B = ± 50 PPM -20°C to + 70°C 2 = 20 pF load Page1/3 Revision: September 23, 2013 VXM8 Datasheet Package Drawing Units: mm Land Pattern (Reference) Tape and Reel Dimensions (mm) Package A B C VXM8 8.0 3.5 D Φ1.5 4.0 E F G H I J 4.0 2.5 21.0 13.0 50.0 2.0 K L 9.5 180.0 J F C D G B A L I E H Page2/3 K Revision: September 23, 2013 VXM8 Datasheet Suggested IR profile The VXM8 are qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time intervals listed are based on the Pb-Free small body requirements and parameters are listed in the table below The VXM8 are hermetically sealed so an aqueous wash is not an issue. Reflow Profile (IPC/JEDEC J-STD-020) Parameter Symbol PreHeat Time tS Ramp Up R UP o Time Above 217 C tL Time To Peak t AMB-P Temperature Time At 260 oC tP Ramp Down R DN 20 sec Min, 40 sec Max 6 oC/sec Max tL 260 R Temperature (DegC) Value 60 sec Min, 180 sec Max 3 oC/sec Max 60 sec Min, 150 sec Max 480 sec Max 217 200 tP R DN 150 tS t AMB-P 25 Time (sec) 267 Lowell Road Hudson, NH 03051 USA Tel: 1-888-328-7661 Fax: 1-603-598-0075 http://www.vectron.com/ Page3/3 Revision: September 23, 2013