AZ2150 MINIATURE POWER RELAY FEATURES • 30 Amp switching capability for both N.O. and N.C. contacts • 1 Form A, B and C contacts available • Life expectancy to 10 million operations • Class B insulation standard • Class F (155°C) version available • Available with an epoxy seal for automatic wave soldering and immersion cleaning • Proof Tracking Index (PTI/CTI) 175 • UL, CUR file E44211 including versions meeting UL 508 and UL 873 spacing and contact rating requirements; • VDE certificate 40023154 (AZ2150-1A and 1C only) CONTACTS Arrangement Ratings SPDT (1 Form C), SPST (1 Form A and 1 Form B) GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. (N.O.) Operate Time Max. 12 ms Typical: 8 ms Release Time Max. 5 ms Typical: 3.5 ms Resistive load: Max. switched power: 900 W or 7200 VA Max. switched current: 30 A Max. switched voltage: 30 VDC* or 300 VAC Dielectric Strength 2500 Vrms coil to contact (at sea level for 1 min.) 1500 Vrms between open contacts Insulation Resistance 1000 megohms min. at 500 VDC, 20°C 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -55°C (-67°F) to 85°C (185°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 20 g Enclosure P.B.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 25 grams * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR VDE See chart for UL contact ratings on page 2. AZ2150 series meets UL 508 group A spacing and UL 873 refrigeration and safety control requirements. AZ2151 series meets UL 508 group B spasing requirements. Class F coil wire version - 1 Form A 25 A at 250 VAC, resistive, 10k cycles Class B coil wire version - 1 Form A 20 A at 250 VAC, resistive, 10k cycles Class B & F coil wire version - 1 Form C N.O.: 20 A at 250 VAC, resistive, 10k cycles N.C.: 10 A at 250 VAC, resistive, 10k cycles Material Silver cadmium oxide Resistance < 20 milliohms initially (at rated current, voltage drop method) NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Unsealed relays should not be dip cleaned. Other coil resistances and sensitivities available upon request. Please call the factory. 5. Specifications subject to change without notice. COIL Power At Pickup Voltage (typical) 500 mW Max. Continuous Dissipation 2.2 W at 20°C (68°F) ambient 1.8 W at 40°C (104°F) ambient Temperature Rise 43°C (77°F) at nominal coil voltage Temperature ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-07-03 AZ2150 Maximum Switching Capacity RELAY ORDERING DATA STANDARD RELAYS: 1 Form A (SPST); 508 Group A; UL 873 Version COIL SPECIFICATIONS ORDER NUMBER* Max. Continuous VDC 5 6 9 12 15 18 24 48 70 110 7.3 8.9 13.9 17.5 22.5 27.4 36.1 68.4 104.4 163.2 Coil Resistance ±10% 27 40 97 155 256 380 660 2,560 5,500 13,450 Must Operate VDC 3.75 4.5 6.75 9.0 11.25 13.5 18.0 36.0 52.5 82.5 Unsealed 20 Sealed AZ2150–1A–5D AZ2150–1A–6D AZ2150–1A–9D AZ2150–1A–12D AZ2150–1A–15D AZ2150–1A–18D AZ2150–1A–24D AZ2150–1A–48D AZ2150–1A–70D AZ2150–1A–110D AZ2150–1A–5DE AZ2150–1A–6DE AZ2150–1A–9DE AZ2150–1A–12DE AZ2150–1A–15DE AZ2150–1A–18DE AZ2150–1A–24DE