UNISONIC TECHNOLOGIES CO., LTD MBR10100 Preliminary DIODE 10A SCHOTTKY BARRIER RECTIFIER DESCRIPTION 1 TO-220F1 The UTC MBR10100 is a 10A schottky barrier rectifier, it uses UTC’s advanced technology to provide the customers with high surge capability, high efficiency, high current capability, low power loss and low forward voltage drop, etc. The UTC MBR10100 is suitable for free wheeling and polarity protection, etc. 1 TO-277 FEATURES * Low Reverse Current * Low Stored Charge, Majority Carrier Conduction * Low Power Loss/High Efficiency * Highly Stable Oxide Passivated Junction SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR10100L-TF1-T MBR10100G-TF1-T MBR10100L-T27-T MBR10100G-T27-T Note: Pin Assignment: A: Anode K: Cathode MBR10100L-TF1-T Package TO-220F1 TO-277 Pin Assignment 1 2 3 A K A A K A Packing Tube Tape Reel (1)Packing Type (1) T: Tube (2)Package Type (2) TF1: TO-220F1, T27: TO-277 (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING TO-220F1 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd TO-277 1 of 3 QW-R202-014.b MBR10100 Preliminary DIODE ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified) Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Working Peak Reverse Voltage VRWM 100 V Repetitive Peak Reverse Voltage VRRM 100 V Maximum RMS Reverse Voltage VRMS 70 V DC Blocking Voltage VR 100 V Average Rectified Output Current (TA=105°C) IO 10 A Peak Forward Surge Current 8.3ms Single Half IFSM 150 A Sine-Wave Superimposed on Rated Load Junction Temperature TJ -55~+150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL RATINGS TO-220F1 50 Junction to Ambient θJA TO-277 73 (Note) TO-220F1 3 Junction to Case θJC TO-277 13 (Note) Note: Mounted on an FR4 PCB, single-sided copper, with 100 cm2 copper pad area. UNIT °C/W °C/W °C/W °C/W ELECTRICAL CHARACTERISTICS (Note 2) PARAMETER SYMBOL TEST CONDITIONS IF=10A, TC=25°C Instantaneous Forward Voltage Drop VF IF=10A, TC=125°C Rated DC Voltage, TC=25°C Instantaneous Reverse Current IR Rated DC Voltage, TC=125°C Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.80 V 0.75 50 μA 15 mA 2 of 3 QW-R202-014.b MBR10100 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-014.b