UNISONIC TECHNOLOGIES CO., LTD ULN2003R Preliminary LINEAR INTEGRATED CIRCUIT HIGH VOLTAGE HIGH CURRENT DARLINGTON TRANSISTOR ARRAY DESCRIPTION The UTC ULN2003R is high-voltage, high-current darlington transistor arrays. Each consists of seven NPN darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of a single darlington pair is 500mA. All units feature integral clamp diodes for switching inductive loads. Applications include relay, hammer, lamp and display (LED) drivers. The UTC ULN2003R has a 2.7kΩ series base resistor for each darlington pair for operation directly with TTL or 5V CMOS devices. SOP-16 FEATURES * Output Current (Single Output): 500mA max * High Sustaining Voltage Output: 50V min * Inputs Compatible with Various Types of Logic * Output Clamp Diodes * Relay-Driver Applications ORDERING INFORMATION Ordering Number ULN2003RG-S16-R ULN2003RG-S16-R Package SOP-16 (1) Packing Type (1) R: Tape Reel (2) Package Type (2) S16: SOP-16 (3) Green Package (3) G: Halogen Free and Lead Free Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 7 QW-R113-013.a ULN2003R Preliminary INEAR INTEGRATED CIRCUIT PIN CONFIGURATION O1 16 O2 15 O3 14 O4 13 O5 12 O6 11 O7 COMMON 9 10 1 I1 2 I2 3 I3 4 I4 5 I5 6 I6 7 I7 8 GND PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PIN NAME I1 I2 I3 I4 I5 I6 I7 GND COMMON O7 O6 O5 O4 O3 O2 O1 DESCRIPTION 1 Channel Input Pin 2 Channel Input Pin 3 Channel Input Pin 4 Channel Input Pin 5 Channel Input Pin 6 Channel Input Pin 7 Channel Input Pin Ground Clamp Diode 7 Channel Output Pin 6 Channel Output Pin 5 Channel Output Pin 4 Channel Output Pin 3 Channel Output Pin 2 Channel Output Pin 1 Channel Output Pin UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 7 QW-R113-013.a ULN2003R Preliminary INEAR INTEGRATED CIRCUIT BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 7 QW-R113-013.a ULN2003R Preliminary INEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-Emitter Voltage VCE -0.5~50 V Clamp Diode Reverse Voltage VCOM 50 V Input Voltage VI -0.5~30 V Peak Collector Current ICP 500 mA Output Clamp Current IOK 500 mA Total Emitter-Terminal Current IET -2.5 A Power Dissipation (Note 1, 2) PD 0.54 / 0.065 (Note 3) W Junction Temperature (Note 2) TJ 150 °C Storage Temperature TSTG -60~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The maximum allowable power dissipation at any allowable ambient temperature is PD= (TJ-TA)/θJA. 3. On glass epoxy PCB (30x30x1.6mm Cu 50%). RECOMMENDED OPERATING CONDITIONS (TA=25°C, unless otherwise specified) PARAMETER Output Sustaining Voltage Output Current Input Voltage Input Voltage (Output On) Input Voltage (Output Off) Clamp Diode Reverse Voltage Clamp Diode Forward Current Operating Temperature Range Power Dissipation SYMBOL VCE IOUT VIN VIN (ON) VIN (OFF) VR IF TA PD TEST CONDITIONS TPW=25ms, Duty=10% TA=85°C, TJ=120°C Duty=50% IOUT=400mA MIN 0 0 0 0 2.8 0 TYP MAX UNIT 50 V 233 mA/ch 70 mA/ch 24 V 24 V 0.7 V 50 V 350 mA +85 °C 0.325 W TYP MAX UNIT -40 TA=85°C ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) SYMBOL TEST CIRCUIT VI(ON) 4 VCE(SAT) 5 Clamp Diode Forward Voltage VF Output Leakage Current ICEX 8 1 2 PARAMETER Input Voltage (Output On) Collector-Emitter Saturation Voltage Input Current Clamp Diode Reverse Current Input Capacitance Propagation Delay Time, Low- to High Propagation Delay Time, High - to Low IC=200mA IC=250mA IC=300mA VIN=2.4V, IC=30mA VIN=2.4V, IC=60mA VIN=2.4V, IC=120mA VIN=2.4V, IC=240mA VIN=2.4V, IC=350mA IF=350mA VCE=50V, II=0 VCE=50V, TA=85°C, VI=0V VIN=12V VIN=6V IC=60mA VIN=4.5V VIN=2.4V VR=50V VCE=2V MIN 1.9 2.0 2.1 0.78 0.82 0.9 1.1 1.25 1.6 2.4 2.7 3 2.0 50 100 7 3.2 2.3 0.95 V V V V V V V V V μA μA mA mA mA mA μA pF II 4 IR CIN 7 tPLH 9 VL=12V, RL=45Ω 0.15 1 μs tPHL 9 VL=12V, RL=45Ω 0.15 1 μs 100 15 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS 4 of 7 QW-R113-013.a ULN2003R Preliminary INEAR INTEGRATED CIRCUIT TEST CIRCUIT 4. II 3. II(off) Open Open VCE II(off) II(on) IC VI 5. hFE,VCE(sat) Open 6. VI(on) Open Open hCE=IC/II II VCE IC UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw VI(on) VCE IC 5 of 7 QW-R113-013.a ULN2003R Preliminary INEAR INTEGRATED CIRCUIT TEST CIRCUIT (Cont.) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R113-013.a ULN2003R Preliminary INEAR INTEGRATED CIRCUIT TYPICAL APPLICATION CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R113-013.a