AZ2150–1A–48DE AZ2150–1A–70DE AZ2150–1A–110DE 10 8 AMPERES Nominal Coil VDC 30 AC RESISTIVE LOAD 6 5 4 DC RESISTIVE LOAD 3 2 1 10 20 30 40 STANDARD RELAYS: 1 Form A (SPST); UL 508 Group B Version COIL SPECIFICATIONS ORDER NUMBER* 7.3 8.9 13.9 17.5 22.5 27.4 36.1 68.4 104.4 163.2 27 40 97 155 256 380 660 2,560 5,500 13,450 3.75 4.5 6.75 9.0 11.25 13.5 18.0 36.0 52.5 82.5 AZ2151–1A–5D AZ2151–1A–6D AZ2151–1A–9D AZ2151–1A–12D AZ2151–1A–15D AZ2151–1A–18D AZ2151–1A–24D AZ2151–1A–48D AZ2151–1A–70D AZ2151–1A–110D Load Type Cycles Volts Form A (NO) General Purpose (Inductive) Resistive 100,000 30,000 100,000 100,000 100,000 100,000 6,000 30,000 30,000 100,000 6,000 125 or 240 VAC 277 VAC 125 or 240 VAC 30 VDC 277 VAC 240 VAC 277 VAC 125 VAC 240 VAC 125 or 277 VAC 125 VAC 30 A 30 A 30 A 20 A 20 A 15 A 6A 800 VA 690 VA 690 VA 1 HP 15 A 30 A 15 A 10 A — — 3A 275 VA 275 VA — 1/ HP 4 30 A 30 A — 20 A — — 6A 470 VA 470 VA 690 VA 1 HP 15 A 30 A — 10 A — — 3A 275 VA 275 VA — 1/ HP 4 6,000 30,000 100,000 240 VAC 125 VAC 125 or 277 VAC 2 HP 1 HP 3/ HP 4 1 HP — — 2 HP 1 HP 3/ HP 4 1 HP — — 30,000 125 VAC Motor Load Definite Purpose (LRA-Locked Rotor) (FLA-Full Load) Tungsten 100,000 125 VAC 30,000 240 VAC 100,000 277 VAC 6,000 125 VAC 6,000 240 VAC 6,000 120 VAC 6,000 240 VAC TV–5 25,000 120 VAC TV–3 25,000 120 VAC Note: See AZ2100 Data Sheet for more complete 40% 60% 80% 100% 120% 140% 160% 180% 200% Percent of Nominal Coil Voltage (at 20˚C) 33 LRA 10 FLA — — 33 LRA 10 FLA — — — 3A — — TV–3 TV–3 .020 .130 +– .010 0.51) (3.3 +– 0.25 .090 (2.3) .200 (5.1) .500 (12.7) .690 (17.5) 1.25 (31.80) .110 (2.8) .045 x .045 (1.14 x 1.14) .751 (19.1) .196 (5.0) 1.06 (26.9) .032 x .062 (0.81 x 1.57) Viewed toward terminals Viewed toward terminals 4 x ø .079 (ø 2.0) .400 .300 (10.2) (7.6) .025 x .025 (0.63 x 0.63) WIRING DIAGRAM PC BOARD LAYOUT AZ2150 VERSION 1.00 (25.38) .900 (22.86) 1 FORM A (SPST-NO) 2 x ø .044 (ø 1.0) 1 FORM C (SPDT) 1 FORM B (SPST-NC) AZ2151 VERSION Terminal Eliminated on AZ2150 Versions .150 (3.8) .350 (8.9) .550 (14.0) .700 (17.8) 1 FORM A (SPST-NO) 1 FORM B (SPST-NC) 1 FORM C (SPDT) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany 0 Form C NO NC 96 LRA 33 LRA 60 LRA 30 FLA 10 FLA 20 FLA 82.8 LRA — 82.8 LRA 27 FLA — 27 FLA 80 LRA 33 LRA 60 LRA 30 FLA 10 FLA 20 FLA 60 LRA — 60 LRA 20 FLA — 20 FLA 15 A — 15 A 5A — 5A — 3A — — 3A — TV–5 — TV–5 — TV–3 — UL and CUR approved contact ratings. 300 MECHANICAL DATA UL/CUR File E44211 Approved Contact Ratings Ballast Pilot Duty 200 AZ2151–1A–5DE Coil Temperature Rise AZ2151–1A–6DE 180 AZ2151–1A–9DE 160 AZ2151–1A–12DE 140 AZ2151–1A–15DE 120 AZ2151–1A–18DE 100 AZ2151–1A–24DE 80 30A 60 25A AZ2151–1A–48DE 40 20A AZ2151–1A–70DE 15A 20 0A AZ2151–1A–110DE * Substitute “1B” or “1C” in place of the “1A” to indicate 1 Form B and 1 Form C respectively. To indicate Class F version, add suffix “F”. Form B (NC) 80 100 Coil Temperature Rise ˚C 5 6 9 12 15 18 24 48 70 110 60 VOLTAGE - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-07-03